eBIG NINE 400

Hardtail eMTB with Integrated 630Wh battery powering 85Nm Shimano Steps EP8 motor. Equipped with Shimano Deore 10 speed and Shimano hydraulic disc brakes.
Contact Local Shop

The geometry of the eBig Nine and eBig Seven follows one quite simple principle; as sporty as possible, as comfortable as necessary.

The addition of a motor makes this perfect for commuting to work without arriving bedraggled or feeling worried about being too tired to make it home. Alternatively, its mountain bike geometry, suspension fork, grippy tyres and powerful brakes offer the opportunity to venture further afield.

  • Shimano Steps EP8 85Nm motor
  • Shimano 630Wh internal battery
  • Shimano Deore 10 speed
  • Shimano Hydraulic disc brakes
  • Can be equipped with mudguards and rack
  • material: aluminium
  • 29x2.35" without fender max./ 29"x2.25" with fender max. wheelsize
  • 148x12mm axle standard
  • intube
frame size S, M, L, XL
  • 100mm
  • Tapered
  • 51mm fork offset
  • 29x2.4" max wheelsize
motor unit PC-049, battery cover
display Shimano SC-E5003A
speed sensor Shimano EW-SS301
  • 20mm inner width
  • material: aluminium
  • 110x15mm width front hub
  • 32 spoke holes
  • Centerlock
  • 148x12mm width rear hub
  • 36 spoke holes
  • Centerlock
  • 29x2.2"
  • kevlar bead
  • 29x2.2"
  • kevlar bead
  • including removeable lever, 6/4mm allen key
  • 34 teeth
  • Shimano FCEM600
  • 165 mm for all sizes
bottom bracket included
  • 11-46 teeth
  • 10 speed
chain KMC e10s
shifters Shimano Deore M4100
headset MERIDA-8157
  • material: aluminium
  • 35mm diameter
  • 0° stem angle
  • GoPro & Supernova mount
  • 50 mm all sizes
stem size 50 mm all sizes
  • 760mm width
  • 20mm rise
grip MERIDA EXPERT EC
  • material: aluminium
  • 34.9mm diameter
  • 0mm setback
seat clamp MERIDA EXPERT
lights CG-119PG-BLACK(1) / CG-404RG-BLK
kickstand CL-KA98, 29"
pedal VP VPE-537
Bike Frame Geometry Image
Frame Size S M L XL
Tyre Sizes 29" 29" 29" 29"
St Seat Tubes mm 380 430 480 530
Tt Top Tubes mm 588 605 625 645
Cs Chain Stays mm 465 465 465 465
HTA head tube angle [°] 67.5 67.5 67.5 67.5
STA seat tube angle [°] 74.5 74.5 74.5 74.5
Bd Bottom Bracket Drops mm 62.5 62.5 62.5 62.5
Ht Head Tube Lengths mm 115 120 130 140
Fl Fork Lengths mm 527 527 527 527
R Reach mm 411 427 445 462
S Stacks mm 636 640 650 659
Wb Wheel Base mm 1165 1183 1204 1225
Sh Stand Over Height mm 719 750 794 835

Technology

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

IMAGE

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

X-TAPER HEADTUBE
IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

SMOOTH WELDING
IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

INTERNAL CABLE ROUTING
IMAGE

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

SMART ENTRY
IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a Merida kickstand (or any commercial kickstand).

K-MOUNT
IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

IMAGE

CASTING MOTOR BRACKET

Sophisticated shape only possible due to casting technology, creating an integrated appearance as well as an extremely strong connection between the E-bike motor and frame for improved performance and reliability.

IMAGE

ENERGY GUARD TWIST

Twist lock mechanism that is located at the top end of the 'Energy Guard' battery cover, for easy locking and unlocking of the protective internal battery cover.