• material: aluminum
  • 29 wheelsize
  • 135x9mm axle standard
  • BSA bottom bracket standard
  • Smooth welding
frame size S, M, L, XL, XXL
color SILK FOG GREEN (RED)
  • Air
  • 100mm suspension travel
  • Tapered
  • Remote lockout
  • 51mm fork offset
headset MERIDA M2331
  • material: aluminium
  • 720mm width
  • flat
  • material: aluminium
  • 31.8mm diameter
  • 6° stem angle
  • S-70 mm, M-80 mm, L-90 mm, XL-100 mm, XXL-110 mm
grip MERIDA COMP EC
derailleur (r) Shimano XT M8100 Shadow+
shifter rear Shimano XT
  • material: aluminium
  • 30.9mm diameter
  • 0mm setback
seat clamp MERIDA COMP QR
saddle MERIDA COMP CC
pedal VP VPE-891
chain Shimano SLX
  • 32 teeth
  • 170 mm-S, 175 mm-M up
crank size 170 mm-S, 175 mm-M up
  • 10-51 teeth
  • 12 speed
bottom braket Shimano BB-MT800
  • 22.8mm inner width
  • material: aluminium
  • Tubeless ready (tubeless tape and valves not included)
  • 110x15mm width front hub
  • 32 spoke holes
  • Centerlock
  • 148x12mm width rear hub, 32 spoke holes
  • Centerlock
spokes Double Butted Black stainless

weighed at frame size M and 29" wheels without pedals

Bike Frame Geometry Image
Frame Size S M L XL XXL
Tire Sizes 29" 29" 29" 29" 29"
Frame Size CM 37 43 47 51 56
ST seat tube [mm] 370 430 470 510 560
TT top tube [mm] 570 590 610 630 650
CS chain stay length [mm] 440 440 440 440 440
HTA head tube angle [°] 70 70 70 70 70
STA seat tube angle [°] 73 73 73 73 73
BD bottom bracked drop [mm] 60 60 60 60 60
HT head tube [mm] 100 115 130 145 160
FL fork length [mm] 506 506 506 506 506
R reach [mm] 382 398 414 429 445
S stack [mm] 614 628 642 656 670
WB wheel base [mm] 1069 1090 1110 1131 1152
SH stand over height [mm] 679 727 763 800 843
Body Height Cm < 173 167 - 183 177 - 190 187 - 196 > 192

Technologies

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

DOWN TUBE EXIT

Ensures that internally routed cables and wires can’t move freely and remain easily accessible for servicing.

IMAGE

RACELITE 61 ALUMINIUM

We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.

IMAGE

TFS - TECHNO FORMING SYSTEM

Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core. 

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.