- material: aluminium
- 27,5x2,25" max. wheelsize
- 135x9mm axle standard
- internal
- max. 630 Wh
- Coil
- 80mm suspension travel
- 27,5x2,4" max wheelsize
- 2 piston
- 2 piston
- 30.9mm diameter
- 15mm setback
- 40mm seatpost suspension travel
- V-mount
- incl. MERIDA minitool
- 38 teeth
- Shimano FC-E8000
- 11-46 teeth
- 10 speed
- 20mm inner width
- material: aluminium
- 27.5x2.25"
- wire
- reflecting line
- 27.5x2.25"
- wire
- reflecting line
- 100x9mm width front hub
- 32 spoke holes
- Centerlock
- 135x9mm width rear hub
- 36 spoke holes
- Centerlock
- 60Nm
- 630Wh
- 165 mm

Rammestørrelse | XS | S | M | L | XL |
Dekkstørrelse | 27.5" | 27.5" | 27.5" | 27.5" | 27.5" |
Rammestørrelse cm | 38 | 43 | 48 | 53 | 58 |
ST - Seat Tubes (mm) | 380 | 430 | 480 | 530 | 580 |
TT - Top Tube (mm) | 580 | 595 | 615 | 635 | 655 |
CS - Chain Stays (mm) | 470 | 470 | 470 | 470 | 470 |
HTA - Head Tube Angles (°) | 70 | 70 | 70 | 70 | 70 |
STA - Seat Tube Angle (°) | 73.5 | 73.5 | 73.5 | 73.5 | 73.5 |
BD - Bottom Bracket Drops (mm) | 65 | 65 | 65 | 65 | 65 |
HT - Head Tube Length (mm) | 170 | 175 | 180 | 190 | 200 |
FL - Fork Length (mm) | 476 | 476 | 476 | 476 | 476 |
R - Reach (mm) | 385 | 399 | 417 | 435 | 452 |
S - Stack (mm) | 656 | 661 | 666 | 675 | 685 |
WB - Wheel Base (mm) | 1113 | 1129 | 1149 | 1170 | 1190 |
SH - Stand Over Height (mm) | 403 | 403 | 402 | 402 | 401 |
Number | Item Number | Name | Info | Pieces | Torque NM |
1 | 2300000772 | SCREW | 2 | 4 | |
2 | 2311005167 | DROPOUT | DH-013F (see page 608) | 1 | |
3 | 2258004471 | CABLE GUIDE | 2 | ||
4 | 2300015751 | SCREW | 3 | 12 | |
5 | 2300015762 | SCREW | 3 | 12 | |
6 | 2143003934 | ON /OFF BUTTON | for SHIMANO BATTERY | ||
6.1 | 2143003600 | PLUG | for SIMPLO BATTERY | 1 | |
7 | 2164001900 | ADAPTER | 1 | ||
8 | 2298011142 | SCREW | 4 | 8 | |
9 | 2030000514 | COVER HOLDER | 1 | ||
10 | 2030000525 | COVER HOLDER | 1 | ||
11 | 2160000363 | O-RING | 2 | ||
12 | 2221002481 | BUSHING | 2 | ||
13 | 2300016376 | SCREW | 1 | 6 | |
14 | 2300011810 | SCREW | 3 | 4 | |
15 | 2158003863 | RUBBER LIP | for size XS | 1 | |
15 | 2158003874 | RUBBER LIP | for size S | 1 | |
15 | 2158003885 | RUBBER LIP | for size M | 1 | |
15 | 2158003896 | RUBBER LIP | for size L | 1 | |
15 | 2158003904 | RUBBER LIP | for size XL | 1 | |
16 | 2161002337 | BATTERY COVER | for size XS W SHIMANO BATTERY | 1 | |
16 | 2161002348 | BATTERY COVER | for size S W SHIMANO BATTERY | 1 | |
16 | 2161002359 | BATTERY COVER | for size M W SHIMANO BATTERY | 1 | |
16 | 2161002360 | BATTERY COVER | for size L W SHIMANO BATTERY | 1 | |
16 | 2161002371 | BATTERY COVER | for size XL W SHIMANO BATTERY | 1 | |
16 | 2161002285 | BATTERY COVER | for size XS W SIMPLO BATTERY | 1 | |
16 | 2161002296 | BATTERY COVER | for size S W SIMPLO BATTERY | 1 | |
16 | 2161002304 | BATTERY COVER | for size M W SIMPLO BATTERY | 1 | |
16 | 2161002315 | BATTERY COVER | for size L W SIMPLO BATTERY | 1 | |
16 | 2161002326 | BATTERY COVER | for size XL W SIMPLO BATTERY | 1 | |
17 | 2136002123 | LATCH KEEPER | 1 | ||
18 | 2029000083 | BUMPER | 2 | ||
19 | 2258005386 | CABLE GUIDE | 1 | ||
20 | 2258005397 | CABLE GUIDE | 1 | ||
21 | 2300011768 | SCREW | 2 | 2,5 | |
22 | LATCH | 1 | |||
23 | 2136001371 | BC-MOUNT | 1 | ||
24 | 2292002578 | WASHER | 2 | ||
25 | 2298011283 | SCREW | 2 | 6 | |
26 | 2298011454 | SCREW | 1 | 6 |
Highlights
The eSPRESSO CC is available with the new 'Energy Cradle' frame, where the 745 or 630 Wh battery (depending on model) is housed on top of the downtube, and can be accessed via a removable aluminium battery cover, or as a semi-integrated frame, where the 504 Wh battery is integrated into the lower part of the downtube.
Unique cradle like shaping of the downtube to accommodate the battery, without losing the all important frame stiffness of our low step-through frames. By not adding cutouts to the downtube, we can maintain the outstanding frame stiffness, that prevents our low step-through bikes from wobbling under load. Paired with an aluminium battery cover, the frames give the impression of an integrated battery, without sacrificing stability and battery accessibility. The tapered head tube, the large tube diameters and the forged motor bracket all contribute to achieving a safe and precise riding experience.
The eSPRESSO CC come fully equipped with fenders, kickstand, carrier and lights. Ready for any outing you can think of.
A centrally positioned low centre of gravity, which has been achieved through the positioning of the battery in the lower position of the downtube as well as the location of the Shimano motors, enables to deliver fantastic riding characteristics in any situation which are extremely important in particular in wave low step through frames which have the tendency to chatter and jitter when power is applied.
The decision to use 650B wheels with 2.25" off-road tread pattern for our CC models is not just a design feature but has more practical reasons. To add big volume tyres to an e-bike provides increased comfort but also extra traction and therefore more safety reserves. Small and even bigger bumps can easily be rolled over, and a big volume tyre provides more puncture protection compared to a narrow one.
Kabler/wire trekkes gjennom rammen og gjør sykkelen stilrent og ryddig. Samtidig er kabler/wire ute av luftstrømmen og beskyttes mot fuktighet og smuss.
Den midtmonterte Shimano-motoren, i kombinasjon med smidd motorbrakett, utstyrer eSPRESSO CITY med et av de laveste innstegene i markedet.