eSPRESSO CITY 300 SE EQ

eSPRESSO CITY 300 SE EQ

 

Contact Local Shop
  • material: aluminium
  • 700x 42C (with fender) wheelsize
  • 142x12mm axle standard
  • external
  • max. 504 Wh
frame size XS, S, M, L, XL
  • Coil
  • 63mm suspension travel
  • 700x48C max wheelsize
display Shimano SC-E5000
speed sensor Shimano SM-DUE10
  • 20mm inner width
  • material: aluminium
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 142x12mm width rear hub
  • 36 spoke holes
  • Centerlock
  • 622-47
  • wire
  • reflecting line
  • 622-47
  • wire
  • reflecting line
  • including removeable lever, 6mm allen key
  • 38 teeth
  • Shimano FC-E5010
  • 11-36 teeth
  • 9 speed
chain KMC e9S
shifters Shimano Altus rapidfire
  • 180 mm
  • 160 mm
headset MERIDA 2346 Neck
  • material: aluminium
  • 31.8mm diameter
  • adjustable
  • 90 mm-XS/S/M, 110 mm-L/XL
stem size 90 mm-XS/S/M, 110 mm-L/XL
  • material: aluminium
  • 640mm width
  • 35mm rise
grip MERIDA EXPERT TK
  • 30.9mm diameter
  • 15mm setback
  • 40mm seatpost suspension travel
seat clamp MERIDA EXPERT
lights Herrmans H-Black MR4 E / Herrmans H-Cargo integrated in MERIDA MIK carrier
frame lock Abus 5650 LH-3 lock
kickstand Massload CL-KA98
mudguard Sunnywheel SW-FA311-60E1 (MSB)
carrier MERIDA MIK Carrier with Spring clip & Herrmans rear light
pedal VP VPE-891
Bike Frame Geometry Image
Frame Size XS S M L XL
Tyre Sizes 28" 28" 28" 28" 28"
St Seat Tubes mm 415 450 490 530 570
Tt Top Tubes mm 575 590 605 620 635
Cs Chain Stays mm 490 490 490 490 490
HTA head tube angle [°] 69.5 70 70 70.5 70.5
STA seat tube angle [°] 74 73.5 73 73 72.5
Bd Bottom Bracket Drops mm 70 70 70 70 70
Ht Head Tube Lengths mm 160 170 185 200 215
Fl Fork Lengths mm 477 477 477 477 477
R Reach mm 389 394 398 408 412
S Stacks mm 651 662 676 693 707
Wb Wheel Base mm 1140 1143 1153 1163 1171
Sh Stand Over Height mm 378 379 379 380 380
No. Item-No. Name Info Pieces Torque NM
1 A2161000027 COVER for battery; right side 1
2 A2161000028 COVER for battery; left side 1
3 A2300000317 SCREW self-cutting L20mm 2 3~5
4 A2143000080 BLIND PLUG for left side battery cover 1
5 A2300000468 SCREW M8x1.25 L18.5mm 3 11~12
6 A2300000469 SCREW M8x1.25 L23mm 3 11~12
7 A2258000099 CABLE PLUG for rear brake and speed sensor 1
8 A2300000129 SCREW M3x0.5 L10mm 2 2~4
9 A2300000536 SCREW M4x0.7 L8mm 1 3~5
10 A2311000067 RD-HANGER DH-057 1
11 A2300000213 SCREW M3x0.5 L13.5mm 2 2~4
12 CABLE GUIDE SMART ENTRY 1
13 CABLE GUIDE SMART ENTRY 1
14 A2143000076 COVER for carrier mount 2
15 A2298000142 SCREW M6x1.0 L12mm 2 6~8
16 A2298000120 SCREW M5x0.8 L12mm 1 3~5
17 A2002000118 THRU AXLE COMP TR; L172mm M12x1.5 TL14mm incl. nut 1
18 A2298000071 SCREW M5x0.8 L15mm with washer 2 3~5

To reduce production and delivery times, we are sometimes forced to make last-minute specification changes. Please be aware that those changes might not be reflected on these product pages and images.

 

Technology

IMAGE
Back to overview

PROLITE 66 TRIPLE BUTTED ALUMINUM

When creating high-end aluminium frames, we use our proven PROLITE 66 (6066) aluminium, as it is incredibly light and durable. In addition, it works exceptionally well with our hydroforming technology, allowing us to create complex shapes, featuring triple butted wall thicknesses, an almost carbon-like appearance and the best possible stiffness-to-weight ratio. While lesser alloys might be cheaper, it is the ideal choice for high-performance bicycle frames.

Watch Video
IMAGE
Back to overview

HFS - HYDRO FORMING SYSTEM

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

Watch Video
IMAGE
Back to overview

X-TAPER HEADTUBE

Steering precision is vital to safe and confident handling, and the X-TAPER HEADTUBE allows us to significantly boost this precision. A larger headset diameter at the bottom paired with a smaller one at the top helps to deal with the strains modern riding and equipment can put on the headtube, all without adding unnecessary weight. It allows tapered forks to be fitted with ease and delivers precise and confidence-inspiring steering.

Watch Video
IMAGE
Back to overview

SMOOTH WELDING

This is a process we use to give a nice flat finish to our welds instead of the scaled, 'stack of coins' effect TIG welded joints often have. The welder uses the welding torch to go over the joint twice, helping to smooth out the filler material. It takes a lot of skill to do this, but it delivers strong and smart-looking frames that have the appearance of a carbon fibre frame at first look.

Watch Video
IMAGE
Back to overview

INTERNAL CABLE ROUTING

On the majority of our frames, we run the gear and brake cables and hoses through the frame. The cables enter and exit the frame through smooth sockets, or we use one of our other systems like SMART ENTRY or WIRE PORT to be routed through. Running the cables inside the frame protects them from the elements, gives a clean and neat look and can offer aerodynamic advantages.

Watch Video
IMAGE
Back to overview

SMART ENTRY

Many of our frames offer internal cable routing, where the gear and brake cables are run through the frame for maximum protection and a clean look. Some internally run cables can rattle when riding over uneven surfaces, but our SMART ENTRY system prevents this from happening. Cables, housings and brake hoses are clamped under tension to prevent noisy cable movement. All inlets are completely interchangeable to deal with any kind of cable or wire.

Watch Video
IMAGE
Back to overview

DI2 READY

Shimano's Di2 electronic shifting system offers fast, smooth and reliable shifting. In particular, in the road world, it has proven itself as the primary choice when top performance is at the top of the agenda. With that in mind, we have a broad selection of performance road frames that are Di2 READY and can accommodate the electrical cable, battery and other little tweaks that the system requires.

Watch Video
IMAGE
Back to overview

F-MOUNT

Being able to turn your bike into an all-weather commuter that has mudguards and other fittings can be a real plus, in particular when riding on wet and perhaps muddy roads and tracks on a regular basis. To make fitting easy, some of our bikes are F-MOUNT equipped. These integrated fittings mounts make adding mudguards fast and simple. Please note that some bikes require model-specific mudguards.

Watch Video
IMAGE
Back to overview

K-MOUNT

Integrated mount on the chainstay to fit a Merida kickstand (or any commercial kickstand).

Watch Video
IMAGE
Back to overview

C-MOUNT

Similar to our F-MOUNT, where various fixing points for mudguards are part of the frame offering, the C-MOUNT equipped bikes have the fixing points for a rear rack already integrated, making fitting fast, simple and reliable. The C-MOUNTS are an additional feature that improves the day-to-day versatility by adding loading capacity to your bike, ideal for commuting and shopping trips. Please note that some bikes require model-specific rear racks.

Watch Video