eSPRESSO CITY 300 SE EQ

  • material: aluminium
  • 700x 42C (with fender) wheelsize
  • 142x12mm axle standard
  • external
  • max. 504 Wh
frame size XS, S, M, L, XL
  • Coil
  • 63mm suspension travel
  • 700x48C max wheelsize
display Shimano SC-E5000
speed sensor Shimano SM-DUE10
  • 20mm inner width
  • material: aluminium
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 142x12mm width rear hub
  • 36 spoke holes
  • Centerlock
  • 622-47
  • wire
  • reflecting line
  • 622-47
  • wire
  • reflecting line
  • including removeable lever, 6mm allen key
  • 38 teeth
  • Shimano FC-E5010
  • 11-36 teeth
  • 9 speed
chain KMC e9S
shifters Shimano Altus rapidfire
  • 180 mm
  • 160 mm
headset MERIDA 2346 Neck
  • material: aluminium
  • 31.8mm diameter
  • adjustable
  • 90 mm-XS/S/M, 110 mm-L/XL
stem size 90 mm-XS/S/M, 110 mm-L/XL
  • material: aluminium
  • 640mm width
  • 35mm rise
grip MERIDA EXPERT TK
  • 30.9mm diameter
  • 15mm setback
  • 40mm seatpost suspension travel
seat clamp MERIDA EXPERT
lights Herrmans H-Black MR4 E / Herrmans H-Cargo integrated in MERIDA MIK carrier
frame lock Abus 5650 LH-3 lock
carrier MERIDA MIK Carrier with Spring clip & Herrmans rear light
mudguard Sunnywheel SW-FA311-60E1 (MSB)
kickstand Massload CL-KA98
pedal VP VPE-891
Bike Frame Geometry Image
Frame Size XS S M L XL
Tyre Sizes 28" 28" 28" 28" 28"
Frame Size cm 42 45 49 53 57
St Seat Tubes mm 415 450 490 530 570
Tt Top Tubes mm 575 590 605 620 635
Cs Chain Stays mm 490 490 490 490 490
HTA head tube angle [°] 69.5 70 70 70.5 70.5
STA seat tube angle [°] 74 73.5 73 73 72.5
Bd Bottom Bracket Drops mm 70 70 70 70 70
Ht Head Tube Lengths mm 160 170 185 200 215
Fl Fork Lengths mm 477 477 477 477 477
R Reach mm 389 394 398 408 412
S Stacks mm 651 662 676 693 707
Wb Wheel Base mm 1140 1143 1153 1163 1171
Sh Stand Over Height mm 378 379 379 380 380

Technology

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

IMAGE

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.