• material: aluminium
  • 700x25C max. wheelsize
  • 100x9/ 135x9mm axle standard
  • Pressfit bottom bracket standard
frame size XS, S, S/M, M/L, L, XL
  • 700x25C max. wheelsize
  • 17mm inner width
  • 24mm height
  • material: aluminium
  • Tubeless ready (tubeless tape and valves not included)
  • 100x9mm width front hub
  • 24 spoke holes
  • 130x9mm width rear hub
  • 28 spoke holes
Hubs QR
  • 50-34 teeth
  • 165 mm-4S/3S/XXS, 170 mm-XS/S, 172.5 mm-SM/ML, 175 mm-L/XL
crank size 165 mm-4S/3S/XXS, 170 mm-XS/S, 172.5 mm-SM/ML, 175 mm-L/XL
bottom bracket SM-BB71-41B, Pressfit 86.5
  • 11-30 teeth
  • 11 speed
chain KMC X11
shifters Shimano 105
front derailleur Shimano 105
brake lever Shimano 105
brakes Shimano 105
headset MERIDA M2331 Neck
  • 31.8mm diameter
  • material: aluminium
  • -5° stem angle
  • 70 mm-4S/3S, 80 mm-XXS/XS, 90 mm-S, 100 mm-SM/ML, 110 mm-L/XL
stem size 70 mm-4S/3S, 80 mm-XXS/XS, 90 mm-S, 100 mm-SM/ML, 110 mm-L/XL
  • material: aluminium
  • 380mm(4XS,3XS,XXS) , 400mm (XS-S) , 420mm (S/M-M/L) , 440mm (L-XL)
grip MERIDA ROAD EXPERT
  • 27.2mm diameter
  • 15mm setback
  • Carbon
seat clamp MERIDA EXPERT

weighed with 700C wheels and at frame size M-L, without pedals

Bike Frame Geometry Image
Frame Size XS S S/M M/L L XL
Tyre Sizes 28" 28" 28" 28" 28" 28"
Frame Size cm 47 50 52 54 56 59
St Seat Tubes mm 470 500 520 540 560 590
Tt Top Tubes mm 520 530 545 560 575 590
Cs Chain Stays mm 408 408 408 408 408 408
HTA head tube angle [°] 71 72 73 73 73 73.5
STA seat tube angle [°] 74.5 74 74 73.5 73 73
Bd Bottom Bracket Drops mm 66 66 66 66 66 66
Ht Head Tube Lengths mm 130 140 150 170 190 215
Fl Fork Lengths mm 375 375 375 375 375 375
R Reach mm 373 375 386 390 394 401
S Stacks mm 529 542 555 574 593 619
Wb Wheel Base mm 983 979 985 995 1005 1014
Sh Stand Over Height mm 720 744 762 779 798 826

CATEGORY HIGHLIGHTS

All models feature a full carbon fork with a tapered steerer to give precise, confidence-inspiring steering. All SCULTURA Alloy and CF2 carbon models feature a ‘regular’ 1 1/8" to 1 1/2" taper. The high-end SCULTURA CF4 frame has a slimmed down front profile and uses a 1 1/8" to 1 1/4" taper, the new REACTO frames a 1 1/2" to 1 1/4"taper.

Our wind tunnel learnings from the REACTO design project have been used to create a smaller aerodynamically optimised ‘NACA Fastback’ tube profile. The more extreme truncation of the teardrop shaped tubes enables perfect airflow at the lowest possible weight.

Technology

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

IMAGE

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.