eBIG NINE 300 SE

eBIG NINE 300 SE

 

Contact Local Shop
  • material: aluminium
  • 29x2.25" max. wheelsize
  • 148x12mm axle standard
  • external
  • max. 504 Wh
frame size M, L, XL
  • Coil
  • 100mm
  • Tapered
  • 47mm fork offset
  • 29x2.4" max wheelsize
battery Shimano E8010 504Wh
display Shimano SC-E5000
speed sensor Shimano SM-DUE10
  • 20mm inner width
  • material: aluminium
  • 110x15mm width front hub
  • 32 spoke holes
  • Centerlock
  • 148x12mm width rear hub
  • 36 spoke holes
  • Centerlock
  • 29x2.2"
  • kevlar bead
  • 29x2.2"
  • kevlar bead
  • including removeable lever, 6/4mm allen key
  • 34 teeth
  • Shimano FC-E8000
  • 165 mm for all sizes
bottom bracket included
  • 11-36 teeth
  • 9 speed
chain HG53
shifters Shimano Alivio M3100 9
rear derailleur Shimano Deore RDM592 9
headset Merida 2341 Neck
  • material: aluminium
  • 31.8mm diameter
  • 6° stem angle
  • 80 mm-M, 90 mm-L, 100 mm-XL
stem size 80 mm-M, 90 mm-L, 100 mm-XL
  • material: aluminium
  • 720mm width
  • 10mm rise
grip MERIDA EXPERT EC
  • material: aluminium
  • 30.9mm diameter
  • 15mm setback
seat clamp MERIDA EXPERT clamp
lights CG-119PG-BLACK(1) / CG-404RG-BLK
kickstand CL-KA98, 29"
pedal VP VPE-537

weighed with 29" wheels and at frame size M

Bike Frame Geometry Image
Frame Size M L XL
Tyre Sizes 29" 29" 29"
St Seat Tubes mm 430 480 530
Tt Top Tubes mm 590 610 630
Cs Chain Stays mm 458 458 458
HTA head tube angle [°] 69.5 69.5 69.5
STA seat tube angle [°] 73.5 73.5 73.5
Bd Bottom Bracket Drops mm 65 65 65
Ht Head Tube Lengths mm 115 125 135
Fl Fork Lengths mm 511 511 511
R Reach mm 402 420 437
S Stacks mm 634 643 652
Wb Wheel Base mm 1123 1143 1164
Sh Stand Over Height mm 733 777 819
No. Item-No. Name Info Pieces Torque NM
1 CABLE GUIDE SMART ENTRY
2 CABLE GUIDE SMART ENTRY
3 A2300000213 SCREW M3x0.5 L13.5mm 2 2~4
4 A2151000026 COVER for battery; eBIG.SEVEN sizes XS / S for battery; eBIG.NINE size M 1
5 A2151000025 COVER for battery; eBIG.SEVEN size M for battery; eBIG.NINE sizes L / XL 1
6 A2300000468 SCREW M8x1.25 L18.5mm 3 11~12
7 A2300000469 SCREW M8x1.25 L23mm 3 11~12
8 A2258000012 CABLE GUIDE for M5 fixation 1
9 A2298000004 SCREW M5x0.8 L15mm with washer 1 3~5
10 A2300000185 SCREW M3x0.5 L20.5mm 2 2~4
11 A2311000067 RD-HANGER DH-057 1
12 A2300000048 SCREW M4x0.7 L8mm 1 3~5

To reduce production and delivery times, we are sometimes forced to make last-minute specification changes. Please be aware that those changes might not be reflected on these product pages and images.

 

Technology

IMAGE
Back to overview

PROLITE 66 TRIPLE BUTTED ALUMINUM

When creating high-end aluminium frames, we use our proven PROLITE 66 (6066) aluminium, as it is incredibly light and durable. In addition, it works exceptionally well with our hydroforming technology, allowing us to create complex shapes, featuring triple butted wall thicknesses, an almost carbon-like appearance and the best possible stiffness-to-weight ratio. While lesser alloys might be cheaper, it is the ideal choice for high-performance bicycle frames.

Watch Video
IMAGE
Back to overview

HFS - HYDRO FORMING SYSTEM

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

Watch Video
IMAGE
Back to overview

X-TAPER HEADTUBE

Steering precision is vital to safe and confident handling, and the X-TAPER HEADTUBE allows us to significantly boost this precision. A larger headset diameter at the bottom paired with a smaller one at the top helps to deal with the strains modern riding and equipment can put on the headtube, all without adding unnecessary weight. It allows tapered forks to be fitted with ease and delivers precise and confidence-inspiring steering.

Watch Video
IMAGE
Back to overview

SMOOTH WELDING

This is a process we use to give a nice flat finish to our welds instead of the scaled, 'stack of coins' effect TIG welded joints often have. The welder uses the welding torch to go over the joint twice, helping to smooth out the filler material. It takes a lot of skill to do this, but it delivers strong and smart-looking frames that have the appearance of a carbon fibre frame at first look.

Watch Video
IMAGE
Back to overview

INTERNAL CABLE ROUTING

On the majority of our frames, we run the gear and brake cables and hoses through the frame. The cables enter and exit the frame through smooth sockets, or we use one of our other systems like SMART ENTRY or WIRE PORT to be routed through. Running the cables inside the frame protects them from the elements, gives a clean and neat look and can offer aerodynamic advantages.

Watch Video
IMAGE
Back to overview

SMART ENTRY

Many of our frames offer internal cable routing, where the gear and brake cables are run through the frame for maximum protection and a clean look. Some internally run cables can rattle when riding over uneven surfaces, but our SMART ENTRY system prevents this from happening. Cables, housings and brake hoses are clamped under tension to prevent noisy cable movement. All inlets are completely interchangeable to deal with any kind of cable or wire.

Watch Video
IMAGE
Back to overview

DI2 READY

Shimano's Di2 electronic shifting system offers fast, smooth and reliable shifting. In particular, in the road world, it has proven itself as the primary choice when top performance is at the top of the agenda. With that in mind, we have a broad selection of performance road frames that are Di2 READY and can accommodate the electrical cable, battery and other little tweaks that the system requires.

Watch Video
IMAGE
Back to overview

F-MOUNT

Being able to turn your bike into an all-weather commuter that has mudguards and other fittings can be a real plus, in particular when riding on wet and perhaps muddy roads and tracks on a regular basis. To make fitting easy, some of our bikes are F-MOUNT equipped. These integrated fittings mounts make adding mudguards fast and simple. Please note that some bikes require model-specific mudguards.

Watch Video
IMAGE
Back to overview

K-MOUNT

Integrated mount on the chainstay to fit a Merida kickstand (or any commercial kickstand).

Watch Video
IMAGE
Back to overview

C-MOUNT

Similar to our F-MOUNT, where various fixing points for mudguards are part of the frame offering, the C-MOUNT equipped bikes have the fixing points for a rear rack already integrated, making fitting fast, simple and reliable. The C-MOUNTS are an additional feature that improves the day-to-day versatility by adding loading capacity to your bike, ideal for commuting and shopping trips. Please note that some bikes require model-specific rear racks.

Watch Video
IMAGE
Back to overview

CASTED MOTOR BRACKET

The e-bike motor mount has a sophisticated shape that is only possible to create with casting technology. Casting this piece allows us to create a complex yet lightweight shape that gives an extremely strong connection between the motor and the frame for improved performance and reliability. It also gives the bike and motor a smooth and cleanly integrated appearance.

Watch Video