ONE-TWENTY 7. 600

ONE-TWENTY 7. 600

Colour Variants

ONE-TWENTY 7. 600
  • 120mm suspension travel
  • material: aluminium
  • 27.5 wheelsize
  • 148x12mm axle standard
  • BB92 bottom bracket standard
frame size S, M, L
  • Air 130mm suspension travel
  • Tapered
  • 37mm fork offset
  • 29mm inner width
  • material: aluminium
  • Tubeless ready (tubeless tape and valves not included)
hubs Shimano MT400-B
  • 27.5x2.35"
  • fold
  • TR EXO Dual
  • 27.5x2.35"
  • fold
  • TR EXO Dual
Hubs MERIDA COMP TR
  • 32 teeth
  • 170 mm-S, 175 mm-M up
crank size 170 mm-S, 175 mm-M up
bottom bracket Sram BB DUB PF MTB 92
  • 11-50 teeth
  • 12 speed
chain Sram NX Eagle
shifters Sram NX Eagle
rear derailleur Sram NX Eagle
brakes Shimano MT-500
rotors Shimano RT10
headset FSA NO.47/50P Neck
  • material: aluminium
  • 35mm diameter
  • 0° stem angle
  • 50 mm all sizes
stem size 50 mm all sizes
  • material: aluminium
  • 760mm width
  • 20mm rise
grip MERIDA COMP EC
  • 30.9mm diameter
  • 0mm setback
  • S: 100mm travel seatpost - M/L/XL 125mm travel seatpost
saddle MERIDA COMP CC
seat clamp MERIDA EXPERT

weighed at frame size M and 27.5" wheels without pedals

Bike Frame Geometry Image
Frame Size S M M L
Tyre Sizes 29" 27.5" 29" 29"
Frame Size cm 40 44 44 48
St Seat Tubes mm 400 440 440 480
Tt Top Tubes mm 572 593 592 614
Cs Chain Stays mm 435 430 435 435
HTA head tube angle [°] 67.3 66.8 67.3 67.3
STA seat tube angle [°] 75.5 75 75.5 75.5
Bd Bottom Bracket Drops mm 40 21 40 40
Ht Head Tube Lengths mm 95 115 95 105
Fl Fork Lengths mm 541 522 541 541
R Reach mm 415 435 435 455
S Stacks mm 607 590 607 616
Wb Wheel Base mm 1141 1154 1161 1185
Sh Stand Over Height mm 707 726 730 759

CATEGORY HIGHLIGHTS

Lightweight 6066 series aluminium triple butted and hydroformed frameset with ‘Smooth welding’ and internal cable routing. Tapered head tube for precise steering, Boost standard and rear through axle for rear end stiffness. Floating shock provides 120 mm of travel.

Selected bolts can be tightened via a TORX 30 key from just one side, without running the risk that the opposite side slips or turns, allowing faster and more straightforward tightening of important hardware components.

A trunnion mount shock gives our frame designers more flexibility by using a shorter shock with increased stroke. Combined with the ball bearing bushing of the upper mount, shock sensitivity is increased, and the suspension performance can be perfectly tuned.

A dropper post is allowing the rider to get the saddle out of the way when the gradient gets steeper, giving him/her more space to manoeuver and control over their bike. The fitted dropper posts featuring internal cable routing and remote levers, creating a cleaner look and allowing easier 'on the go' saddle height adjustment.

A long reach, paired with a slack 65.5° head angle and a steep seat angle make our BIG.TRAIL a solid descender even when the trail is littered with roots and rocks, while maintaining impressive climbing abilities, due to the central seating position over the bottom bracket. The extra short seat tube and low stand over hight help to create lots of space to manoeuvre the bike when the trail gets demanding but also allow for long travel dropper posts.

Technology

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

DOWN TUBE EXIT

Ensures that internally routed cables and wires can’t move freely and remain easily accessible for servicing.

IMAGE

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

IMAGE

FLOAT LINK REAR SUSPENSION

The lower shock mount moves with the system to deliver sensitive response characteristics. Our engineers can precisely influence the transmission ratio, and progression meaning a ‘Float Link’ rear suspension system appears to offer more travel than the model name suggests.

IMAGE

NON-SLIP TIGHTENING

Selected bolts can be tightened via a TORX 30 key from just one side, without running the risk that the opposite side slips or turns, allowing faster and more straightforward tightening of important hardware components.