MATTS 6. 10-V

MATTS 6. 10-V

Colour Variants

MATTS 6. 10-V
  • material: aluminium
  • 26" wheelsize
  • 135x9mm axle standard
  • BSA bottom bracket standard
frame size XS, S, M
  • Coil
  • 100mm suspension travel
  • 17mm inner width
  • material: aluminium
  • 100x9mm width front hub
  • 32 spoke holes
  • 135x9 WHF
  • 32 spoke holes
  • 42-34-24 teeth
  • 170 mm-XS/S, 175 mm-M
crank size 170 mm-XS/S, 175 mm-M
bottom bracket FSA TH-7420ST-W, Cartridge Bearing
  • 14-28 teeth
  • 7 speed
chain KMC Z7
shifters Shimano ST-EF500
front derailleur Shimano FD-TY300
rear derailleur Shimano RD-M310
brake lever Shimano ST-EF500
brakes Promax MTV-117A
headset FSA NO.10P Neck15
  • material: aluminium
  • 25.4mm diameter
  • 15° stem angle
  • 80 mm-XS/S, 90 mm-M
stem size 80 mm-XS/S, 90 mm-M
  • material: steel
  • 620mm width
  • 30mm rise
  • material: aluminium
  • 27.2mm diameter
  • 15mm setback
saddle MERIDA Sport comfort
seat clamp MERIDA COMP QR
pedal VP VPE-891
weight 13.9 kg
Bike Frame Geometry Image
Frame Size XS S M
Tyre Sizes 26" 26" 26"
Frame Size cm 34 38 43
St Seat Tubes mm 343 381 432
Tt Top Tubes mm 540 550 560
Cs Chain Stays mm 425 425 425
HTA head tube angle [°] 69.5 69.5 70
STA seat tube angle [°] 73.5 73.5 73
Bd Bottom Bracket Drops mm 55 55 55
Ht Head Tube Lengths mm 115 125 135
Fl Fork Lengths mm 475 475 475
R Reach mm 364 371 372
S Stacks mm 594 604 615
Wb Wheel Base mm 1028 1038 1038
Sh Stand Over Height mm 589 621 674


6061 series double butted aluminium frame with a more relaxed geometry. Comes equipped with internal cable routing as well as F, C and K-mounts.

A more compact top tube, paired with a higher front end, provide the MATTS with a more upright riding position, delivery extra riding comfort for the rider as well as a better view of what lies ahead.

Our MATTS offer either 650B or 26" wheels, depending on model and frame size. The top models of the MATTS line-up feature fast rolling 650B wheels, while the middle range offers the smaller models with easy to accelerate 26" wheels. The MATTS 10-V entry model comes with 26" wheels throughout all frame sizes.

All models feature powerful and easy to modulate hydraulic disc brakes. Hydraulic disc brakes offer great stopping power in any weather, are more or less maintenance-free and are not affected by rough or kinked cables.

The MATTS frames have bosses and fixture points to attach a water bottle cage, rear fenders, a rear rack and a kickstand, making it super versatile if and when it gets used as a commuter or more urban-focused bike.

Aluminium welding is the strong point of our factories. 48 years of production knowledge and experience go into every frame we make. The MATTS is one of the most long-standing bike categories in our history and is proud to carry the name MERIDA.

We feature internal cable routing on all models. Cables are routed through the frame, entering and exiting through smooth sockets. Only a clever system for our internal guiding and fixing guarantees reliable and rattle free routing, whilst the cables are protected from moisture and dirt and gives the bike a cleaner look.




We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.



‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.



Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).



‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.