• material: aluminium
  • 27.5 wheelsize
  • 135x9mm axle standard
  • BSA bottom bracket standard
frame size XS, S, M, L
color GLOSSY TEAL (SILVER-GREEN/BLACK)
  • Coil
  • 100mm suspension travel
  • Lockout
  • 46mm fork offset
headset MERIDA M44PSE neck
  • material: aluminium
  • 660mm width
  • 25mm rise
  • material: aluminium
  • 31.8mm diameter
  • 15° stem angle
  • XS/S/M-80 mm, L-90 mm
grip MERIDA COMP EC
derailleur (f) Shimano M3000
derailleur (r) Shimano Alivio
shifter front Shimano Altus
shifter rear Shimano Altus
  • material: aluminium
  • 27.2mm diameter
  • 12mm setback
seat clamp MERIDA COMP QR
saddle MERIDA COMP CC
pedal VP VPE-891
chain KMC M99
  • 40-30-22 teeth
  • 170 mm-XS, 175 mm-M up
crank size 170 mm-XS, 175 mm-M up
  • 11-36 teeth
  • 9 speed
bottom braket Shimano UN100 BSA
  • 20mm inner width
  • material: aluminium
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 135x9mm width rear hub
  • 32 spoke holes
  • Centerlock
spokes Black stainless

weighed at frame size S and 27.5" wheels without pedals

Bike Frame Geometry Image
Frame Size XS S M L
Frame Size CM 34 38 43 47
ST seat tube [mm] 343 381 432 470
TT top tube [mm] 550 560 575 585
CS chain stay length [mm] 430 430 430 430
HTA head tube angle [°] 69.5 69.5 70 70
STA seat tube angle [°] 74.5 74.5 74.5 74.5
BD bottom bracked drop [mm] 63 63 63 63
HT head tube [mm] 95 100 105 115
FL fork length [mm] 493 493 493 493
R reach [mm] 384 392 405 413
S stack [mm] 600 605 612 621
WB wheel base [mm] 1051 1062 1072 1083

CATEGORY HIGHLIGHTS

6061 double butted and technoformed aluminium frame a with more relaxed geometry. Comes equipped with internal cable routing as well as F, C and K-mounts.

A more compact top tube, paired with a higher front end, provide the MATTS with a more upright riding position, delivery extra riding comfort for the rider as well as a better view of what lies ahead. 

Aluminium welding is the strong point of our factories. 47 years of production knowledge and experience go into every frame we make. The MATTS is one of the most long-standing bike categories in our history and is proud to carry the name MERIDA.

All models in the MATTS family (with the exception of the 10-V) feature powerful and easy to modulate hydraulic disc brakes. Hydraulic disc brakes offer great stopping power in any weather, are more or less maintenance free and are not affected by rough or kinked cables.

Our MATTS offer either 650B or 26" wheels, depending on model and frame size. The top models of the MATTS line-up feature fast rolling 650B wheels, while the middle range offers the smaller models with easy to accelerate 26" wheels. The MATTS 10-V entry model comes with 26" wheels throughout all frame sizes. 

The MATTS frames have bosses and fixture points to attach a water bottle cage, rear fenders, a rear rack and a kickstand, making it super versatile if and when it gets used as a commuter or more urban-focused bike. 

Cables are routed through the frame to keep the look of the bike neat and uncluttered, whilst the cables are out of the airflow and protected from moisture and dirt.

Technologies

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

DOWN TUBE EXIT

Ensures that internally routed cables and wires can’t move freely and remain easily accessible for servicing.

IMAGE

RACELITE 61 ALUMINIUM

We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.

IMAGE

TFS - TECHNO FORMING SYSTEM

Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core. 

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.