eONE-SIXTY LIMITED-EDITION

  • 29mm inner width
frame size XS, S, M, L, XL
  • material: aluminium
Hubs MERIDA COMP TR
tyres Maxxis Assegai / Maxxis DHR II
shifters Shimano SLX 12
rear derailleur Shimano XT RDM8100 Shadow+
brakes Shimano MT-520 / Shimano MT-500
rotors Shimano RT30 / Shimano RTEM300
bottom bracket included
chain CN-M7100
headset Merida 1901
  • material: aluminium
stem size 40 mm all sizes
saddle MERIDA COMP CC
seat clamp Merida EXPERT clamp
grip MERIDA EXPERT EC
  • VPE-537
mudguard C093-02F + C093-02R
lights CG-119PG-BLACK(1) / CG-404RG-BLK
display Shimano SC-E7000
speed sensor SM-DUE11
Bike Frame Geometry Image
Frame Size XS S M L XL
Tyre Sizes 27.5" 27.5" 27.5" 27.5" 27.5"
Frame Size cm 41 42 44 47 50
St Seat Tubes mm 405 420 440 470 500
Tt Top Tubes mm 562.5 583.5 605 628.5 652
Cs Chain Stays mm 439.5 439.5 439.5 439.5 439.5
HTA head tube angle [°] 65.5 65.5 65.5 65.5 65.5
STA seat tube angle [°] 75.5 75.5 75.5 75.5 75.5
Bd Bottom Bracket Drops mm 17.5 17.5 17.5 17.5 17.5
Ht Head Tube Lengths mm 110 115 120 135 150
Fl Fork Lengths mm 571 571 571 571 571
R Reach mm 400 420 440 460 480
S Stacks mm 628.5 633 637.5 651.5 665
Wb Wheel Base mm 1168 1190 1212 1238.5 1264.5

CATEGORY HIGHLIGHTS

HFS-hydroformed Prolite 66 triple butted aluminium frame featuring internal battery technology and an aggressive enduro geometry with 160 mm rear wheel travel. Shimano STePS motor allows for short chain stays delivering agility. ‘Smart Entry’ cable routing for rattle free running. Casting motor bracket
creates an integrated appearance of the motor into the frame as well as provides an extremely strong connection between frame and motor.

A two-component battery cover, which offers perfect protection for the internal battery. The softer (outer) layer reduces noises, seals the downtube perfectly and absorbs hits from trail debris easily, while the harder (inner) layer ensures that the battery does not get damaged and gives it the structural shape. All critical parts like the rubber strap and o-rings for perfect fitting can be replaced.

First introduced in our 2015 NINETY-SIX, the new version of the 'Internal Block' is incorporated directly in the frame and prevents the fork crown from hitting the carbon frame in case of a crash or an extreme steering angle. As an extra protection, there are additional rubber bumpers on the frame to avoid any frame damage from the fork crown.

The bike features a perfectly positioned satellite on/off switch, at the head tube end of the top tube, and a well-protected satellite charging port, positioned in the main frame triangle, just above the motor. 

To give the eONE-SIXTY precise steering, fantastic ‘rolling over obstacles’ behaviour yet maximum traction, we have combined a 29er front wheel with a 2.5" tyre and a 650B rear wheel, equipped with a slightly wider 2.6" tyre. The perfect combination of precision, playfulness and traction. 

Specifically located openings on the carbon eONE-SIXTY models near the head tube which work like a chimney and allow the warm air to dissipate to guarantee the optimum operating temperature of the internal battery. The 'Thermo Gate' enables the battery to perform at its best, in any condition.

Due to the integrated battery, we were able to offer water bottle cage fixing points, allowing bottles of up to 0.75l to be fitted into the main frame triangle. Great if you want to keep your back free of hydration packs and backpacks. 

‘Boost’ standard front & rear. The extra 6 mm rear hub and 10 mm front hub spacing in comparison with conventional hubs brings the width up to 148 mm / 110 mm and gives the eONE-SIXTY wheels noticeably more stiffness and strength.

Technology

IMAGE

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

IMAGE

RACELITE 61 ALUMINIUM

We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.

IMAGE

CASTING MOTOR BRACKET

Sophisticated shape only possible due to casting technology, creating an integrated appearance as well as an extremely strong connection between the E-bike motor and frame for improved performance and reliability.

IMAGE

ENERGY GUARD

A two-component battery cover, which offers perfect protection for the internal battery. The softer (outer) layer reduces noises, seals the downtube perfectly and absorbs hits from trail debris easily, while the harder (inner) layer ensures that the battery does not get damaged and gives it the structural shape. All critical parts like the rubber strap and o-rings for perfect fitting can be replaced.