• material: aluminium
  • 29" wheelsize
  • 135x9mm axle standard
  • BSA bottom bracket standard
frame size S, M, L, XL, XXL
color GLOSSY SPARKLING RED (ORANGE)
  • Coil
  • 100mm suspension travel
  • remote lockout
brake front Shimano MT-200
brake rear Shimano MT-200
brake lever Shimano MT-200
  • AL cap with STS bolt+ ST stop nut
  • material: aluminium
  • 690mm width
  • 15mm rise
  • material: aluminium
  • 31.8mm diameter
  • 6° stem angle
  • 70 mm-S, 80 mm-M, 90 mm-L, 100 mm-XL, 110 mm-XXL
grip MERIDA EC
derailleur (f) Shimano Deore
derailleur (r) Shimano XT shadow
shifter front Shimano Deore
shifter rear Shimano Deore
  • material: aluminium
  • 30.9mm diameter
  • 15mm setback
seat clamp MERIDA COMP QR
pedal VP VPE-891
chain KMC X10
  • 36-22 teeth
  • 170 mm-S, 175 mm-M/XXL
crank size 170 mm-S, 175 mm-M/XXL
  • 11-36 teeth
  • 10 speed
  • 17mm inner width
  • material: aluminium
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 135x9mm width rear hub
  • 32 spoke holes
  • Centerlock
spokes Black stainless

weighed at frame size M and 29" wheels without pedals

Bike Frame Geometry Image
Frame Size S M L XL XXL
Tire Sizes 29" 29" 29" 29" 29"
Frame Size CM 37 43 47 51 56
ST seat tube [mm] 370 430 470 510 560
TT top tube [mm] 570 590 610 630 650
CS chain stay length [mm] 445 445 445 445 445
HTA head tube angle [°] 70 70 70 70 70
STA seat tube angle [°] 73 73 73 73 73
BD bottom bracked drop [mm] 60 60 60 60 60
HT head tube [mm] 100 115 130 145 160
FL fork length [mm] 506 506 506 506 506
R reach [mm] 382 398 414 429 445
S stack [mm] 614 628 642 656 670
WB wheel base [mm] 1074 1095 1115 1136 1157
SH stand over height [mm] 687 739 775 809 851
Body Height Cm < 173 167 - 183 177 - 190 187 - 196 > 192

Technologies

IMAGE

RACELITE 61 ALUMINIUM

We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.

IMAGE

TFS - TECHNO FORMING SYSTEM

Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core. 

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.