eONE-FORTY 8000

eONE-FORTY 8000

 

Contact Local Shop
  • material: carbon
  • 133mm suspension travel
  • 27.5x2.8" max. wheelsize
  • 148x12mm axle standard
  • intube
  • max. 630 Wh
frame size S, M, L, XL, XXL
  • Air
  • 140mm suspension travel
  • Tapered
  • 51mm fork offset
  • 29x2.5" max wheelsize
battery Shimano E8036 630Wh / E8035 504Wh S
display Shimano SC-E7000
speed sensor Shimano EW-SS301
  • 29mm inner width
  • material: aluminium
  • Tubeless ready (tubeless tape and valves not included)
  • 110x15mm width front hub
  • 32 spoke holes
  • Centerlock
  • 148x12mm width rear hub
  • 36 spoke holes
  • Centerlock
  • 29x2.4 "
  • fold
  • BlackChili
  • ProTection Apex
  • TR
  • 27.5x2.6 "
  • fold
  • BlackChili
  • ProTection Apex
  • TR
  • including removeable lever, 6/4mm allen key
  • 34 teeth
  • Shimano FCEM600
  • 165 mm for all sizes
bottom bracket included
  • 10-51 teeth
  • 12 speed
chain CN-M6100
shifters Shimano SL -MT500-IL / Shimano XT M8100 12
rear derailleur Shimano XT RDM8100 Shadow+ 12
headset MERIDA-8152
  • material: aluminium
  • 35mm diameter
  • 0° stem angle
  • GoPro & Supernova mount
  • 50 mm all sizes
stem size 50 mm all sizes
  • 780mm width
  • 20mm rise
grip MERIDA EXPERT EC
  • 30.9mm diameter
  • 0mm setback
  • S: 125mm travel seatpost - M/L 150mm travel seatpost - XL/XXL 170mm travel seatpost
seat clamp MERIDA EXPERT clamp
lights LEZYNE E-BIKE POWER STVZO E115, reverse MERIDA Custom Mount / USB REAR Light CG-214RG
mudguard C093-02F + C093-02R
pedal VP VPE-527

weighed with 29" wheels and at frame size M, without pedals, incl. lights

Bike Frame Geometry Image
Frame Size S M L XL XXL
Tyre Sizes 29/27.5" 29/27.5" 29/27.5" 29/27.5" 29/27.5"
St Seat Tubes mm 405 420 440 470 500
Tt Top Tubes mm 561 582 603 626 650
Cs Chain Stays mm 439.5 439.5 439.5 439.5 439.5
HTA head tube angle [°] 66.5 66.5 66.5 66.5 66.5
STA seat tube angle [°] 76.5 76.5 76.5 76.5 76.5
Bd Bottom Bracket Drops mm 24 24 24 24 24
Ht Head Tube Lengths mm 110 115 120 135 150
Fl Fork Lengths mm 551 551 551 551 551
R Reach mm 410 429.5 449.5 469.5 489.5
S Stacks mm 622 626.5 631 644.5 658
Wb Wheel Base mm 1160 1182 1204 1230.5 1256.5
Sh Stand Over Height mm 736 731 727 734 748
No. Item-No. Name Info Pieces Torque NM
1 A2294000162 WASHER OD21.1mm ID15.1mm H3mm 2
2 A2221000043 BEARING 3802V-2RS OD24mm ID15mm W7mm 2
3 A2300000263 BOLT M10x1 OD15mm L64mm 1
4 A2300000264 SCREW M10x1 L20mm 1 16~18
5 A2300000364 SCREW M6x1 L13.5mm 1 10~12
6 A2300000356 BOLT M6x1 OD10mm L51.5mm 1
7 A2035000014 LINK 1
8 A2221000034 BEARING 6800V-2RS OD19mm ID10mm W5mm 2
9 A2300000235 CREW M10x1 L15mm 2 14~16
10 A2294000093 WASHER OD15mm ID10.1mm H3mm 2
11 A2221000035 BEARING 6801V-2RS OD21mm ID12mm W5mm 2
12 A2300000266 SCREW M8x0.75 L16mm 1 12~14
13 A2300000265 BOLT M8x0.75 OD12mm L68mm 1
14 A2294000023 WASHER OD15mm ID12mm H3mm 2
15 A2294000099 WASHER OD17.5mm ID12.1mm H2mm 4
16 A2221000039 BEARING 12214V-2RS OD21mm ID12mm W4mm 8
17 A2300000433 BOLT M8x0.75 OD12mm 4
18 A2300000434 SCREW M8x0.75 L14mm 4 12~14
19 A2300000536 SCREW M4x0.7 L8mm 1 2~4
20 A2311000067 RD-HANGER DH-057 1
21 A2300000185 SCREW M3x0.5 L20.5mm 2 2~4
SMALL PARTS see pdf file

To reduce production and delivery times, we are sometimes forced to make last-minute specification changes. Please be aware that those changes might not be reflected on these product pages and images.

 

HIGHLIGHTS

Comes equipped with the new EP8 motor from Shimano STePS. It offers an increased performance of 85 Nm, less weight, a further reduction in size and less friction. On top of that, the new internal battery offers an extended range and super-fast charging capabilities.

First introduced in 2015, the e-bike version of the 'Internal Block' is incorporated directly into the frame and prevents the fork crown from hitting the frame in case of a crash or an extreme steering angle. As an extra protection, there are additional rubber bumpers on the frame to avoid any frame damage from the fork crown.

To give the e-full suspension bikes precise steering, fantastic ‘rolling over obstacles’ behaviour yet maximum traction, we have combined a 29er front wheel with a 2.5" tyre and a 650B rear wheel, equipped with a slightly wider 2.6" tyre. The perfect combination of precision, playfulness and traction.

Specifically located openings on the carbon models near the head tube which work like a chimney and allow the warm air to dissipate to guarantee the optimum operating temperature of the internal battery. The 'Thermo Gate' enables the battery to perform at its best, in any condition.

Due to the integrated battery, we were able to offer water bottle cage fixing points, allowing bottles or accessories like a lock or pump to the frame to be fitted into the main frame triangle. Great if you want to keep your back free of hydration packs and backpacks.

These models are available in two different frame options. A carbon front end combined with a 6061 aluminium rear end, or a more budget-friendly all-aluminium chassis.

Technology

IMAGE
Back to overview

HFS - HYDRO FORMING SYSTEM

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

Watch Video
IMAGE
Back to overview

X-TAPER HEADTUBE

Steering precision is vital to safe and confident handling, and the X-TAPER HEADTUBE allows us to significantly boost this precision. A larger headset diameter at the bottom paired with a smaller one at the top helps to deal with the strains modern riding and equipment can put on the headtube, all without adding unnecessary weight. It allows tapered forks to be fitted with ease and delivers precise and confidence-inspiring steering.

Watch Video
IMAGE
Back to overview

SMOOTH WELDING

This is a process we use to give a nice flat finish to our welds instead of the scaled, 'stack of coins' effect TIG welded joints often have. The welder uses the welding torch to go over the joint twice, helping to smooth out the filler material. It takes a lot of skill to do this, but it delivers strong and smart-looking frames that have the appearance of a carbon fibre frame at first look.

Watch Video
IMAGE
Back to overview

INTERNAL CABLE ROUTING

On the majority of our frames, we run the gear and brake cables and hoses through the frame. The cables enter and exit the frame through smooth sockets, or we use one of our other systems like SMART ENTRY or WIRE PORT to be routed through. Running the cables inside the frame protects them from the elements, gives a clean and neat look and can offer aerodynamic advantages.

Watch Video
IMAGE
Back to overview

DI2 READY

Shimano's Di2 electronic shifting system offers fast, smooth and reliable shifting. In particular, in the road world, it has proven itself as the primary choice when top performance is at the top of the agenda. With that in mind, we have a broad selection of performance road frames that are Di2 READY and can accommodate the electrical cable, battery and other little tweaks that the system requires.

Watch Video
IMAGE
Back to overview

NANO MATRIX CARBON

NANO MATRIX CARBON is a special kind of carbon fibre where we add extremely tiny, nano-scale particles to the resin that binds the individual carbon fibres together. These then work on a molecular level to protect them from damage. It’s so effective that it can actually increase the finished carbon fibre’s impact resistance by up to 40%, allowing us to build stronger and lighter composite frames that result in a faster and tougher bike.

Watch Video
IMAGE
Back to overview

AWS ANTI WRINKLE SYSTEM

This is a method we use to manufacture our carbon fibre frames. First, the carbon fibre that makes up the frame is laid around special formers. We then use a bladder to compress the layers against the outside of the frame mould, giving a smooth and wrinkle-free internal finish, removing any voids in between the layers of carbon that can cause potential weak points, resulting in a stronger, lighter frame.

Watch Video
IMAGE
Back to overview

RACELITE 61 ALUMINIUM

We use a minimum of 6061 grade aluminium on all our bikes. It’s particularly well suited to being shaped with our hydroforming and technoforming processes, which allow us to vary the wall thickness to create double-butted tubing and complex frame shapes. It’s also an alloy that welds easily, and once it has been carefully heat treated to maximise strength, it means we can create strong and lightweight bicycle frames for you to enjoy.

Watch Video
IMAGE
Back to overview

K-MOUNT

Integrated mount on the chainstay to fit a Merida kickstand (or any commercial kickstand).

Watch Video
IMAGE
Back to overview

THERMO GATE

Specifically located openings near the head tube which work like a chimney and allow the warm air to dissipate to guarantee the optimum operating temperature of the internal battery. The Thermo Gate enables the battery to perform at its best, in any condition.

Watch Video
IMAGE
Back to overview

ENERGY GUARD

A two-component battery cover, which offers excellent protection for the internal battery. The softer (outer) layer reduces noises, seals the downtube to keep out dirt and water and absorbs hits from trail debris easily, while the harder (inner) layer ensures that the battery does not get damaged and gives it the structural shape. All critical parts, such as the rubber strap and o-rings, can be replaced as needed.

Watch Video
IMAGE
Back to overview

INTERNAL BLOCK

First introduced in our 2015 Ninety-Six, the latest version of the 'Internal Block' is incorporated directly in the frame and prevents the fork crown from hitting the frame in case of a crash or an extreme steering angle. As an extra layer of protection, there are added rubber bumpers on the frame to avoid any frame damage from the fork crown.