frame size XS, S, M, L
frame JULIET TFS
  • Coil
  • 100mm suspension travel
  • Lockout
remote lever no
tyres Maxxis Ikon
shifters Shimano Altus
front derailleur Shimano M3000
rear derailleur Shimano Alivio
  • 11-34 teeth
  • 9 speed
brake lever Shimano MT-200
brakes Shimano MT-200
rotors Shimano RT10
bottom bracket Shimano UN100 BSA
chain KMC M99
headset MERIDA M44PSE Neck
  • 660mm width
  • 25mm rise
  • 31.8mm diameter
  • 15° stem angle
saddle MERIDA Juliet Sport V
  • 27.2mm diameter
  • 12mm setback
seat clamp MERIDA Comp QR
grip MERIDA Comp EC
  • VPE-891

weighed at frame size S (w/o pedals)

Bike Frame Geometry Image
Frame Size XS S M L
Tyre Sizes 27.5" 27.5" 27.5" 27.5"
Frame Size cm 34 38 43 47
St Seat Tubes mm 343 381 432 470
Tt Top Tubes mm 550 560 575 585
Cs Chain Stays mm 430 430 430 430
HTA head tube angle [°] 69.5 69.5 70 70
STA seat tube angle [°] 74.5 74.5 74.5 74.5
Bd Bottom Bracket Drops mm 63 63 63 63
Ht Head Tube Lengths mm 95 100 105 115
Fl Fork Lengths mm 493 493 493 493
R Reach mm 384 392 405 413
S Stacks mm 600 605 612 621
Wb Wheel Base mm 1051 1062 1072 1083
Sh Stand Over Height mm 603 635 686 715
Height in cm < 163 157 - 173 167 - 183 > 177

Technologies

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

DOWN TUBE EXIT

Ensures that internally routed cables and wires can’t move freely and remain easily accessible for servicing.

IMAGE

CHAINSTAY POST MOUNT DISC

In-board brake mounts are positioned within the rear triangle to protect them. The caliper supported by the stronger chainstay is able to distribute braking forces better. Internal cable routing is also easier and neater via the chainstay.

IMAGE

REMOTE LOCKOUT

The suspension fork and/or rear shock can be locked out via a ‘remote control’ lever on the handlebar.

IMAGE

RACELITE 61 ALUMINIUM

We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.

IMAGE

TFS - TECHNO FORMING SYSTEM

Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core. 

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

JULIET COLLECTION

TUNED FOR FEMALE RIDERS

View the Range