• material: carbon
  • 700C wheelsize
  • 100x12/ 142x12mm axle standard
  • BB86 bottom bracket standard
frame size XS, S, M, L, XL
color SILK SILVER/BLACK (RED)
fork MISSION CX CF3
brake lever Sram Apex 1 HRD
headset VP-B303AC Neck
  • material: aluminium
  • material: aluminium
  • 31.8mm diameter
  • -5° stem angle
  • 80 mm-XS/S, 90 mm-M/L, 100 mm-XL
grip MERIDA ROAD EXPERT
derailleur (r) Sram Apex1
shifter rear Sram Apex 1 HRD
  • material: carbon
  • 27.2mm diameter
  • 15mm setback
seat clamp MERIDA Expert
saddle MERIDA EXPERT CC
chain KMC X11
  • 40 teeth
  • 170 mm-XS/S, 172.5 mm-M, 175 mm-L/XL
crank size 170 mm-XS/S, 172.5 mm-M, 175 mm-L/XL
  • 11-42 teeth
  • 11 speed
bottom braket Sram Pressfit PF86
  • 19mm inner width
  • 24mm height
  • 700x33C
  • fold
  • tubless compatible
  • 700x33C
  • fold
  • tubless compatible
  • 100x12mm width front hub
  • 28 spoke holes
  • 6 bolt
  • 142x12mm width rear hub
  • 28 spoke holes
  • 6 bolt
axle front Fulchee FH1200BK001 12-100
axle rear Fulchee FH1700BK002 12-142
spokes Black stainless

weighed at frame size M without pedals

Bike Frame Geometry Image
Frame Size XS S M L XL
Tire Sizes 28" 28" 28" 28" 28"
Frame Size CM 47 50 53 56 59
ST seat tube [mm] 470 500 530 560 590
TT top tube [mm] 520 535 550 565 580
CS chain stay length [mm] 423 423 423 423 423
HTA head tube angle [°] 70.75 71 71.75 72 72.25
STA seat tube angle [°] 74 74 74 74 74
BD bottom bracked drop [mm] 68 68 68 68 68
HT head tube [mm] 90 109 125 144 163
FL fork length [mm] 400 400 400 400 400
R reach [mm] 373 382 392 401 411
S stack [mm] 514 533 553 572 591
WB wheel base [mm] 999 1013 1016 1029 1042
SH stand over height [mm] 787 815 842 870 894
Body Height Cm < 167 165 - 177 173 - 185 181 - 192 > 188

CATEGORY HIGHLIGHTS

Our new MISSION CX has managed to get an incredible amount of press since its launch date. Besides being awarded the 2019 Design & Innovation Award, it was also rated highly by BIKERUMOR, GRAN FONDO, RCUK, Road CC and IMB.

Carbon frame with carbon dropouts. ‘Nano Matrix’ for extra impact resistance, Tapered head tube and 142x12 mm rear through axle provide stiffness and steering precision. ‘Smart Entry’ Internal cable routing, removable seat stay bridge and mudguard mounts. The flat mount rear caliper is mounted on the chainstay which is better for dissipating braking forces but also keeps it protected inside the rear triangle.

All MISSION CX models feature a full carbon tapered fork with a 12 mm bolt through axle. The bolt through improves stiffness for the axle, whilst the tapered carbon steerer increases vertical stiffness, providing very precise steering and enhanced confidence in corners.

All MISSION CX and CYCLO CROSS models are equipped with disc brakes, providing high-performance braking isolated from the weather and muddy conditions due to their location at the wheel's hub/centre. The new MISSION CX models now feature flat mount brake standard for a neat and flush positioning of the brake caliper.

All performance DISC road bikes feature 12 mm bolt through axles for greater wheel stiffness and precise disc alignment when replacing wheels. CF4 models use the R.A.T system, super fast to open and close.

All our MISSION models have the ability to add mudguards, making them more versatile, particularly when used as a training or commuting bike. The removable seat stay bridge (not available on aluminium models) stays in place to securely hold the rear mudguard or gets removed for a cleaner look and improved mud clearance.

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails and roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

Technologies

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

IMAGE

NANO MATRIX CARBON

To protect the integrity of carbon frames, the fibres are bonded together with an epoxy resin with added nano particles, increasing impact resistance by up to 40%.

IMAGE

AWS

When creating the individual carbon elements, an inflatable bladder is used to ensure there are no wrinkles inside the tube as these can add weight and create weakness. This results in a lighter, stiffer and stronger frame.

IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

IMAGE

REMOVABLE F-MOUNT

A removable seat stay bridge can be fitted for neater and more secure fitting of rear fenders, but removed for increased mud clearance and a cleaner look.