• 36-22 teeth
  • 170 mm-S, 175 mm-M up
  • 20mm inner width
  • material: aluminium
frame size S, M, L, XL, XXL
  • material: aluminum
  • 29 wheelsize
  • 135x9mm axle standard
  • BSA bottom bracket standard
  • Coil
  • 100mm suspension travel
  • Lockout
  • 46mm fork offset
tyres Maxxis Ikon
shifters Shimano Altus
front derailleur Shimano M2020-TS
rear derailleur Shimano Alivio Shadow
crank size 170 mm-S, 175 mm-M up
  • 11-36 teeth
  • 9 speed
brakes Shimano MT-200
rotors Shimano RT10
bottom bracket Shimano UN100 BSA
chain KMC M99
headset MERIDA M2345
  • material: aluminium
  • 720mm width
  • 10mm rise
  • material: aluminium
  • 31.8mm diameter
  • 6° stem angle
  • S-70 mm, M-80 mm, L-90 mm, XL-100 mm, XXL-110 mm
stem size S-70 mm, M-80 mm, L-90 mm, XL-100 mm, XXL-110 mm
saddle MERIDA COMP CC
  • material: aluminium
  • 30.9mm diameter
  • 0mm setback
seat clamp MERIDA COMP QR
grip MERIDA COMP EC
pedal VP VPE-891

weighed at frame size M and 29" wheels without pedals

Bike Frame Geometry Image
Frame Size S M L XL XXL
Tyre Sizes 29" 29" 29" 29" 29"
Frame Size cm 37 43 47 51 56
St Seat Tubes mm 370 430 470 510 560
Tt Top Tubes mm 570 590 610 630 650
Cs Chain Stays mm 440 440 440 440 440
HTA head tube angle [°] 70 70 70 70 70
STA seat tube angle [°] 73 73 73 73 73
Bd Bottom Bracket Drops mm 60 60 60 60 60
Ht Head Tube Lengths mm 100 115 130 145 160
Fl Fork Lengths mm 506 506 506 506 506
R Reach mm 382 398 414 429 445
S Stacks mm 614 628 642 656 670
Wb Wheel Base mm 1069 1090 1110 1131 1152
Sh Stand Over Height mm 679 727 763 800 843
Height in cm < 173 167 - 183 177 - 190 187 - 196 > 192

Technologies

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

DOWN TUBE EXIT

Ensures that internally routed cables and wires can’t move freely and remain easily accessible for servicing.

IMAGE

RACELITE 61 ALUMINIUM

We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.

IMAGE

TFS - TECHNO FORMING SYSTEM

Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core. 

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.