eSPRESSO CC 400 EQ

eSPRESSO CC 400 EQ

 

Finn forhandler
  • material: aluminium
  • 27,5x2,25" max. wheelsize
  • 135x9mm axle standard
  • internal
  • max. 630 Wh
Rammestørrelse XS, S, M, L, XL
Farge MATT GREEN (BLACK)
  • Coil
  • 80mm suspension travel
  • 27,5x2,4" max wheelsize
Styrelager MERIDA CAP w/ wire gateway
  • material: aluminium
  • 660mm width
  • 15mm rise
  • material: aluminium
  • 31.8mm diameter
  • adjustable
  • 90 mm- XS/S/M/L/XL
Holker / styretape MERIDA EXPERT TK
Bakre girhendel Shimano Deore M4100
  • 30.9mm diameter
  • 15mm setback
  • 40mm seatpost suspension travel
Sadelklemme MERIDA EXPERT
  • V-mount
  • incl. MERIDA minitool
Pedal VP VPE-891
Kjede KMC e10S EPT
Kjedefører MTK700 SP40
  • 38 teeth
  • Shimano FC-E8000
Kjedekasse Sunnywheel SW-CG-173A
  • 11-46 teeth
  • 10 speed
  • 20mm inner width
  • material: aluminium
  • 27.5x2.25"
  • wire
  • reflecting line
  • 27.5x2.25"
  • wire
  • reflecting line
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 135x9mm width rear hub
  • 36 spoke holes
  • Centerlock
Skjermer Sunnywheel SW-FA-311-65A(MSB)
Eiker Black stainless
lys Herrmans H-Black MR4 E / Spanninga Commuter Glow XE integrated in MERIDA MIK HD carrier
bagasjebrett MERIDA MIK HD Carrier with Spring clip & Spanninga rear light
støtte Atranvelo 1219-PC-7
batterilås Abus Key
display Shimano SC-E5000
rammelås Abus 4650 XL
Bremsestrømpe VLD-880 Foam Black

weighed with 27.5" wheels and at frame size S, without pedals

manual MERIDA
Sykkelramme Geometri Bilde
Rammestørrelse XS S M L XL
Dekkstørrelse 27.5" 27.5" 27.5" 27.5" 27.5"
ST - Seat Tubes (mm) 380 430 480 530 580
TT - Top Tube (mm) 580 595 615 635 655
CS - Chain Stays (mm) 470 470 470 470 470
HTA - Head Tube Angles (°) 70 70 70 70 70
STA - Seat Tube Angle (°) 73.5 73.5 73.5 73.5 73.5
BD - Bottom Bracket Drops (mm) 65 65 65 65 65
HT - Head Tube Length (mm) 170 175 180 190 200
FL - Fork Length (mm) 476 476 476 476 476
R - Reach (mm) 385 399 417 435 452
S - Stack (mm) 656 661 666 675 685
WB - Wheel Base (mm) 1113 1129 1149 1170 1190
SH - Stand Over Height (mm) 403 403 402 402 401
Number Item Number Name Info Pieces Torque NM
1 A2300000004 SCREW M3x0.5 L6mm 2 2~4
2 A2311000072 RD-HANGER DH-013F 1
3 A2258000079 CABLE PLUG for rear brake 1
4 A2300000468 SCREW M8x1.25 L18.5mm 3 11~12
5 A2300000469 SCREW M8x1.25 L23mm 3 11~12
6.1 A2143000126 BUTTON ON-OFF; for SHIMANO batteries 1
6.2 A2143000097 BLIND PLUG for SIMPLO batteries 1
7 A2164000088 MOUNT for lower battery mount 1
8 A2298000143 SCREW M6x1.0 L10mm 4 6~8
9 A2030000016 MOUNT upper; for battery cover 1
10 A2030000017 MOUNT lower; for battery cover 1
11 A2160000012 O-RING OD6mm ID4mm 2
12 A2221000048 BUSHING for battery cover 2
13 A2300000530 BOLT M5x0.8 L39.5mm 1 4~6
14 A2300000231 SCREW M3x0.5 L8mm 3 2~4
15 A2143000153 BLIND PLUG for drive unit screw holes 4
16 A2161000138 COVER for battery; frame size XS 1
16 A2161000139 COVER for battery; frame size S 1
16 A2161000140 COVER for battery; frame size M 1
16 A2161000141 COVER for battery; frame size L 1
16 A2161000142 COVER for battery; frame size XL 1
17 A2136000071 MOUNT for battery cover 1
18 A2029000001 BUMPER for battery cover 2
19 A2134000061 BUTTON for cover lock 1 3.75~4.25
20 A2136000017 MOUNT for bottle cage 1
21 A2292000028 WASHER OD9mm ID5.2mm H3mm 2
22 A2298000154 SCREW M5x0.8 L12mm 2 3~5
23 A2298000158 SCREW M5x0.8 L25mm 1 3~5
24 A2164000065 MOUNT for SIMPLO ON-OFF 1
25 A2300000568 SCREW M3x0.5 L6mm 2 2~4
26 A2300000204 NUT for fender; M6 1
27 A2300000288 SCREW M6x1.0 L18mm 1 10~12
28 A2363000255 PROTECTOR for step through area 1
29 A2191000138 HEAD SET MERDIA/ACROS-ICR TREKKING 1
30 A2161000143 COVER for drive unit; left side 1
31 A2161000144 COVER for drive unit; right side 1
32 A2143000122 CABLE PLUG for front light 1
SMALL PARTS E6100 see pdf file

Noen ganger kan det skje spesifikasjonsendringer for å unngå større forsinkelser på produksjons- og leveringstider.

Vær oppmerksom på at disse endringene kanskje ikke alltid gjenspeiles på produktsider og bilder.

 

Highlights

Unique cradle like shaping of the downtube to accommodate the battery, without losing the all important frame stiffness of our low step-through frames. By not adding cutouts to the downtube, we can maintain the outstanding frame stiffness, that prevents our low step-through bikes from wobbling under load. Paired with an aluminium battery cover, the frames give the impression of an integrated battery, without sacrificing stability and battery accessibility. The tapered head tube, the large tube diameters and the forged motor bracket all contribute to achieving a safe and precise riding experience.

The eSPRESSO CC is available with the new 'Energy Cradle' frame, where the 745 or 630 Wh battery (depending on model) is housed on top of the downtube, and can be accessed via a removable aluminium battery cover, or as a semi-integrated frame, where the 504 Wh battery is integrated into the lower part of the downtube.

The eSPRESSO CC come fully equipped with fenders, kickstand, carrier and lights. Ready for any outing you can think of.

A centrally positioned low centre of gravity, which has been achieved through the positioning of the battery in the lower position of the downtube as well as the location of the Shimano motors, enables to deliver fantastic riding characteristics in any situation which are extremely important in particular in wave low step through frames which have the tendency to chatter and jitter when power is applied.

The decision to use 650B wheels with 2.25" off-road tread pattern for our CC models is not just a design feature but has more practical reasons. To add big volume tyres to an e-bike provides increased comfort but also extra traction and therefore more safety reserves. Small and even bigger bumps can easily be rolled over, and a big volume tyre provides more puncture protection compared to a narrow one.

Kabler/wire trekkes gjennom rammen og gjør sykkelen stilrent og ryddig. Samtidig er kabler/wire ute av luftstrømmen og beskyttes mot fuktighet og smuss.

Den midtmonterte Shimano-motoren, i kombinasjon med smidd motorbrakett, utstyrer eSPRESSO CITY med et av de laveste innstegene i markedet.

Teknologi

IMAGE
Back to overview

HFS - HYDRO FORMING SYSTEM

Rørene settes inn i negative former og en varm løsning med vann og olje presses gjennom under trykk, slik at rørene inntar komplekse former.

Watch Video
IMAGE
Back to overview

X-TAPER HEADTUBE

Ved å bruke et konisk styrerør med 1 1/8"-lager i toppen og 1 1/4" eller 1 1/2" i bunnen, oppnår vi overlegen stivhet og presis og tillitsskapende styring.

Watch Video
IMAGE
Back to overview

SMOOTH WELDING

Doble sveisestrenger som gir rammen et stilrent utseende. Ved første øyekast ser den ut som en karbonramme.

Watch Video
IMAGE
Back to overview

INTERNAL CABLE ROUTING

Kabler/wire er trukket gjennom rammen, og innganger og utganger går gjennom smidige gjennomføringer. Sykkelen ser ryddig ut og kabler/wire er beskyttet mot fuktighet og smuss.

Watch Video
IMAGE
Back to overview

DI2 READY

Sykler/rammer med symbolet Di2 Ready er klargjort for montering av Di2-teknologi med batterifeste i setepinnen eller i gaffelens kronerør.

Watch Video
IMAGE
Back to overview

RACELITE 61 ALUMINIUM

Vi bruker minimum 6061 aluminium. Det vi oppnår, er å kunne lage lettere og mer avanserte rammer. Vi bruker ytterligere en varmebehandling og dobbeltreduserte rør (rør med to forskjellige veggtykkelser) for å lage lette og stive rammer.

Watch Video
IMAGE
Back to overview

F-MOUNT

Sykler som er utstyrt med F-feste har integrerte festepunkter for skjermer (noen sykler må ha modellspesifikke skjermer), og det gjør monteringen rask, enkel.

Watch Video
IMAGE
Back to overview

K-MOUNT DROP-OUT

Integrert feste på kjedestag som passer til MERIDA støtte (og andre støtter på markedet).

Watch Video
IMAGE
Back to overview

C-MOUNT

Sykler som er utstyrt med C-feste har et allerede integrert festepunktet for bagasjebrett bak (noen sykler må ha modellspesifikke bagasjebrett bak), og det gjør monteringen rask, enkel og pålitelig. 

Watch Video
IMAGE
Back to overview

CASTING MOTOR BRACKET

Avansert formgivning, som kun er mulig takket være vår støpeteknologi, skaper et integrert uttrykk og en ekstremt sterk sammenføyning mellom elsykkelens motor og ramme, noe som gir bedre ytelser og pålitelighet.

Watch Video
IMAGE
Back to overview

ENERGY CRADLE

Our ENERGY CRADLE is a unique cradle-like shaping of the downtube that allows the battery to sit into the downtube in a specifically shaped recess, without adding any cut-outs to the downtube. Paired with an aluminium battery cover, the frame gives the impression of an integrated battery but offers a much stiffer structure for improved handling on our low-step-through frames, without sacrificing battery accessibility.

Watch Video
IMAGE
Back to overview

WIRE PORT

MERIDA designed headsets that enable all control cables from the handlebar to enter the frame through the headset cover, creating a clean and uncluttered look, allowing for a lighter, stronger and more aerodynamic frame structure than with conventional cable ports. Depending on the model, the cables are run completely internally (including the bar and stem) or semi-integrated, where the cables enter the frame underneath the stem.

Watch Video