eSPRESSO CC 400 EQ

Low step-through fully equipped eBike. More rugged than an eSpresso City due to wider tyres and 650b wheels. Powered by a Shimano Steps 6100 60Nm motor with powerful 630Wh battery.
Contact Local Shop

The eSpresso CC is the rugged sibling of the regular eSpresso, with wider and grippier high-volume tyres on 650b wheels.

Whilst it's happy in the urban jungle thanks to standard-fit mudguards, lights, lock, rack and kickstand, it's also capable of taking trips along forest trails and gravel tracks for fun.

All eSpresso CC models are equipped with a refined, powerful Shimano STEPS pedal-assist motor. Smooth, comfortable progress is assured by suspension forks and powerful hydraulic disc brakes allowing effortless, controlled braking.

All electric bikes have an approved rider and equipment weight of up to 150 kg, meaning there's plenty of capacity for you and your luggage.

  • Shimano Steps 6100 60Nm motor
  • Internally mounted 630 Wh battery
  • Shimano 10-speed drivetrain
  • Suspension fork and seat post
  • Rugged 650b wheels Grippy high-volume tyres with reflective strip
  • Mudguards, kickstand, rack, lock and lights
  • material: aluminium
  • 27,5x2,25" max. wheelsize
  • 135x9mm axle standard
  • internal
frame size XS, S, M, L
  • Coil
  • 80mm suspension travel
  • 27,5x2,4" max wheelsize
motor unit PC-052, Alloy painting
display Shimano SC-E5000A
speed sensor Shimano SM-DUE11
  • 20mm inner width
  • material: aluminium
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 135x9mm width rear hub
  • 36 spoke holes
  • Centerlock
  • 27.5x2.25"
  • wire
  • reflecting line
  • 27.5x2.25"
  • wire
  • reflecting line
  • 38 teeth
  • Shimano FC-E8000
  • 11-46 teeth
  • 10 speed
chain KMC e10S EPT
shifters Shimano Deore M4100
headset MERIDA-8152
  • material: aluminium
  • 31.8mm diameter
  • adjustable
  • 90 mm- XS/S/M, 110 mm- L/XL
stem size 90 mm- XS/S/M, 110 mm- L/XL
  • material: aluminium
  • 660mm width
  • 15mm rise
grip MERIDA EXPERT TK
  • 30.9mm diameter
  • 15mm setback
  • 40mm seatpost suspension travel
seat clamp MERIDA EXPERT
lights Herrmans H-Black MR4 E / Spanninga Commuter Glow XE integrated in MERIDA MIK HD carrier
frame lock Abus 4650 XL
carrier MERIDA MIK HD Carrier with Spring clip & Spanninga rear light
mudguard Sunnywheel SW-FA-311-65A(MSB)
kickstand Atranvelo 1219-PC-7
pedal VP VPE-891
Bike Frame Geometry Image
Frame Size XS S M L
Tyre Sizes 27.5" 27.5" 27.5" 27.5"
St Seat Tubes mm 380 430 480 530
Tt Top Tubes mm 580 595 615 635
Cs Chain Stays mm 470 470 470 470
HTA head tube angle [°] 70 70 70 70
STA seat tube angle [°] 73.5 73.5 73.5 73.5
Bd Bottom Bracket Drops mm 65 65 65 65
Ht Head Tube Lengths mm 170 175 180 190
Fl Fork Lengths mm 476 476 476 476
R Reach mm 385 399 417 435
S Stacks mm 656 661 666 675
Wb Wheel Base mm 1113 1129 1149 1170
Sh Stand Over Height mm 403 403 402 402

Technology

IMAGE

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

X-TAPER HEADTUBE
IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

SMOOTH WELDING
IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

INTERNAL CABLE ROUTING
IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

IMAGE

RACELITE 61 ALUMINIUM

We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a Merida kickstand (or any commercial kickstand).

K-MOUNT
IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

IMAGE

CASTING MOTOR BRACKET

Sophisticated shape only possible due to casting technology, creating an integrated appearance as well as an extremely strong connection between the E-bike motor and frame for improved performance and reliability.

IMAGE

ENERGY CRADLE

Unique cradle like shaping of the downtube to accommodate the battery, without adding any cut-outs and through that losing the all-important frame stiffness of our low step through frames. Paired with an aluminium battery cover, the frames give the impression of an integrated battery, without sacrificing stability and battery accessibility.

IMAGE

WIRE PORT

All control cables like gear, brake and dropper post cable enter the frame through a specifically shaped headset cap, cleaning up the cockpit area while also keeping them out of harm's way. Only the internally routed cable for the rear shock lockout enters the frame directly into the top tube for extra smooth lockout action.

WIRE PORT