ONE-TWENTY 600

 

You are looking for a capable mid-travel aluminium trail bike that outperforms its travel numbers on the descends but also offers great climbing performance on the way back up again. Look no further!

With 130 mm at the front, 120 mm at the rear, a reliable and smooth-shifting Shimano drivetrain and a confidence boosting dropper post, our ONE-TWENTY 600 is ready for your next trail adventure. The proven FLOAT LINK suspension design provides well-controlled and fully usable travel, allowing for even the most demanding trails and tracks to be tackled with ease.

Completely redesigned for 2019, the ONE-TWENTY continues its success story into the 2022 season. With multiple test successes, including a 'BEST IN TEST' in Enduro Mountainbike Magazine for the 2020 ONE-TWENTY 8000, our mid-travel bike will once again impress with its versatility and unstoppable trail munching capabilities. While very much a trail bike at heart, the modern yet balanced trail bike geometry, paired with fantastic frame stiffness, created a mid-travel bike that is super capable on rough trails but also carries speed perfectly on less technically demanding tracks. And to give riders a maximum choice, we will offer the ONE-TWENTY again in the 'classic' 120 mm rear/130 mm front travel configuration or the slightly more XC biased 100 mm rear/120 mm front travel 'RC' setup, which also has a slightly steeper head angle and seat angle for improved climbing performance.

  • Triple butted aluminium frame with trail orientated geometry
  • 120 mm FLOAT LINK activated rear wheel travel and 130 mm fork travel
  • Lockout front and rear
  • Shimano single chainring drivetrain
  • Dropper post
  • 29er wheels
  • 120mm suspension travel
  • material: aluminium
  • 29 wheelsize
  • 148x12mm axle standard
  • BB92 bottom bracket standard
frame size S, M, L, XL
color DARK STRAWBERRY (BLACK)
  • Air
  • 130mm suspension travel
  • Tapered
  • 44mm fork offset
  • 29x2.6" max. wheelsize
headset FSA NO.47/50
  • material: aluminium
  • 760mm width
  • 20mm rise
  • material: aluminium
  • 35mm diameter
  • 0° stem angle
  • 50 mm
grip MERIDA COMP EC
  • 30.9mm diameter
  • 0mm setback
  • S: 100mm travel seatpost - M: 125mm travel seatpost - L/XL: 150mm travel seatpost
bottom bracket Race Face BB BB92– Ø24mm
chain KMC X12
  • 32 teeth
  • 170 mm-S, 175 mm-M up
  • 10-51 teeth
  • 12 speed
  • 29x2.35"
  • fold
  • TR EXO Dual
  • 29x2.35"
  • fold
  • TR EXO Dual
  • including removeable lever, 6/4mm allen key
Bike Frame Geometry Image
Frame Size S S M M L XL
Tire Sizes 27.5" 29" 27.5" 29" 29" 29"
St Seat Tubes Mm 400 400 440 440 480 520
Tt Top Tubes Mm 571 572 593 592 614 637
Cs Chain Stays Mm 430 435 430 435 435 435
Hta Head Tube Angles Deg 66.8 67.3 66.8 67.3 67.3 67.3
Sta Seat Tube Angle Deg 75 75.5 75 75.5 75.5 75.5
Bd Bottom Bracket Drops Mm 21 40 21 40 40 40
Ht Head Tube Lengths Mm 105 95 115 95 105 115
Fl Fork Lengths Mm 522 541 522 541 541 541
R Reachs Mm 415 415 435 435 455 475
S Stacks Mm 581 607 590 607 616 626
Wb Wheel Base Mm 1130 1141 1154 1161 1185 1208
Sh Stand Over Height Mm 698 707 726 730 759 787

Technologies

IMAGE
Back to overview

PROLITE 66 TRIPLE BUTTED ALUMINUM

When creating high-end aluminium frames, we use our proven PROLITE 66 (6066) aluminium, as it is incredibly light and durable. In addition, it works exceptionally well with our hydroforming technology, allowing us to create complex shapes, featuring triple butted wall thicknesses, an almost carbon-like appearance and the best possible stiffness-to-weight ratio. While lesser alloys might be cheaper, it is the ideal choice for high-performance bicycle frames.

Watch Video
IMAGE
Back to overview

X-TAPER HEADTUBE

Steering precision is vital to safe and confident handling, and the X-TAPER HEADTUBE allows us to significantly boost this precision. A larger headset diameter at the bottom paired with a smaller one at the top helps to deal with the strains modern riding and equipment can put on the headtube, all without adding unnecessary weight. It allows tapered forks to be fitted with ease and delivers precise and confidence-inspiring steering.

Watch Video
IMAGE
Back to overview

SMOOTH WELDING

This is a process we use to give a nice flat finish to our welds instead of the scaled, 'stack of coins' effect TIG welded joints often have. The welder uses the welding torch to go over the joint twice, helping to smooth out the filler material. It takes a lot of skill to do this, but it delivers strong and smart-looking frames that have the appearance of a carbon fibre frame at first look.

Watch Video
IMAGE
Back to overview

INTERNAL CABLE ROUTING

On the majority of our frames, we run the gear and brake cables and hoses through the frame. The cables enter and exit the frame through smooth sockets, or we use one of our other systems like SMART ENTRY or WIRE PORT to be routed through. Running the cables inside the frame protects them from the elements, gives a clean and neat look and can offer aerodynamic advantages.

Watch Video
IMAGE
Back to overview

DOWN TUBE EXIT

DOWN TUBE EXIT is a feature seen on some of our frames with internally routed cables. By slightly overlapping the downtube where it connects to the bottom bracket, it leaves a small space that allows cables to exit easily. This means they are easily accessible for routine maintenance or replacement, but it prevents excessive movement and noise that can cause wear and distraction.

Watch Video
IMAGE
Back to overview

SMART ENTRY

Many of our frames offer internal cable routing, where the gear and brake cables are run through the frame for maximum protection and a clean look. Some internally run cables can rattle when riding over uneven surfaces, but our SMART ENTRY system prevents this from happening. Cables, housings and brake hoses are clamped under tension to prevent noisy cable movement. All inlets are completely interchangeable to deal with any kind of cable or wire.

Watch Video
IMAGE
Back to overview

DI2 READY

Shimano's Di2 electronic shifting system offers fast, smooth and reliable shifting. In particular, in the road world, it has proven itself as the primary choice when top performance is at the top of the agenda. With that in mind, we have a broad selection of performance road frames that are Di2 READY and can accommodate the electrical cable, battery and other little tweaks that the system requires.

Watch Video
IMAGE
Back to overview

FLOAT LINK REAR SUSPENSION

A suspension system where the lower shock mount moves as well as the upper link, giving a supple and sensitive feel over bumps. This system allows our engineers to precisely manipulate the leverage ratio, giving ultimate control of the progression of the suspension so that a FLOAT LINK rear suspension system feels like it offers more wheel travel than the numbers alone suggest.

IMAGE
Back to overview

NON-SLIP TIGHTENING

This system means you only need a single tool to tighten important bolts, making it easy to secure them while out on the trail and also making routine maintenance faster and simpler. The bolts have a specially shaped head on one end that fits into a matching recess in the frame, preventing rotation. That means there is no hardware bonded into the frame itself, so damaged threads or bolts can be easily replaced.

Watch Video