eSPRESSO CC 400 EQ

eSPRESSO CC 400 EQ

 

Low step-through fully equipped eBike. More rugged than an eSpresso City due to wider tyres and 650b wheels. Powered by a Shimano Steps 6100 60Nm motor with powerful 630Wh battery.
Contact Local Shop

The eSpresso CC is the rugged sibling of the regular eSpresso, with wider and grippier high-volume tyres on 650b wheels.

Whilst it's happy in the urban jungle thanks to standard-fit mudguards, lights, lock, rack and kickstand, it's also capable of taking trips along forest trails and gravel tracks for fun.

All eSpresso CC models are equipped with a refined, powerful Shimano STEPS pedal-assist motor. Smooth, comfortable progress is assured by suspension forks and powerful hydraulic disc brakes allowing effortless, controlled braking.

All electric bikes have an approved rider and equipment weight of up to 150 kg, meaning there's plenty of capacity for you and your luggage.

  • Shimano Steps 6100 60Nm motor
  • Internally mounted 630 Wh battery
  • Shimano 10-speed drivetrain
  • Suspension fork and seat post
  • Rugged 650b wheels Grippy high-volume tyres with reflective strip
  • Mudguards, kickstand, rack, lock and lights
model year 2022
  • material: aluminium
  • 27,5x2,25" max. wheelsize
  • 135x9mm axle standard
  • MUK 5 Hanger
frame size XS, S, M, L
  • Coil
  • 80mm suspension travel
  • 27,5x2,4" max wheelsize
motor unit PC-052, Alloy painting
display Shimano SC-E5000A
speed sensor Shimano SM-DUE11
  • 20mm inner width
  • material: aluminium
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 135x9mm width rear hub
  • 36 spoke holes
  • Centerlock
  • 27.5x2.25"
  • wire
  • reflecting line
  • 27.5x2.25"
  • wire
  • reflecting line
  • 11-46 teeth
  • 10 speed
chain KMC e10S EPT
shifters Shimano Deore M4100
headset MERIDA 8152
  • material: aluminium
  • 31.8mm diameter
  • adjustable
  • 90 mm- XS/S/M, 110 mm- L/XL
stem size 90 mm-XS/S/M, 110 mm-L/XL
  • material: aluminium
  • 660mm width
  • 15mm rise
grip MERIDA EXPERT TK
  • 30.9mm diameter
  • 15mm setback
  • 40mm seatpost suspension travel
seat clamp MERIDA EXPERT
  • STVZO
  • STVZO
  • integrated in MERIDA MIK HD carrier
frame lock Abus 4650 XL
kickstand Atranvelo 1219-PC-7
mudguard Sunnywheel SW-FA-311-65A(MSB)
  • Spring clip
  • Spanninga rear light
pedal VP VPE-891
Bike Frame Geometry Image
Frame Size XS S M L
Tyre Sizes 27.5" 27.5" 27.5" 27.5"
St Seat Tubes mm 380 430 480 530
Tt Top Tubes mm 580 595 615 635
Cs Chain Stays mm 470 470 470 470
HTA head tube angle [°] 70 70 70 70
STA seat tube angle [°] 73.5 73.5 73.5 73.5
Bd Bottom Bracket Drops mm 65 65 65 65
Ht Head Tube Lengths mm 170 175 180 190
Fl Fork Lengths mm 476 476 476 476
R Reach mm 385 399 417 435
S Stacks mm 656 661 666 675
Wb Wheel Base mm 1113 1129 1149 1170
Sh Stand Over Height mm 403 403 402 402
No. Item-No. Name Info Pieces Torque NM
1 A2300000004 SCREW M3x0.5 L6mm 2 2~4
2 A2311000072 RD-HANGER DH-013F 1
3 A2258000079 CABLE PLUG for rear brake 1
4 A2300000468 SCREW M8x1.25 L18.5mm 3 11~12
5 A2300000469 SCREW M8x1.25 L23mm 3 11~12
6.1 A2143000126 BUTTON ON-OFF; for SHIMANO batteries 1
6.2 A2143000097 BLIND PLUG for SIMPLO batteries 1
7 A2164000088 MOUNT for lower battery mount 1
8 A2298000143 SCREW M6x1.0 L10mm 4 6~8
9 A2030000016 MOUNT upper; for battery cover 1
10 A2030000017 MOUNT lower; for battery cover 1
11 A2160000012 O-RING OD6mm ID4mm 2
12 A2221000048 BUSHING for battery cover 2
13 A2300000530 BOLT M5x0.8 L39.5mm 1 4~6
14 A2300000231 SCREW M3x0.5 L8mm 3 2~4
15 A2143000153 BLIND PLUG for drive unit screw holes 4
16 A2161000138 COVER for battery; frame size XS 1
16 A2161000139 COVER for battery; frame size S 1
16 A2161000140 COVER for battery; frame size M 1
16 A2161000141 COVER for battery; frame size L 1
16 A2161000142 COVER for battery; frame size XL 1
17 A2136000071 MOUNT for battery cover 1
18 A2029000001 BUMPER for battery cover 2
19 A2134000061 BUTTON for cover lock 1 3.75~4.25
20 A2136000017 MOUNT for bottle cage 1
21 A2292000028 WASHER OD9mm ID5.2mm H3mm 2
22 A2298000154 SCREW M5x0.8 L12mm 2 3~5
23 A2298000158 SCREW M5x0.8 L25mm 1 3~5
24 A2164000065 MOUNT for SIMPLO ON-OFF 1
25 A2300000568 SCREW M3x0.5 L6mm 2 2~4
26 A2300000204 NUT for fender; M6 1
27 A2300000288 SCREW M6x1.0 L18mm 1 10~12
28 A2363000255 PROTECTOR for step through area 1
29 A2191000138 HEAD SET MERDIA/ACROS-ICR TREKKING 1
30 A2161000143 COVER for drive unit; left side 1
31 A2161000144 COVER for drive unit; right side 1
32 A2143000122 CABLE PLUG for front light 1
SMALL PARTS E6100 see pdf file

To reduce production and delivery times, we are sometimes forced to make last-minute specification changes. Please be aware that those changes might not be reflected on these product pages and images.

 

Technology

IMAGE
Back to overview

HFS - HYDRO FORMING SYSTEM

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

Watch Video
IMAGE
Back to overview

X-TAPER HEADTUBE

Steering precision is vital to safe and confident handling, and the X-TAPER HEADTUBE allows us to significantly boost this precision. A larger headset diameter at the bottom paired with a smaller one at the top helps to deal with the strains modern riding and equipment can put on the headtube, all without adding unnecessary weight. It allows tapered forks to be fitted with ease and delivers precise and confidence-inspiring steering.

Watch Video
IMAGE
Back to overview

SMOOTH WELDING

This is a process we use to give a nice flat finish to our welds instead of the scaled, 'stack of coins' effect TIG welded joints often have. The welder uses the welding torch to go over the joint twice, helping to smooth out the filler material. It takes a lot of skill to do this, but it delivers strong and smart-looking frames that have the appearance of a carbon fibre frame at first look.

Watch Video
IMAGE
Back to overview

INTERNAL CABLE ROUTING

On the majority of our frames, we run the gear and brake cables and hoses through the frame. The cables enter and exit the frame through smooth sockets, or we use one of our other systems like SMART ENTRY or WIRE PORT to be routed through. Running the cables inside the frame protects them from the elements, gives a clean and neat look and can offer aerodynamic advantages.

Watch Video
IMAGE
Back to overview

DI2 READY

Shimano's Di2 electronic shifting system offers fast, smooth and reliable shifting. In particular, in the road world, it has proven itself as the primary choice when top performance is at the top of the agenda. With that in mind, we have a broad selection of performance road frames that are Di2 READY and can accommodate the electrical cable, battery and other little tweaks that the system requires.

Watch Video
IMAGE
Back to overview

RACELITE 61 ALUMINIUM

We use a minimum of 6061 grade aluminium on all our bikes. It’s particularly well suited to being shaped with our hydroforming and technoforming processes, which allow us to vary the wall thickness to create double-butted tubing and complex frame shapes. It’s also an alloy that welds easily, and once it has been carefully heat treated to maximise strength, it means we can create strong and lightweight bicycle frames for you to enjoy.

Watch Video
IMAGE
Back to overview

F-MOUNT

Being able to turn your bike into an all-weather commuter that has mudguards and other fittings can be a real plus, in particular when riding on wet and perhaps muddy roads and tracks on a regular basis. To make fitting easy, some of our bikes are F-MOUNT equipped. These integrated fittings mounts make adding mudguards fast and simple. Please note that some bikes require model-specific mudguards.

Watch Video
IMAGE
Back to overview

K-MOUNT

Integrated mount on the chainstay to fit a Merida kickstand (or any commercial kickstand).

Watch Video
IMAGE
Back to overview

C-MOUNT

Similar to our F-MOUNT, where various fixing points for mudguards are part of the frame offering, the C-MOUNT equipped bikes have the fixing points for a rear rack already integrated, making fitting fast, simple and reliable. The C-MOUNTS are an additional feature that improves the day-to-day versatility by adding loading capacity to your bike, ideal for commuting and shopping trips. Please note that some bikes require model-specific rear racks.

Watch Video
IMAGE
Back to overview

CASTED MOTOR BRACKET

The e-bike motor mount has a sophisticated shape that is only possible to create with casting technology. Casting this piece allows us to create a complex yet lightweight shape that gives an extremely strong connection between the motor and the frame for improved performance and reliability. It also gives the bike and motor a smooth and cleanly integrated appearance.

Watch Video
IMAGE
Back to overview

ENERGY CRADLE

Our ENERGY CRADLE is a unique cradle-like shaping of the downtube that allows the battery to sit into the downtube in a specifically shaped recess, without adding any cut-outs to the downtube. Paired with an aluminium battery cover, the frame gives the impression of an integrated battery but offers a much stiffer structure for improved handling on our low-step-through frames, without sacrificing battery accessibility.

Watch Video
IMAGE
Back to overview

WIRE PORT

All control cables like gear, brake and dropper post cable enter the frame through a specifically shaped headset cap, cleaning up the cockpit area while also keeping them out of harm's way. Only the internally routed cable for the rear shock lockout enters the frame directly into the top tube for extra smooth lockout action.

Watch Video