eSPRESSO CC 400 SE EQ

 

Low step-through rugged urban eBike fully equipped with mudguards, rack, kickstand, lock and lights. 9 speed drivetrain and uses a Shimano Steps 6100 60Nm motor with 504Wh battery.
Contact Local Shop

The eSpresso CC is the rugged sibling of the regular eSpresso, with wider and grippier high-volume tyres on 650b wheels.

Whilst it's happy in the urban jungle thanks to standard-fit mudguards, lights, lock, rack and kickstand, it's also capable of taking trips along forest trails and gravel tracks for fun.

All eSpresso CC models are equipped with a refined, powerful Shimano STEPS pedal-assist motor. Smooth, comfortable progress is assured by suspension forks and powerful hydraulic disc brakes allowing effortless, controlled braking.

All electric bikes have an approved rider and equipment weight of up to 150 kg, meaning there's plenty of capacity for you and your luggage.

  • Shimano Steps 6100 60Nm motor
  • 504 Wh battery
  • Shimano 9 speed drivetrain
  • Suspension fork and seat post
  • Rugged 650b wheels Grippy high-volume tyres with reflective strip
  • Mudguards, kickstand, rack, lock and lights
  • material: aluminium
  • 27,5x2,25 max. wheelsize
  • 135x9mm axle standard
  • MUK 5 Hanger
frame size S, M, L
  • Coil
  • 80mm suspension travel
  • 27,5x2,4" max wheelsize
motor unit Plastic cover for battery
display Shimano SC-E5000A
speed sensor Shimano SM-DUE10
  • 20mm inner width
  • material: aluminium
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 135x9mm width rear hub
  • 36 spoke holes
  • Centerlock
  • 27.5x2.25"
  • wire
  • reflecting line
  • 27.5x2.25"
  • wire
  • reflecting line
  • 11-36 teeth
  • 9 speed
chain KMC e9S
shifters Shimano Alivio
headset MERIDA 2346
  • material: aluminium
  • 31.8mm diameter
  • adjustable
  • 90 mm- XS/S/M, 110 mm-L/XL
stem size 90 mm-XS/S/M, 110 mm-L/XL
  • material: aluminium
  • 660mm width
  • 15mm rise
grip MERIDA EXPERT TK
  • 30.9mm diameter
  • 15mm setback
  • 40mm seatpost suspension travel
seat clamp MERIDA EXPERT
  • STVZO
  • STVZO
  • integrated in MERIDA MIK HD carrier
frame lock Abus 5650 LH-3 lock
kickstand Massload CL-KA100K-Mount
mudguard Sunnywheel SW-FA-311-65A(MSB)
  • Spring clip
  • Spanninga rear light
pedal VP VPE-891
Bike Frame Geometry Image
Frame Size S M L
Tyre Sizes 27.5" 27.5" 27.5"
St Seat Tubes mm 430 480 530
Tt Top Tubes mm 588 605 623
Cs Chain Stays mm 445 445 445
HTA head tube angle [°] 68.5 68.5 68.5
STA seat tube angle [°] 73 73 73
Bd Bottom Bracket Drops mm 50 50 50
Ht Head Tube Lengths mm 170 190 210
Fl Fork Lengths mm 484 484 484
R Reach mm 392 403 415
S Stacks mm 642 661 680
Wb Wheel Base mm 1114 1133 1153
Sh Stand Over Height mm 472 465 461
No. Item-No. Name Info Pieces Torque NM
1 A2300000228 SCREW M4x0.7 L14mm 2 1.5~2
2 A2258000127 CABLE GUIDE for right side 1
3 A2258000128 CABLE GUIDE for left side 1
4 A2258000099 CABLE PLUG for rear brake and speed sensor 1
5 A2311000072 RD-HANGER DH-013F 1
6 A2300000004 SCREW M3x0.5 L6mm 2 2~4
7 A2300000468 SCREW M8x1.25 L18.5mm 3 11~12
8 A2300000469 SCREW M8x1.25 L23mm 3 11~12
9 A2300000204 NUT for fender; M6 1
10 A2300000288 SCREW M6x1.0 L18mm 1 10~12

To reduce production and delivery times, we are sometimes forced to make last-minute specification changes. Please be aware that those changes might not be reflected on these product pages and images.

Technology

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

When creating high-end aluminium frames, we use our proven PROLITE 66 (6066) aluminium, as it is incredibly light and durable. In addition, it works exceptionally well with our hydroforming technology, allowing us to create complex shapes, featuring triple butted wall thicknesses, an almost carbon-like appearance and the best possible stiffness-to-weight ratio. While lesser alloys might be cheaper, it is the ideal choice for high-performance bicycle frames.

IMAGE

HFS - HYDRO FORMING SYSTEM

To get the most out of an aluminium tube in terms of shape or varying wall thickness, we apply various forms of manipulation. The most complex but also the most effective is hydroforming, where an aluminium tube is inserted into a negative mould, and a hot emulsion of water and oil is forced through at pressure. The end result is a perfectly shaped aluminium tube that enables us to create beautifully crafted and lightweight aluminium frames.

IMAGE

X-TAPER HEADTUBE

Steering precision is vital to safe and confident handling, and the X-TAPER HEADTUBE allows us to significantly boost this precision. A larger headset diameter at the bottom paired with a smaller one at the top helps to deal with the strains modern riding and equipment can put on the headtube, all without adding unnecessary weight. It allows tapered forks to be fitted with ease and delivers precise and confidence-inspiring steering.

IMAGE

SMOOTH WELDING

This is a process we use to give a nice flat finish to our welds instead of the scaled, 'stack of coins' effect TIG welded joints often have. The welder uses the welding torch to go over the joint twice, helping to smooth out the filler material. It takes a lot of skill to do this, but it delivers strong and smart-looking frames that have the appearance of a carbon fibre frame at first look.

IMAGE

INTERNAL CABLE ROUTING

On the majority of our frames, we run the gear and brake cables and hoses through the frame. The cables enter and exit the frame through smooth sockets, or we use one of our other systems like SMART ENTRY or WIRE PORT to be routed through. Running the cables inside the frame protects them from the elements, gives a clean and neat look and can offer aerodynamic advantages.

IMAGE

DI2 READY

Shimano's Di2 electronic shifting system offers fast, smooth and reliable shifting. In particular, in the road world, it has proven itself as the primary choice when top performance is at the top of the agenda. With that in mind, we have a broad selection of performance road frames that are Di2 READY and can accommodate the electrical cable, battery and other little tweaks that the system requires.

IMAGE

F-MOUNT

Being able to turn your bike into an all-weather commuter that has mudguards and other fittings can be a real plus, in particular when riding on wet and perhaps muddy roads and tracks on a regular basis. To make fitting easy, some of our bikes are F-MOUNT equipped. These integrated fittings mounts make adding mudguards fast and simple. Please note that some bikes require model-specific mudguards.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a Merida kickstand (or any commercial kickstand).

IMAGE

C-MOUNT

Similar to our F-MOUNT, where various fixing points for mudguards are part of the frame offering, the C-MOUNT equipped bikes have the fixing points for a rear rack already integrated, making fitting fast, simple and reliable. The C-MOUNTS are an additional feature that improves the day-to-day versatility by adding loading capacity to your bike, ideal for commuting and shopping trips. Please note that some bikes require model-specific rear racks.