MATTS 7. 100

MATTS 7. 100

Contact Local Shop
  • material: aluminium
  • 27.5 wheelsize
  • 135x9mm axle standard
  • BSA bottom bracket standard
frame size XS, S, M, L
  • Coil
  • 100mm suspension travel
  • Lockout
  • 46mm fork offset
  • 20mm inner width
  • material: aluminium
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 135x9mm width rear hub
  • 32 spoke holes
  • Centerlock
  • 40-30-22 teeth
  • 170 mm-XS, 175 mm-M up
crank 170 mm-XS, 175 mm-M up
bottom bracket Shimano UN100 BSA
  • 11-36 teeth
  • 9 speed
chain KMC M99
shifters Shimano Altus
front derailleur Shimano M3000
rear derailleur Shimano Alivio
  • 180 mm
  • 160 mm
headset MERIDA M44PSE neck
  • material: aluminium
  • 31.8mm diameter
  • 15° stem angle
  • XS/S/M-80 mm, L-90 mm
stem size XS/S/M-80 mm, L-90 mm
  • material: aluminium
  • 660mm width
  • 25mm rise
  • material: aluminium
  • 27.2mm diameter
  • 12mm setback
seat clamp MERIDA COMP QR
pedal VP VPE-891

weighed at frame size S and 27.5" wheels without pedals

Bike Frame Geometry Image
Frame Size XS S M L
Tyre Sizes 27.5" 27.5" 27.5" 27.5"
St Seat Tubes mm 343 381 432 470
Tt Top Tubes mm 550 560 575 585
Cs Chain Stays mm 430 430 430 430
HTA head tube angle [°] 69.5 69.5 70 70
STA seat tube angle [°] 74.5 74.5 74.5 74.5
Bd Bottom Bracket Drops mm 63 63 63 63
Ht Head Tube Lengths mm 95 100 105 115
Fl Fork Lengths mm 493 493 493 493
R Reach mm 384 392 405 413
S Stacks mm 600 605 612 621
Wb Wheel Base mm 1051 1062 1072 1083

To reduce production and delivery times, we are sometimes forced to make last-minute specification changes. Please be aware that those changes might not be reflected on these product pages and images.


6061 double butted and technoformed aluminium frame a with more relaxed geometry. Comes equipped with internal cable routing as well as F, C and K-mounts.

A more compact top tube, paired with a higher front end, provide the MATTS with a more upright riding position, delivery extra riding comfort for the rider as well as a better view of what lies ahead.

Our MATTS offer either 650B or 26" wheels, depending on model and frame size. The top models of the MATTS line-up feature fast rolling 650B wheels, while the middle range offers the smaller models with easy to accelerate 26" wheels. The MATTS 10-V entry model comes with 26" wheels throughout all frame sizes.

All models feature powerful and easy to modulate hydraulic disc brakes. Hydraulic disc brakes offer great stopping power in any weather, are more or less maintenance-free and are not affected by rough or kinked cables.

The MATTS frames have bosses and fixture points to attach a water bottle cage, rear fenders, a rear rack and a kickstand, making it super versatile if and when it gets used as a commuter or more urban-focused bike.

Aluminium welding is the strong point of our factories. 48 years of production knowledge and experience go into every frame we make. The MATTS is one of the most long-standing bike categories in our history and is proud to carry the name MERIDA.

We feature internal cable routing on all models. Cables are routed through the frame, entering and exiting through smooth sockets. Only a clever system for our internal guiding and fixing guarantees reliable and rattle free routing, whilst the cables are protected from moisture and dirt and gives the bike a cleaner look.




Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.



Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.



Ensures that internally routed cables and wires can’t move freely and remain easily accessible for servicing.



We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.



Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core. 



‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.



Integrated mount on the chainstay to fit a Merida kickstand (or any commercial kickstand).



‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.