frame JULIET TFS
frame size XS, S, M, L
color BLUE (DARK BLUE)
  • Coil
  • 100mm suspension travel
  • Lockout
brake front Shimano MT-200
brake rear Shimano MT-200
brake lever Shimano MT-200
headset MERIDA M44PSE Neck
  • 660mm width
  • 25mm rise
  • 31.8mm diameter
  • 15° stem angle
grip MERIDA Comp EC
derailleur front Shimano M3000
derailleur rear Shimano Alivio
shifter front Shimano Altus
shifter rear Shimano Altus
  • 27.2mm diameter
  • 12mm setback
seat clamp MERIDA Comp QR
saddle MERIDA Juliet Sport V
  • VPE-891
chain KMC M99
chainguard attached
  • 11-34 teeth
  • 9 speed
bottom braket Shimano UN100 BSA
  • 20mm inner width
  • 27.5x2.2"
  • folding
  • 27.5x2.2"
  • folding
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 135x9mm width rear hub
  • 32 spoke holes
  • Centerlock
spokes Black stainless

weighed at frame size S (w/o pedals)

Bike Frame Geometry Image
Frame Size XS S M L
Tire Sizes 27.5" 27.5" 27.5" 27.5"
Frame Size Cm 34 38 43 47
ST seat tube [mm] 343 381 432 470
TT top tube [mm] 550 560 575 585
CS chain stay length [mm] 430 430 430 430
HTA head tube angle [°] 69.5 69.5 70 70
STA seat tube angle [°] 74.5 74.5 74.5 74.5
BD bottom bracked drop [mm] 63 63 63 63
HT head tube [mm] 95 100 105 115
FL fork length [mm] 493 493 493 493
R reach [mm] 384 392 405 413
S stack [mm] 600 605 612 621
WB wheel base [mm] 1051 1062 1072 1083
SH stand over height [mm] 603 635 686 715

Technologies

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

DOWN TUBE EXIT

Ensures that internally routed cables and wires can’t move freely and remain easily accessible for servicing.

IMAGE

CHAINSTAY POST MOUNT DISC

In-board brake mounts are positioned within the rear triangle to protect them. The caliper supported by the stronger chainstay is able to distribute braking forces better. Internal cable routing is also easier and neater via the chainstay.

IMAGE

REMOTE LOCKOUT

The suspension fork and/or rear shock can be locked out via a ‘remote control’ lever on the handlebar.

IMAGE

RACELITE 61 ALUMINIUM

We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.

IMAGE

TFS - TECHNO FORMING SYSTEM

Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core. 

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT DROP-OUT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.