eONE-SIXTY 700

 

Ride further and push harder with an eMTB that can take on the toughest tracks thanks to a high-value all aluminium frame that delivers sublime handling and all the power of Shimano’s EP8 drive unit.

Riding further and pushing harder is what the eONE-SIXTY 700 is all about, with a high-value, high-performance all-aluminium frame that houses the refined yet powerful EP8 drive unit and integrated 630 Wh battery. Add in our proven geometry and tried and tested suspension and you’ve got a machine that’ll iron out the roughest trails, uphill or down, meaning you can keep going when lesser machines falter.

The eONE-SIXTY has seamlessly followed in the footsteps of the 'original' eONE-SIXTY in becoming the most decorated, tested and awarded bike in MERIDA's history. This highly anticipated bike managed to collect a vast amount of amazing test results and wins, as well as a few more industry awards to its tally. E-Mountainbike gave it the 'BEST IN TEST' approval in their 'Best of 2021' eMTB group test, World of MTB also gave it their 'Best of 2021' award and FREERIDE gave the 9000 the almost perfect score of 9.5 out of ten, just to mention a few. For 2022, our all-aluminium e-enduro bike will be equipped with the proven EP8 motor from Shimano as well as with the range extending 630 Wh or 750 Wh (model specific) internal battery. A perfectly tuned MTB geometry, paired with a tough all-aluminium frame, seamlessly integrated battery and a 29er/27.5" wheel combo that delivers poise and confidence on the toughest trails, the eONE-SIXTY is ready for anything you can throw at it.

  • Tough all-aluminium chassis with integrated 630 Wh battery
  • Powerful Shimano EP8 drive unit
  • Mixed wheel size setup with 160/150 mm travel split
  • High-quality Shimano brakes and wide-range drivetrain
  • Marzocchi fork and Fox rear suspension
  • Multiple award and test winning frame geometry
  • material: aluminium
  • 150mm suspension travel
  • 27.5x2.8" max. wheelsize
  • 148x12mm axle standard
  • intube
frame size XS, S, M, L, XL
color DARK STRAWBERRY (BLACK)
  • Air
  • 160mm suspension travel
  • Tapered
  • 51mm fork offset
  • 29x2.6" max wheelsize
headset MERIDA 8152
  • 780mm width
  • 20mm rise
  • material: aluminium
  • 35mm diameter
  • 0° stem angle
  • GoPro & Supernova mount
  • 40 mm
grip MERIDA EXPERT EC
derailleur (r) Shimano XT RDM8100 Shadow+ 12
  • 30.9mm diameter
  • 0mm setback
  • XS 100mm travel seatpost - S 125mm travel seatpost - M/L 150mm travel seatpost - XL 170mm travel seatpost
  • V-mount
  • incl. MERIDA minitool
pedal VP VPE-527
chain KMC e12T EPT
  • 10-51 teeth
  • 12 speed
  • 29x2.5 "
  • fold
  • TR EXO+ 3C MaxxGrip
  • 27.5x2.6 "
  • fold
  • 3C EXO+ TR
  • including removeable lever, 6/4mm allen key
battery Shimano E8036 630Wh / Shimano E8035 504Wh for XS only
display Shimano SC-E7000
  • StVZO
  • reverse MERIDA Custom Mount
Bike Frame Geometry Image
Frame Size XS S M L XL
Tire Sizes 29/27.5" 29/27.5" 29/27.5" 29/27.5" 29/27.5"
St Seat Tubes Mm 405 415 430 450 470
Tt Top Tubes Mm 563 584 605 626 647
Cs Chain Stays Mm 439.5 439.5 439.5 439.5 439.5
Hta Head Tube Angles Deg 65.5 65.5 65.5 65.5 65.5
Sta Seat Tube Angle Deg 75.5 75.5 75.5 75.5 75.5
Bd Bottom Bracket Drops Mm 17.5 17.5 17.5 17.5 17.5
Ht Head Tube Lengths Mm 110 115 120 125 130
Fl Fork Lengths Mm 571 571 571 571 571
R Reachs Mm 400 420 440 460 480
S Stacks Mm 633 633 638 642 647
Wb Wheel Base Mm 1170 1190 1212 1234 1256
Sh Stand Over Height Mm 737 736 733 739 753

Technologies

IMAGE
Back to overview

HFS - HYDRO FORMING SYSTEM

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

Watch Video
IMAGE
Back to overview

X-TAPER HEADTUBE

Steering precision is vital to safe and confident handling, and the X-TAPER HEADTUBE allows us to significantly boost this precision. A larger headset diameter at the bottom paired with a smaller one at the top helps to deal with the strains modern riding and equipment can put on the headtube, all without adding unnecessary weight. It allows tapered forks to be fitted with ease and delivers precise and confidence-inspiring steering.

Watch Video
IMAGE
Back to overview

SMOOTH WELDING

This is a process we use to give a nice flat finish to our welds instead of the scaled, 'stack of coins' effect TIG welded joints often have. The welder uses the welding torch to go over the joint twice, helping to smooth out the filler material. It takes a lot of skill to do this, but it delivers strong and smart-looking frames that have the appearance of a carbon fibre frame at first look.

Watch Video
IMAGE
Back to overview

INTERNAL CABLE ROUTING

On the majority of our frames, we run the gear and brake cables and hoses through the frame. The cables enter and exit the frame through smooth sockets, or we use one of our other systems like SMART ENTRY or WIRE PORT to be routed through. Running the cables inside the frame protects them from the elements, gives a clean and neat look and can offer aerodynamic advantages.

Watch Video
IMAGE
Back to overview

SMART ENTRY

Many of our frames offer internal cable routing, where the gear and brake cables are run through the frame for maximum protection and a clean look. Some internally run cables can rattle when riding over uneven surfaces, but our SMART ENTRY system prevents this from happening. Cables, housings and brake hoses are clamped under tension to prevent noisy cable movement. All inlets are completely interchangeable to deal with any kind of cable or wire.

Watch Video
IMAGE
Back to overview

DI2 READY

Shimano's Di2 electronic shifting system offers fast, smooth and reliable shifting. In particular, in the road world, it has proven itself as the primary choice when top performance is at the top of the agenda. With that in mind, we have a broad selection of performance road frames that are Di2 READY and can accommodate the electrical cable, battery and other little tweaks that the system requires.

Watch Video
IMAGE
Back to overview

RACELITE 61 ALUMINIUM

We use a minimum of 6061 grade aluminium on all our bikes. It’s particularly well suited to being shaped with our hydroforming and technoforming processes, which allow us to vary the wall thickness to create double-butted tubing and complex frame shapes. It’s also an alloy that welds easily, and once it has been carefully heat treated to maximise strength, it means we can create strong and lightweight bicycle frames for you to enjoy.

Watch Video
IMAGE
Back to overview

K-MOUNT

When using your bike in an urban environment, where you might not always have the option to use a specific bike stand, a kickstand is an ideal solution to park your bike safely. Some of our bikes come with a neatly integrated K-MOUNT, which makes fitting a MERIDA kickstand (or any commercial kickstand) easy. And if you don’t want to have a kickstand and prefer the clean appearance of your frame, the K-MOUNT is neatly tucked away underneath your chainstay, difficult to spot if you don’t know it is there.

Watch Video
IMAGE
Back to overview

CASTED MOTOR BRACKET

The e-bike motor mount has a sophisticated shape that is only possible to create with casting technology. Casting this piece allows us to create a complex yet lightweight shape that gives an extremely strong connection between the motor and the frame for improved performance and reliability. It also gives the bike and motor a smooth and cleanly integrated appearance.

Watch Video
IMAGE
Back to overview

INTERNAL BLOCK

The INTERNAL BLOCK SYSTEM restricts the amount of steering lock that can be applied in either direction, limiting the likelihood of the fork crown hitting the frame downtube and causing damage in a crash. It does this by having a tab mounted in the frame that, along with a special adaptor on the fork, restricts the steering lock in either direction. This is backed up by rubber bumpers on the frame itself, further reducing the chances of the fork and frame being damaged in a crash.

IMAGE
Back to overview

ENERGY GUARD TWIST

A two-component battery cover fitted to bikes with an internally mounted battery. It protects the battery from dirt and moisture, with a softer outer layer that absorbs impacts. An easy-to-use twist lock mechanism secures the cover in place without the need for tools with a simple and light action that makes it easy to access the battery for off-bike charging, but prevents the cover from falling off, even when riding on the roughest terrain.

Watch Video