MATTS J. TEAM

 

frame BIG.SEVEN TFS JR
frame size 11.5"
color MATT-BLACK (GREEN/WHITE)
  • Air
  • 100mm suspension travel
  • Lockout
brake front Promax DSK-926 disc
brake rear Promax DSK-926 disc
headset MERIDA M2346 Neck15
  • 620mm width
  • 0mm rise
  • 31.8mm diameter
  • 6° stem angle
grip MERIDA EC
derailleur rear Sram NX 1x11 X-Horizon
shifter rear Sram NX 11
  • 27.2mm diameter
  • 15mm setback
seat clamp MERIDA Comp QR
saddle MERIDA Junior Comfort
  • VPE-891
chain KMC X11-1
  • 11-42 teeth
  • 11 speed
bottom braket Sram Power Spline
rim MERIDA JR
  • 26x1.95"
  • wire bead
  • 26x1.95"
  • wire bead
  • 100x9mm width front hub
  • 24 spoke holes
  • 6 bolt
  • 135x9mm width rear hub
  • 24 spoke holes
  • 6 bolt
spokes Black steel

weighed at medium size

Bike Frame Geometry Image
Frame Size 11.5"
Tire Sizes 26"
Frame Size Inch 11.5
Frame Size Cm 34
ST seat tube [mm] 343
TT top tube [mm] 555
CS chain stay length [mm] 430
HTA head tube angle [°] 70.5
STA seat tube angle [°] 73.5
BD bottom bracked drop [mm] 45
HT head tube [mm] 95
FL fork length [mm] 490
R reach [mm] 383
S stack [mm] 582
WB wheel base [mm] 1045
SH stand over height [mm] 644(26)

Highlights

Durable aluminium frame with internal cable routing and replaceable dropout hanger. Able to take 26" or 650B wheels. Equipped with mounts for rack, mudguards and kickstand.

These models are built around a very small adult frame with 26" wheels. As the child grows, the wheels can be swapped for 650B wheels, meaning the bike will fit your child for longer.

Many of our bikes feature rigid forks. This helps to keep the weight down, which is a big advantage for much lighter riders. Gears are also kept to a minimum, avoiding confusion for young riders, again reducing weight.

All kids’ bike frames are made with the same 6061 lightweight aluminium we use in our adult bikes, we don’t cut any corners. They’re also painted and lacquered in the same way, so the bikes can still look great even after a few tough knocks.

Technologies

IMAGE

RACELITE 61 ALUMINIUM

We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.