Frame Size	XS	S	M	L	XL
Tyre Sizes	28"	28"	28"	28"	28"
St Seat Tubes mm	415	450	490	530	570
Tt Top Tubes mm	575	590	605	620	635
Cs Chain Stays mm	490	490	490	490	490
HTA head tube angle [°]	69.5	70	70	70.5	70.5
STA seat tube angle [°]	74	73.5	73	73	72.5
Bd Bottom Bracket Drops mm	70	70	70	70	70
Ht Head Tube Lengths mm	160	170	185	200	215
Fl Fork Lengths mm	477	477	477	477	477
R Reach mm	389	394	398	408	412
S Stacks mm	651	662	676	693	707
Wb Wheel Base mm	1140	1143	1153	1163	1171
Sh Stand Over Height mm	378	379	379	380	380

To reduce production and delivery times, we are sometimes forced to make last-minute specification changes. Please be aware that those changes might not be reflected on these product pages and images.

Technology

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

K-MOUNT

Integrated mount on the chainstay to fit a Merida kickstand (or any commercial kickstand).

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.

eSPRESSO CITY 300 SE EQ