eSPRESSO 400 S EQ

eSPRESSO 400 S EQ

 

Contact Local Shop
  • material: aluminium
  • 700x50C (with fender) max. wheelsize
  • 142x12mm axle standard
  • intube
  • max. 504 Wh
  • eSPRESSO L XS(43L)-S(47L)-M(51L)-L(55L)
  • Coil
  • 63mm suspension travel
  • 700x52C max wheelsize
display Shimano SC-E5000
speed sensor Shimano SM-DUE10
  • 20mm inner width
  • material: aluminium
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 142x12mm width rear hub
  • 36 spoke holes
  • Centerlock
  • 622-50
  • wire
  • reflecting line
  • 622-50
  • wire
  • reflecting line
  • including removeable lever, 6mm allen key
  • 38 teeth
  • Shimano FC-E6100
  • 11-36 teeth
  • 9 speed
chain KMC e9S
shifters Shimano Alivio M3100
headset MERIDA 2346 Neck
  • material: aluminium
  • 31.8mm diameter
  • adjustable
  • 90 mm-XS/S/M, 110 mm-L/XL
stem size 90 mm-XS/S/M, 110 mm-L/XL
  • material: aluminium
  • 660mm width
  • 15mm rise
grip MERIDA EXPERT TK
  • material: aluminium
  • 34.9mm diameter
  • 0mm setback
seat clamp MERIDA EXPERT
lights Herrmans H-Black MR4 E / Spanninga Commuter Glow XE integrated in MERIDA MIK HD carrier
frame lock Abus 5650 LH-3 lock
kickstand Massload CL-KA98
mudguard Sunnywheel SW-FA311-60E1 (MSB)
carrier MERIDA MIK HD Carrier with Spring clip & Spanninga rear light
pedal VP VPE-891

weighed with 700C wheels and at frame size M

Bike Frame Geometry Image
Frame Size XS S M L XL
Tyre Sizes 28" 28" 28" 28" 28"
St Seat Tubes mm 430 470 510 550 590
Tt Top Tubes mm 565 580 590 610 630
Cs Chain Stays mm 478 478 478 478 478
HTA head tube angle [°] 70.5 71 71 71.5 71.5
STA seat tube angle [°] 75 74.5 74.5 74 74
Bd Bottom Bracket Drops mm 70 70 70 70 70
Ht Head Tube Lengths mm 130 140 155 175 205
Fl Fork Lengths mm 475 475 475 475 475
R Reach mm 397 403 409 417 429
S Stacks mm 626 637 651.5 672.5 701
Wb Wheel Base mm 1114 1118 1129 1138 1159.5
Sh Stand Over Height mm 724 758 793 828 864
No. Item-No. Name Info Pieces Torque NM
1 A2300000048 SCREW M4x0.7 L8mm 1 3~5
2 A2311000067 RD-HANGER DH-057 1
3 A2300000129 SCREW M3x0.5 L10mm 2 2~4
4 A2258000012 CABLE GUIDE for M5 fixation 1
5 A2298000120 SCREW M5x0.8 L12mm 1 3~5
6 A2300000468 SCREW M8x1.25 L18.5mm 3 11~12
7 A2300000469 SCREW M8x1.25 L23mm 3 11~12
8 A2136000017 MOUNT for bottle cage 1
9 A2298000144 SCREW M5x0.8 L10mm 6 3~5
10 A2298000145 SCREW M5x0.8 L20mm 1 3~5
11 A2143000097 BLIND PLUG 1
12 A2161000127 CABLE GUIDE 1
13 A2300000500 COVER PIN 1 3~5
14 A2161000058 COVER MOUNT for ENEGRY GUARD 1
15 A2161000115 COVER for 504Wh battery 1
16 A2300000213 SCREW M3x0.5 L13.5mm 4 2~4
17 A2143000098 BLIND PLUG for key opening 1
18 A2258000079 CABLE PLUG for RD 1
19 A2258000099 CABLE PLUG for rear brake and speed sensor 1
21 CABLE GUIDE SMART ENTRY
22 A2143000076 COVER for carrier mount 2
23 A2298000142 SCREW M6x1.0 L12mm 2 6~8

To reduce production and delivery times, we are sometimes forced to make last-minute specification changes. Please be aware that those changes might not be reflected on these product pages and images.

HIGHLIGHTS

All models ride on fast-rolling 700c wheels, ideal for rides on roads, lanes and smooth tracks. We fit tyres with reflective sidewalls and puncture protection that will get you to your destination quickly and safely. However, our 'classic' eSPRESSO frames can also take 650B wheels if needed.

In our eSPRESSO range, you can choose between two frame options. The frame design with integrated battery technology, or the proven semi-integrated battery frame option, so that you can find the ideal bike for your preferences and your budget. Our integrated battery models come equipped with either the super-powerful EP8 or the more economical E6100 motor, while the semi-integrated battery models feature the entry-level E5000 power unit, giving you even more choice to select the perfect eSPRESSO for your needs.

All our eSPRESSO models come equipped with mudguards, lights, lock, rear rack and a kickstand, making them ready for anything from the moment you leave the store.

A two-component battery cover, which offers the perfect protection for the internal battery of these models. The softer (outer) layer reduces noises, seals the downtube perfectly and absorbs hits from trail debris easily, while the harder (inner) layer ensures that the battery does not get damaged and gives it the structural shape.

The system weight of a bike is the combined weight of bike, rider and additional luggage. The allowed system weight is 140 kg. As an e-bike is already heavier than a regular bike, and as it also makes it easier to transport larger amounts of luggage, it is imperative to certify a higher overall system weight. All MERIDA e-bikes, as well as all used componentry, go through a rigorous and e-bike specific testing schedule which mimics the higher forces and strains to guarantee the rider the highest level of safety.

We feature internal cable routing on all models. Cables are routed through the frame, entering and exiting through smooth sockets. Only a clever system for our internal guiding and fixing guarantees reliable and rattle free routing, whilst the cables are protected from moisture and dirt and gives the bike a cleaner look.

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trail gets rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

Technology

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

IMAGE

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

X-TAPER HEADTUBE
IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a Merida kickstand (or any commercial kickstand).

K-MOUNT
IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

IMAGE

CASTING MOTOR BRACKET

Sophisticated shape only possible due to casting technology, creating an integrated appearance as well as an extremely strong connection between the E-bike motor and frame for improved performance and reliability.

IMAGE

ENERGY GUARD

A two-component battery cover, which offers perfect protection for the internal battery. The softer (outer) layer reduces noises, seals the downtube perfectly and absorbs hits from trail debris easily, while the harder (inner) layer ensures that the battery does not get damaged and gives it the structural shape. All critical parts like the rubber strap and o-rings for perfect fitting can be replaced.