|Fork||Manitou Mattoc Comp Dorado Air 27-150 taper 15|
|Shock||FLOAT DPS Performance|
|Derailleur Rear||Sram NX 11|
|Shifters||Sram NX 11|
|Brake Lever||Srame Level T|
|Brakes||Sram Level T 180|
|Chainwheel||Sram NX XSYNC 30 STEEL|
|Hubs||FoBearing disc 15 / FoBearing disc 12 XD|
|Rim||MERIDA Expert TR|
|Freewheel||Sram XG-1150-A1 10-42|
|Tires||Maxxis DHR II 2.3 TR EXO / Maxxis Forekaster 2.35 TR EXO|
|Handlebar Stem||MERIDA Expert TR 35|
|Handlebar||MERIDA EXPERT 35 760|
|Headset||Big Conoid semi neck|
|Seat Post||MERIDA EXPERT Dropper 30.9|
|Top Tube (TT)||560||595||625||650|
|Seat Tube (ST)||390||440||480||530|
|Chain Stays (CS)||445||445||445||445|
|Head Tube Angle (HTA)||67||67||67||67|
|Seat Tube Angle (STA)||74||74||74||74|
|Bottom Bracket Drop (BD)||18||18||18||18|
|Head Tube (HT)||100||110||120||130|
|Fork Length (FO)||540||540||540||540|
|Wheel Base (WB)||1121||1157||1188||1215|
|Stand Over Height (SH)||707||748||778||805|
The best of two worlds: externally shaped head tube with bigger diameter at the bottom and weight saving smaller diameter at the top. ‘X-Taper Headtubes’ always come with tapered forks or correct adapters fitted. Result: superb stiffness and precise steering even in the toughest conditions without increasing the weight of the frame unnecessarily.
Thru-axles at the front and/or rear wheel offer various advantages: besides their high torsional stiffness, they especially ensure easy wheel installation and also guarantee an always correct position of the brake rotor. Because in contrast to quick-release solutions, the position of the wheel is always 100 percent the same. MERIDA trusts in 12 mm thru-axles in the rear and 15 mm versions in the front.
Due to a large cable exit in the down tube, “Down Tube Exit” additionally puts an end to awkward handling of internally routed cables.
Rear suspension often causes problems with the rear shifting cable (e.g. formation of loops, abrasion/friction, undesired shifting) which are caused by movement during compression. Thanks to a double break via special sleeves (“Double Stop”), MERIDA keeps the defined cable length constant.
Elaborately shaped frame designs with special inlets and outlets for internally routed brake and/or shifter cables. “Clean” in a double sense: The bike looks uncluttered while the cables are protected effectively from moisture and dirt.
Besides top functionality, MERIDA frames also have to offer a convincing visual appearance. The second welding process during Smooth Welding evens the connecting welding seam – an elaborate concept for a brilliant look without compromises to stability.
MERIDA’s premium alloy represents extremely durable and light aluminium of high-end quality. Triple-butted wall thicknesses result not only in exciting frame designs: First of all, they offer an optimum Stiffness-to-Weight (STW) ratio.
The mechanical TFS process works from the outside to the inside. In contrast, the complex Hydroforming concept shapes the frame by pushing hot oil under hydraulic high pressure from the inside to the outside. Material: Prolite 66 aluminium.
The friction-free alignment of the brake calliper is considerably eased by direct mounting of the post-mount calliper at the rear dropout. Adaptable to different brake disc sizes thanks to the utilization of differently dimensioned adapters.