BIG.NINE LIMITED-AL

  • 32 teeth
  • 170 mm-S, 175 mm-M up
  • 20mm inner width
  • material: aluminium
frame size M, L, XL
  • material: aluminium
  • 29 wheelsize
  • 148x12mm axle standard
  • BB92 bottom bracket standard
  • Air
  • 100mm suspension travel
  • Tapered
  • Remote lockout
  • 51mm fork offset
remote lever remote included
Hubs MERIDA COMP TR
tyres Maxxis Ikon
shifters Sram SX Eagle
rear derailleur Sram SX Eagle
crank size 170 mm-S, 175 mm-M up
  • 11-50 teeth
  • 12 speed
brakes Shimano MT-200
rotors Shimano RT10
bottom bracket Sram BB DUB PF MTB 92
chain Sram SX Eagle
headset MERIDA M2331
  • material: aluminium
  • 720mm width
  • flat
  • material: aluminium
  • 31.8mm diameter
  • -6° stem angle
  • S-70 mm, M-80 mm, L-90 mm, XL-100 mm, XXL-110 mm
stem size S-70 mm, M-80 mm, L-90 mm, XL-100 mm, XXL-110 mm
saddle MERIDA COMP CC
  • material: aluminium
  • 30.9mm diameter
  • 0mm setback
seat clamp MERIDA EXPERT
grip MERIDA COMP EC

weighed at frame size M and 29" wheels without pedals

Bike Frame Geometry Image
Frame Size M L XL
Tyre Sizes 29" 29" 29"
Frame Size cm 44 48 53
St Seat Tubes mm 444 483 532
Tt Top Tubes mm 605 625 645
Cs Chain Stays mm 433 433 433
HTA head tube angle [°] 70 70 70
STA seat tube angle [°] 73.5 73.5 73.5
Bd Bottom Bracket Drops mm 65 65 65
Ht Head Tube Lengths mm 100 110 125
Fl Fork Lengths mm 506 506 506
R Reach mm 422 439 455
S Stacks mm 619 628 642
Wb Wheel Base mm 1100 1121 1142
Sh Stand Over Height mm 740 771 816
Height in cm 167 - 183 177 - 190 187 - 196

Technologies

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

IMAGE

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

IMAGE

FLEX-STAY

The seat and chainstay profile and carbon lay-up schedule are adapted to work like a flat leaf spring, absorbing surface bumps and reducing vibrations.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

DOWN TUBE EXIT

Ensures that internally routed cables and wires can’t move freely and remain easily accessible for servicing.

IMAGE

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.