CROSSWAY 300

 

Comfortable, sleek and modern trekking/hybrid bike with Shimano drivetrain and hydraulic disc brakes. Ideal for the day to day jobs around town and fun-packed adventures in the open countryside.

In comparison to its slightly more sporty brothers, the 300 doesn't just bring a lightweight aluminium frame with a comfort-orientated geometry and an impact-absorbing suspension fork to the table, it offers a couple of extras in the comfort department. A suspension seat post provides added comfort on rougher roads and tracks and an adjustable stem which makes finding your personal setup even easier. Pair all of this with powerful brakes and a wide gear range, and you have yourself a super versatile day-to-day bike.

The CROSSWAY family has been the MERIDA range's backbone since its introduction. They are used worldwide and are proven as a reliable, versatile and fun-packed way of getting around. Designed to provide a comfortable place to take in the surroundings thanks to an upright riding position and comfort focused equipment such as suspension fork, suspension seat posts and adjustable stems, they offer the perfect blend of comfort, enjoyment and all-round functionality. They are suitable for fitness training, commuting and leisurely rides through forests and on trails. Made from high-quality, lightweight aluminium with the ability to mount mudguards, racks and kickstands, the CROSSWAY range is the perfect choice for everyday riding. The fitted 700c wheels cover ground quickly, while the extra volume of the 40 mm wide tyres offers puncture protection, grip and comfort. All CROSSWAY models are available as a low step-through frame, making mounting and dismounting straightforward.

  • Lightweight aluminium frame with comfort geometry
  • Lockable suspension fork
  • Hydraulic disc brakes
  • Shimano/FSA drivetrain
  • Multiple fixing points for rear rack and fenders
  • Suspension seat post and adjustable stem
  • material: aluminium
  • 700x50C max. wheelsize
  • 135x9mm axle standard
  • BSA bottom bracket standard
frame size XXS, XS, S, M, L, XL
color GLOSSY BLACK (MATT SILVER)
  • Coil
  • 63mm suspension travel, Lockout
  • 700x50C max. wheelsize
headset MERIDA M2346
  • material: aluminium
  • 660mm width
  • 25mm rise
  • material: aluminium
  • 31.8mm diameter
  • adjustable
  • XXS/XS/S/M 95 mm, L/XL 110 mm
grip MERIDA EXPERT EC
derailleur (f) Shimano Deore
  • 30.9mm diameter
  • 10mm setback
  • 45mm seatpost suspension travel
saddle MERIDA CROSS SPORT
bottom bracket FSA TH-7420ST Cartridge Bearing
pedal VP VPE-891
chain KMC X10
  • 48-36-26 teeth
  • 170 mm-XXS/XS/S, 175 mm-M/XL
  • 11-34 teeth
  • 10 speed
  • 700x40C
  • wire
  • reflective stripe, Silkshild
  • 700x40C
  • wire
  • reflective stripe, Silkshild
axle front QR
Bike Frame Geometry Image
Frame Size XXS XS S M L XL
Tire Sizes 28" 28" 28" 28" 28" 28"
St Seat Tubes Mm 390 430 470 510 550 590
Tt Top Tubes Mm 560 565 580 590 610 630
Cs Chain Stays Mm 460 460 460 460 460 460
Hta Head Tube Angles Deg 70.5 70.5 71 71 71.5 71.5
Sta Seat Tube Angle Deg 74 74 73.5 73.5 73 73
Bd Bottom Bracket Drops Mm 70 70 70 70 70 70
Ht Head Tube Lengths Mm 130 130 140 155 175 205
Fl Fork Lengths Mm 468 468 468 468 468 468
R Reachs Mm 382 387 393 399 406 418
S Stacks Mm 620 620 631 645 667 695
Wb Wheel Base Mm 1076 1081 1085 1096 1104 1125
Sh Stand Over Height Mm 678 713 748 782 817 854

Technologies

IMAGE
Back to overview

X-TAPER HEADTUBE

Steering precision is vital to safe and confident handling, and the X-TAPER HEADTUBE allows us to significantly boost this precision. A larger headset diameter at the bottom paired with a smaller one at the top helps to deal with the strains modern riding and equipment can put on the headtube, all without adding unnecessary weight. It allows tapered forks to be fitted with ease and delivers precise and confidence-inspiring steering.

Watch Video
IMAGE
Back to overview

SMOOTH WELDING

This is a process we use to give a nice flat finish to our welds instead of the scaled, 'stack of coins' effect TIG welded joints often have. The welder uses the welding torch to go over the joint twice, helping to smooth out the filler material. It takes a lot of skill to do this, but it delivers strong and smart-looking frames that have the appearance of a carbon fibre frame at first look.

Watch Video
IMAGE
Back to overview

INTERNAL CABLE ROUTING

On the majority of our frames, we run the gear and brake cables and hoses through the frame. The cables enter and exit the frame through smooth sockets, or we use one of our other systems like SMART ENTRY or WIRE PORT to be routed through. Running the cables inside the frame protects them from the elements, gives a clean and neat look and can offer aerodynamic advantages.

Watch Video
IMAGE
Back to overview

DOWN TUBE EXIT

DOWN TUBE EXIT is a feature seen on some of our frames with internally routed cables. By slightly overlapping the downtube where it connects to the bottom bracket, it leaves a small space that allows cables to exit easily. This means they are easily accessible for routine maintenance or replacement, but it prevents excessive movement and noise that can cause wear and distraction.

Watch Video
IMAGE
Back to overview

RACELITE 61 ALUMINIUM

We use a minimum of 6061 grade aluminium on all our bikes. It’s particularly well suited to being shaped with our hydroforming and technoforming processes, which allow us to vary the wall thickness to create double-butted tubing and complex frame shapes. It’s also an alloy that welds easily, and once it has been carefully heat treated to maximise strength, it means we can create strong and lightweight bicycle frames for you to enjoy.

Watch Video
IMAGE
Back to overview

TFS - TECHNO FORMING SYSTEM

Manipulating the tube shape and thickness greatly impacts the appearance, weight and functionality of our aluminium frames. One technology that allows us to do that is TECHNO FORMING, where plain aluminium tubes get mechanically formed by using an external form and an internal metal core. The result, beautifully shaped tubes with varying wall thickness, ready to be used to create our technoformed aluminium frames.

Watch Video
IMAGE
Back to overview

F-MOUNT

Being able to turn your bike into an all-weather commuter that has mudguards and other fittings can be a real plus, in particular when riding on wet and perhaps muddy roads and tracks on a regular basis. To make fitting easy, some of our bikes are F-MOUNT equipped. These integrated fittings mounts make adding mudguards fast and simple. Please note that some bikes require model-specific mudguards.

Watch Video
IMAGE
Back to overview

K-MOUNT

When using your bike in an urban environment, where you might not always have the option to use a specific bike stand, a kickstand is an ideal solution to park your bike safely. Some of our bikes come with a neatly integrated K-MOUNT, which makes fitting a MERIDA kickstand (or any commercial kickstand) easy. And if you don’t want to have a kickstand and prefer the clean appearance of your frame, the K-MOUNT is neatly tucked away underneath your chainstay, difficult to spot if you don’t know it is there.

Watch Video
IMAGE
Back to overview

C-MOUNT

Similar to our F-MOUNT, where various fixing points for mudguards are part of the frame offering, the C-MOUNT equipped bikes have the fixing points for a rear rack already integrated, making fitting fast, simple and reliable. The C-MOUNTS are an additional feature that improves the day-to-day versatility by adding loading capacity to your bike, ideal for commuting and shopping trips. Please note that some bikes require model-specific rear racks.

Watch Video