ONE-TWENTY 600

Killer value package - RockShox Deluxe Select Air shock with Marzocchi Z2 130mm forks. Shimano XT 1 x 12 rear mech and Race Face crank, Shimano Boost standard center lock hubs and Shimano hydraulic disc brakes.
Contact Local Shop

The One-Twenty is our most versatile full suspension bike, as with all the range, this bike is over forked running 130mm forks with plush 120mm rear travel.

Our designers considered both riders and mechanics, delivering a playful modern trail bike with a slack head angle, low standover height and short chain stays that’s easy to maintain.

The rear shock is held in place with trunnion mounts which due to the wider mounting increases frame stiffness and reduces shock wear. The designers can run shorter shocks and longer stroke allowing more scope for suspension tuning.

All key bolts can be adjusted from one side of the bike with a Torx 30 key without the need for removing the chain set to access the main pivot bolt.

While very much a trail bike at heart, the modern yet balanced trail bike geometry, paired with fantastic frame stiffness, created a mid-travel bike that is super capable on rough trails but also carries speed perfectly on less technically demanding tracks.

  • Float link suspension
  • 130mm Marzocchi Z2 Air fork and RockShox Deluxe Select+ shock
  • 1 x 12 Shimano XT rear mech
  • Shimano Boost standard bolt through axles
  • Shimano hydraulic disc brakes
  • Dropper seatpost
  • 120mm suspension travel
  • material: aluminium
  • 29 wheelsize
  • 148x12mm axle standard
  • BB92 bottom bracket standard
frame size M, L
  • Air
  • 130mm suspension travel
  • Tapered
  • 44mm fork offset
  • 29mm inner width
  • material: aluminium
  • Tubeless ready (tubeless tape and valves not included)
  • 110x15mm width front hub
  • 32 spoke holes
  • Centerlock
  • 148x12mm width rear hub
  • 32 spoke holes
  • Centerlock
  • 29x2.35"
  • fold
  • TR EXO Dual
  • 29x2.35"
  • fold
  • TR EXO Dual
  • including removeable lever, 6/4mm allen key
  • 32 teeth
  • 170 mm-S, 175 mm-M up
crank size 170 mm-S, 175 mm-M up
bottom bracket Race Face BB BB92– Ø24mm
  • 10-51 teeth
  • 12 speed
chain KMC X12
shifters Shimano SL -MT500-IL / Shimano Deore M6100
rear derailleur Shimano XT M8100 Shadow+
headset FSA NO.47/50
  • material: aluminium
  • 35mm diameter
  • 0° stem angle
  • 50 mm all sizes
stem size 50 mm all sizes
  • material: aluminium
  • 760mm width
  • 20mm rise
grip MERIDA COMP EC
  • 30.9mm diameter
  • 0mm setback
  • S: 100mm travel seatpost - M: 125mm travel seatpost - L/XL: 150mm travel seatpost
seat clamp MERIDA EXPERT
Bike Frame Geometry Image
Frame Size M L
Tyre Sizes 29" 29"
St Seat Tubes mm 440 480
Tt Top Tubes mm 592 614
Cs Chain Stays mm 435 435
HTA head tube angle [°] 67.3 67.3
STA seat tube angle [°] 75.5 75.5
Bd Bottom Bracket Drops mm 40 40
Ht Head Tube Lengths mm 95 105
Fl Fork Lengths mm 541 541
R Reach mm 435 455
S Stacks mm 607 616
Wb Wheel Base mm 1161 1185
Sh Stand Over Height mm 730 759

Technology

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

X-TAPER HEADTUBE
IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

SMOOTH WELDING
IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

INTERNAL CABLE ROUTING
IMAGE

DOWN TUBE EXIT

Ensures that internally routed cables and wires can’t move freely and remain easily accessible for servicing.

IMAGE

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

SMART ENTRY
IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

IMAGE

FLOAT LINK REAR SUSPENSION

The lower shock mount moves with the system to deliver sensitive response characteristics. Our engineers can precisely influence the transmission ratio, and progression meaning a ‘Float Link’ rear suspension system appears to offer more travel than the model name suggests.

IMAGE

NON-SLIP TIGHTENING

Selected bolts can be tightened via a TORX 30 key from just one side, without running the risk that the opposite side slips or turns, allowing faster and more straightforward tightening of important hardware components.