eBIG NINE 300 SE

Hardtail eMTB with Shimano Steps E7000 60Nm motor and 504w battery. Equipped with Shimano 9 speed drivetrain and Shimano hydraulic disc brakes.
Contact Local Shop

The geometry of the eBig Nine and eBig Seven follows one quite simple principle; as sporty as possible, as comfortable as necessary.

The addition of a motor makes this perfect for commuting to work without arriving bedraggled or feeling worried about being too tired to make it home. Alternatively, its mountain bike geometry, suspension fork, grippy tyres and powerful brakes offer the opportunity to venture further afield.

  • Shimano Steps E7000 60Nm motor
  • Shimano 504w external battery
  • Shimano 9 speed transmission
  • Shimano Hydraulic disc brakes
  • Can be equipped with mudguards and rack
  • material: aluminium *max. wheelsize 29x2.20" without fender max./ 29"x2.00" with fender max. wheelsize
  • 148x12mm axle standard
  • external
frame size M, L, XL
  • Coil
  • 100mm
  • Tapered
  • 47mm fork offset
  • 29x2.4" max wheelsize
display Shimano SC-E5000A
speed sensor Shimano SM-DUE10
  • 20mm inner width
  • material: aluminium
  • 110x15mm width front hub
  • 32 spoke holes
  • Centerlock
  • 148x12mm width rear hub
  • 36 spoke holes
  • Centerlock
  • 29x2.2"
  • kevlar bead
  • 29x2.2"
  • kevlar bead
  • including removeable lever, 6/4mm allen key
  • 34 teeth
  • Shimano FC-E8000
  • 165 mm for all sizes
bottom bracket included
  • 11-36 teeth
  • 9 speed
chain KMC e9S
shifters Shimano Alivio M3100 9
headset Merida 2341 Neck
  • material: aluminium
  • 31.8mm diameter
  • 5° stem angle
  • 80 mm-M, 90 mm-L, 100 mm-XL
stem size 80 mm-M, 90 mm-L, 100 mm-XL
  • material: aluminium
  • 720mm width
  • 10mm rise
grip MERIDA EXPERT EC
  • material: aluminium
  • 30.9mm diameter
  • 15mm setback
seat clamp MERIDA EXPERT clamp
lights CG-119PG-BLACK(1) / CG-404RG-BLK
kickstand CL-KA98, 29"
pedal VP VPE-537
Bike Frame Geometry Image
Frame Size M L XL
Tyre Sizes 29" 29" 29"
St Seat Tubes mm 430 480 530
Tt Top Tubes mm 590 610 630
Cs Chain Stays mm 458 458 458
HTA head tube angle [°] 69.5 69.5 69.5
STA seat tube angle [°] 73.5 73.5 73.5
Bd Bottom Bracket Drops mm 65 65 65
Ht Head Tube Lengths mm 115 125 135
Fl Fork Lengths mm 511 511 511
R Reach mm 402 420 437
S Stacks mm 634 643 652
Wb Wheel Base mm 1123 1143 1164
Sh Stand Over Height mm 733 777 819

Technology

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

IMAGE

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

X-TAPER HEADTUBE
IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

SMOOTH WELDING
IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

INTERNAL CABLE ROUTING
IMAGE

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

SMART ENTRY
IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a Merida kickstand (or any commercial kickstand).

K-MOUNT
IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

IMAGE

CASTING MOTOR BRACKET

Sophisticated shape only possible due to casting technology, creating an integrated appearance as well as an extremely strong connection between the E-bike motor and frame for improved performance and reliability.