eSPRESSO L 300 SE EQ 418Wh

 

Fully equipped leisure eBike with mudguards, rack, kickstand, lock and lights. Powered by Shimano Steps 5000 40Nm motor with 418Wh battery. 9 gears.
Contact Local Shop

The perfect partner for urban riding, offering comfort and practicality. Standard-fit mudguards, lights, lock, rack and kickstand mean you’re ready to go from the moment you leave the shop.

The range includes options for men and women plus a low step-through city version for added ease.

Fast rolling 700c wheels are perfect for use in town, on gravel tracks or cycle paths. Wide 50 mm tyres add extra grip and comfort and their reflective sidewalls strips enhance rider safety in low light.

Choose between frames with internally mounted batteries or a more economical, semi-integrated design such as this. All use a powerful Shimano STEPS drive unit with batteries mounted low to aid balance and emulate a natural riding feel. A tapered head tube delivers confidence inspiring handling.

All electric bikes have an approved rider and equipment weight of up to 150 kg, meaning there's plenty of capacity for you and your luggage.

Strong but controllable hydraulic disc brakes help you stop with ease.

  • Shimano Steps 5000 40Nm motor
  • 418Wh battery
  • Shimano 9 speed
  • Hydraulic disc brakes
  • Mudguards, kickstand, rack, lock and lights
  • Reflective strip on tyres
  • material: aluminium
  • 700C wheelsize
  • 142x12mm axle standard
  • MUK 37 Hanger
  • eSPRESSO L XS(43L)-S(47L)-M(51L)-L(55L)
  • Coil
  • 63mm suspension travel
  • 700x48C max wheelsize
motor unit Plastic cover for battery
display Shimano SC-E5000A
speed sensor Shimano SM-DUE10
  • 20mm inner width
  • material: aluminium
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 142x12mm width rear hub
  • 36 spoke holes
  • Centerlock
  • 622x42"
  • reflective stripe
  • 622x42"
  • reflective stripe
  • including removeable lever, 6mm allen key
  • 38 teeth
  • Shimano FC-E5010
  • 11-36 teeth
  • 9 speed
chain KMC e9S
shifters Shimano Altus rapidfire
  • 180 mm
  • 160 mm
headset MERIDA 2346 Neck
  • material: aluminium
  • 31.8mm diameter
  • 17° stem angle
  • 80 mm-XS/S, 90 mm-M, 100 mm-L, 110 mm-XL
stem size 80 mm-XS/S, 90 mm-M, 100 mm-L, 110 mm-XL
  • material: aluminium
  • 660mm width
  • 15mm rise
grip MERIDA EXPERT TK
  • material: aluminium
  • 30.9mm diameter
  • 15mm setback
seat clamp MERIDA EXPERT
lights Herrmans H-Black MR4 E / Herrmans H-Cargo integrated in MERIDA MIK carrier
frame lock Abus 5650 LH-3 lock
kickstand Massload CL-KA98
mudguard Sunnywheel SW-FA 513
carrier MERIDA MIK Carrier with Spring clip & Herrmans rear light
pedal VP VPE-891
Bike Frame Geometry Image
Frame Size XS S M
Tyre Sizes 28" 28" 28"
St Seat Tubes mm 430 470 510
Tt Top Tubes mm 565 580 590
Cs Chain Stays mm 475 475 475
HTA head tube angle [°] 70.5 71 71
STA seat tube angle [°] 74 73.5 73.5
Bd Bottom Bracket Drops mm 70 70 70
Ht Head Tube Lengths mm 130 140 155
Fl Fork Lengths mm 477 477 477
R Reach mm 385 391 397
S Stacks mm 627 638 653
Wb Wheel Base mm 1101 1105 1116
Sh Stand Over Height mm 627 627 631
No. Item-No. Name Info Pieces Torque NM
1/2/3/4 CABLE GUIDE SMART ENTRY
5 A2300000213 SCREW M3x0.5 L13.5mm 2 2~4
6 A2151000025 COVER for battery; sizes S / M / L / XL 1
7 A2151000026 COVER for battery; sizes XS 1
8 A2300000468 SCREW M8x1.25 L18.5mm 3 11~12
9 A2300000469 SCREW M8x1.25 L23mm 3 11~12
10 A2258000099 CABLE PLUG for rear brake and speed sensor 1
11 A2258000012 CABLE GUIDE for M5 fixation 1
12 A2298000004 SCREW M5x0.8 L15mm with washer 1 3~5
13 A2300000129 SCREW M3x0.5 L10mm 2 2~4
14 A2311000067 RD-HANGER DH-057 1
15 A2143000076 COVER for carrier mount 2
16 A2298000142 SCREW M6x1.0 L12mm 2 6~8

To reduce production and delivery times, we are sometimes forced to make last-minute specification changes. Please be aware that those changes might not be reflected on these product pages and images.

Technology

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

When creating high-end aluminium frames, we use our proven PROLITE 66 (6066) aluminium, as it is incredibly light and durable. In addition, it works exceptionally well with our hydroforming technology, allowing us to create complex shapes, featuring triple butted wall thicknesses, an almost carbon-like appearance and the best possible stiffness-to-weight ratio. While lesser alloys might be cheaper, it is the ideal choice for high-performance bicycle frames.

IMAGE

HFS - HYDRO FORMING SYSTEM

To get the most out of an aluminium tube in terms of shape or varying wall thickness, we apply various forms of manipulation. The most complex but also the most effective is hydroforming, where an aluminium tube is inserted into a negative mould, and a hot emulsion of water and oil is forced through at pressure. The end result is a perfectly shaped aluminium tube that enables us to create beautifully crafted and lightweight aluminium frames.

IMAGE

X-TAPER HEADTUBE

Steering precision is vital to safe and confident handling, and the X-TAPER HEADTUBE allows us to significantly boost this precision. A larger headset diameter at the bottom paired with a smaller one at the top helps to deal with the strains modern riding and equipment can put on the headtube, all without adding unnecessary weight. It allows tapered forks to be fitted with ease and delivers precise and confidence-inspiring steering.

IMAGE

SMOOTH WELDING

This is a process we use to give a nice flat finish to our welds instead of the scaled, 'stack of coins' effect TIG welded joints often have. The welder uses the welding torch to go over the joint twice, helping to smooth out the filler material. It takes a lot of skill to do this, but it delivers strong and smart-looking frames that have the appearance of a carbon fibre frame at first look.

IMAGE

INTERNAL CABLE ROUTING

On the majority of our frames, we run the gear and brake cables and hoses through the frame. The cables enter and exit the frame through smooth sockets, or we use one of our other systems like SMART ENTRY or WIRE PORT to be routed through. Running the cables inside the frame protects them from the elements, gives a clean and neat look and can offer aerodynamic advantages.

IMAGE

SMART ENTRY

Many of our frames offer internal cable routing, where the gear and brake cables are run through the frame for maximum protection and a clean look. Some internally run cables can rattle when riding over uneven surfaces, but our SMART ENTRY system prevents this from happening. Cables, housings and brake hoses are clamped under tension to prevent noisy cable movement. All inlets are completely interchangeable to deal with any kind of cable or wire.

IMAGE

DI2 READY

Shimano's Di2 electronic shifting system offers fast, smooth and reliable shifting. In particular, in the road world, it has proven itself as the primary choice when top performance is at the top of the agenda. With that in mind, we have a broad selection of performance road frames that are Di2 READY and can accommodate the electrical cable, battery and other little tweaks that the system requires.

IMAGE

F-MOUNT

Being able to turn your bike into an all-weather commuter that has mudguards and other fittings can be a real plus, in particular when riding on wet and perhaps muddy roads and tracks on a regular basis. To make fitting easy, some of our bikes are F-MOUNT equipped. These integrated fittings mounts make adding mudguards fast and simple. Please note that some bikes require model-specific mudguards.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a Merida kickstand (or any commercial kickstand).

IMAGE

C-MOUNT

Similar to our F-MOUNT, where various fixing points for mudguards are part of the frame offering, the C-MOUNT equipped bikes have the fixing points for a rear rack already integrated, making fitting fast, simple and reliable. The C-MOUNTS are an additional feature that improves the day-to-day versatility by adding loading capacity to your bike, ideal for commuting and shopping trips. Please note that some bikes require model-specific rear racks.

IMAGE

CASTED MOTOR BRACKET

The e-bike motor mount has a sophisticated shape that is only possible to create with casting technology. Casting this piece allows us to create a complex yet lightweight shape that gives an extremely strong connection between the motor and the frame for improved performance and reliability. It also gives the bike and motor a smooth and cleanly integrated appearance.