eSCULTURA 400

 

They can call it cheating if they want to, but if you're riding further and having more fun than ever before, you'll be having the last laugh. Smooth, low drag assistance and natural speed.

Cheating? Not when you're having this much fun. The eSCULTURA 400 brings all the benefits of a pedal-assist motor to a serious road bike, offering up a way to keep up with the pack on the hills without a heavy, draggy feel when you're pedalling above the assistance limit. A 250 Wh battery sits inside the downtube, while the low-drag hub-drive motor works perfectly with Shimano's benchmark 105 groupset and hydraulic disc brakes to deliver a ride that's as sporty as a regular bike.

As even dedicated road riders realise the advantages a little ‘helping hand’ can offer, our eRoad range is spearheaded by this assisted version of our 'classic' SCULTURA. The eSCULTURA is for all the road riders out there who like an active riding style, but are looking for the extra boost to catch up with the bunch and to make the climbs that little bit easier. The MAHLE rear hub motor system gives our eSCULTURA an almost 'non-e-bike' silhouette while delivering natural and almost drag-free pedalling support. You can even use an externally mounted 208 Wh MAHLE Range Extender to boost range. While the eSCULTURA is a dedicated road bike, its comfortable yet sporty geometry and its ample tyre clearance give it real versatility and day-to-day usability.

  • MAHLE ebikemotion X35+ hub motor gives natural feeling assistance
  • Triple butted aluminium frame with built-in 250 Wh battery
  • Efficient, low drag pedalling above assistance limit
  • Sleek 'normal bike' silhouette and low weight
  • Slick Shimano 105 groupset with double chainset
  • material: aluminium
  • 700x45C / 700x42C (with fender) / 27,5x47C max. wheelsize
  • 100x9/135x9mm axle standard
  • BSA bottom bracket standard
frame size XS, S, M, L, XL
color RACE RED (BLACK)
  • MDF09
  • material: carbon
  • 700x40C w/ fender max wheelsize
headset VP MH-P16
  • material: aluminium
  • 400mm (XS/S), 420mm (M/L), 440 (XL)
  • material: aluminium
  • 31.8mm diameter
  • 5° stem angle
  • 80 mm- XXS/XS, 90 mm-S, 100 mm-SM/ML, 110 mm-L/XL
grip MERIDA ROAD EXPERT
derailleur (f) Shimano 105
  • material: carbon
  • 30.9mm diameter
  • 0mm setback
bottom bracket Shimano BSA
pedal VP VPE-891
chain KMC e11s
  • 50-34 teeth
  • 170 mm-XS/S/SM/ML, 175 mm-L/XL
  • 11-32 teeth
  • 11 speed
  • 17mm inner width
  • 22mm height aluminium
  • Tubeless ready (tubeless tape and valves not included)
Bike Frame Geometry Image
Frame Size XS S M L XL
Tire Sizes 28" 28" 28" 28" 28"
St Seat Tubes Mm 470 490 510 530 560
Tt Top Tubes Mm 525 540 555 570 585
Cs Chain Stays Mm 431 431 431 431 431
Hta Head Tube Angles Deg 69.5 70 70.5 71 71.5
Sta Seat Tube Angle Deg 75 75 75 75 75
Bd Bottom Bracket Drops Mm 70 70 70 70 70
Ht Head Tube Lengths Mm 145 160 175 190 205
Fl Fork Lengths Mm 400 400 400 400 400
R Reachs Mm 374 384 395 406 416
S Stacks Mm 565 581 597 613 629
Wb Wheel Base Mm 1032 1044 1055 1066 1076
Sh Stand Over Height Mm 748 767 785 804 830

Technologies

IMAGE
Back to overview

PROLITE 66 TRIPLE BUTTED ALUMINUM

When creating high-end aluminium frames, we use our proven PROLITE 66 (6066) aluminium, as it is incredibly light and durable. In addition, it works exceptionally well with our hydroforming technology, allowing us to create complex shapes, featuring triple butted wall thicknesses, an almost carbon-like appearance and the best possible stiffness-to-weight ratio. While lesser alloys might be cheaper, it is the ideal choice for high-performance bicycle frames.

Watch Video
IMAGE
Back to overview

HFS - HYDRO FORMING SYSTEM

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

Watch Video
IMAGE
Back to overview

X-TAPER HEADTUBE

Steering precision is vital to safe and confident handling, and the X-TAPER HEADTUBE allows us to significantly boost this precision. A larger headset diameter at the bottom paired with a smaller one at the top helps to deal with the strains modern riding and equipment can put on the headtube, all without adding unnecessary weight. It allows tapered forks to be fitted with ease and delivers precise and confidence-inspiring steering.

Watch Video
IMAGE
Back to overview

SMOOTH WELDING

This is a process we use to give a nice flat finish to our welds instead of the scaled, 'stack of coins' effect TIG welded joints often have. The welder uses the welding torch to go over the joint twice, helping to smooth out the filler material. It takes a lot of skill to do this, but it delivers strong and smart-looking frames that have the appearance of a carbon fibre frame at first look.

Watch Video
IMAGE
Back to overview

INTERNAL CABLE ROUTING

On the majority of our frames, we run the gear and brake cables and hoses through the frame. The cables enter and exit the frame through smooth sockets, or we use one of our other systems like SMART ENTRY or WIRE PORT to be routed through. Running the cables inside the frame protects them from the elements, gives a clean and neat look and can offer aerodynamic advantages.

Watch Video
IMAGE
Back to overview

DOWN TUBE EXIT

DOWN TUBE EXIT is a feature seen on some of our frames with internally routed cables. By slightly overlapping the downtube where it connects to the bottom bracket, it leaves a small space that allows cables to exit easily. This means they are easily accessible for routine maintenance or replacement, but it prevents excessive movement and noise that can cause wear and distraction.

Watch Video
IMAGE
Back to overview

F-MOUNT

Being able to turn your bike into an all-weather commuter that has mudguards and other fittings can be a real plus, in particular when riding on wet and perhaps muddy roads and tracks on a regular basis. To make fitting easy, some of our bikes are F-MOUNT equipped. These integrated fittings mounts make adding mudguards fast and simple. Please note that some bikes require model-specific mudguards.

Watch Video
IMAGE
Back to overview

K-MOUNT

When using your bike in an urban environment, where you might not always have the option to use a specific bike stand, a kickstand is an ideal solution to park your bike safely. Some of our bikes come with a neatly integrated K-MOUNT, which makes fitting a MERIDA kickstand (or any commercial kickstand) easy. And if you don’t want to have a kickstand and prefer the clean appearance of your frame, the K-MOUNT is neatly tucked away underneath your chainstay, difficult to spot if you don’t know it is there.

Watch Video
IMAGE
Back to overview

C-MOUNT

Similar to our F-MOUNT, where various fixing points for mudguards are part of the frame offering, the C-MOUNT equipped bikes have the fixing points for a rear rack already integrated, making fitting fast, simple and reliable. The C-MOUNTS are an additional feature that improves the day-to-day versatility by adding loading capacity to your bike, ideal for commuting and shopping trips. Please note that some bikes require model-specific rear racks.

Watch Video
IMAGE
Back to overview

WIRE PORT

MERIDA designed headsets that enable all control cables from the handlebar to enter the frame through the headset cover, creating a clean and uncluttered look, allowing for a lighter, stronger and more aerodynamic frame structure than with conventional cable ports. Depending on the model, the cables are run completely internally (including the bar and stem) or semi-integrated, where the cables enter the frame underneath the stem.

Watch Video