• material: aluminium
  • 29x2.35" without fender max./ 29"x2.25" with fender max. wheelsize
  • 148x12mm axle standard
  • intube
  • max. 630 Wh
frame size M, L, XL
  • 100mm
  • Tapered
  • 51mm fork offset
  • 29x2.4" max wheelsize
battery Shimano E8036 630Wh
display Shimano SC-E5003
speed sensor Shimano EW-SS301
  • 20mm inner width
  • material: aluminium
  • 110x15mm width front hub
  • 32 spoke holes
  • Centerlock
  • 148x12mm width rear hub
  • 36 spoke holes
  • Centerlock
  • 29x2.2"
  • kevlar bead
  • 29x2.2"
  • kevlar bead
  • including removeable lever, 6/4mm allen key
  • 34 teeth
  • Shimano FCEM600
  • 165 mm for all sizes
bottom bracket included
  • 11-46 teeth
  • 10 speed
chain CNHG54
shifters Shimano Deore M4100
headset MERIDA-8157
  • material: aluminium
  • 35mm diameter
  • 0° stem angle
  • GoPro & Supernova mount
  • 50 mm all sizes
stem size 50 mm all sizes
  • 760mm width
  • 20mm rise
grip MERIDA EXPERT EC
  • material: aluminium
  • 34.9mm diameter
  • 0mm setback
seat clamp MERIDA EXPERT
lights CG-119PG-BLACK(1) / CG-404RG-BLK
kickstand CL-KA98, 29"
pedal VP VPE-537

weighed with 29" wheels and at frame size M

Bike Frame Geometry Image
Frame Size M L XL
Tyre Sizes 29" 29" 29"
Frame Size cm 43 48 53
St Seat Tubes mm 430 480 530
Tt Top Tubes mm 605 625 645
Cs Chain Stays mm 465 465 465
HTA head tube angle [°] 67.5 67.5 67.5
STA seat tube angle [°] 74.5 74.5 74.5
Bd Bottom Bracket Drops mm 62.5 62.5 62.5
Ht Head Tube Lengths mm 120 130 140
Fl Fork Lengths mm 527 527 527
R Reach mm 427 445 462
S Stacks mm 640 650 659
Wb Wheel Base mm 1183 1204 1225
Sh Stand Over Height mm 750 794 835

CATEGORY HIGHLIGHTS

Shimano's EP8 motor offers a perfectly balanced power delivery with up to 85 Nm and has further improved on size, weight, noise and motor drag. The new 630 Wh battery is perfectly integrated into the hydroformed down tube and delivers an impressive range for even longer detours home.

Due to the integrated battery, we were able to offer water bottle cage fixing points, allowing bottles or accessories like a lock or pump to the frame to be fitted into the main frame triangle. Great if you want to keep your back free of hydration packs and backpacks.

The geometry of our eBIG.NINE follows one very simple principle: As sporty as possible, as comfortable as necessary. You ride to work in the morning but fancy a little off-road detour on the way home? No problem – that is what these bikes are made for!

‘K-mount’ featuring bikes have fixing points on the chain stays to fit a MERIDA kickstand while ‘C-mount’ equipped bikes have the fixing point for the rear rack (carrier) integrated. ‘F-mount’ equipped bikes have the fixing points for the mudguards (fenders) already integrated.

Technology

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

IMAGE

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

IMAGE

CASTING MOTOR BRACKET

Sophisticated shape only possible due to casting technology, creating an integrated appearance as well as an extremely strong connection between the E-bike motor and frame for improved performance and reliability.

IMAGE

ENERGY GUARD TWIST

Twist lock mechanism that is located at the top end of the 'Energy Guard' battery cover, for easy locking and unlocking of the protective internal battery cover.