One-Eighty 6. 900
|Color||petrol blue (white/yellow)|
|Fork||Manitou Mattoc 15mm 170 taper|
|Shock||RS Vivid Air|
|Derailleur Rear||Sram X1 11s|
|Shifters||NO / SL TRIGGER X0 11SPD RR|
|Brakes||Shimano Zee 203 disc / Shimano Zee 180 disc|
|Chainwheel||FSA Afterburner 32T 11s|
|Chain||KMC X11 11s|
|Hubs||DT Swiss 370 15 disc / DT Swiss 370-11s disc|
|Rim||DT Swiss 533D-26|
|Freewheel||Sram X11s 10-42|
|Tires||Schwalbe Hans Dampf 26 2.35 TSC / Schwalbe Rock Razor 26 2.35 PSC|
|Handlebar Stem||Gravity LIGHT L:45|
|Handlebar||Gravity light OS 760 R25|
|Headset||Big Conoid A-bearing neck|
|Seat Post||Rock Shox Reverb Stealth 31.6|
|Top Tube (TT)||555||575||595|
|Seat Tube (ST)||400||400||430|
|Chain Stays (CS)||435||435||435|
|Head Tube Angle (HTA)||64.5||64.5||64.5|
|Seat Tube Angle (STA)||74||74||74|
|Bottom Bracket Drop (BD)||10||10||10|
|Head Tube (HT)||120||120||120|
|Fork Length (FO)||568||568||568|
|Wheel Base (WB)||1166||1186||1209|
|Stand Over Height (SH)||731||728||750|
External butted head-tube with huge dimensioned 1.5” lower head-set and matching taper-steerer fork.
12mm thru-axle with 142 drop-out width: Increased stiffness and perfect disc-rotor position, no tools required for wheel disassembling.
Due to a large cable exit in the down tube, “Down Tube Exit” additionally puts an end to awkward handling of internally routed cables.
Rear suspension often causes problems with the rear shifting cable (e.g. formation of loops, abrasion/friction, undesired shifting) which are caused by movement during compression. Thanks to a double break via special sleeves (“Double Stop”), MERIDA keeps the defined cable length constant.
MERIDA’s in-house “Virtual Pivot Kinematics” is a suspension chassis with a virtual pivot point. You will find VPK in the mountain bike models ONE-FORTY and ONE-SIXTY where it ensures that the bikes of the 145 and 160 and travel category combine outstanding small bump sensitivity, big hit capability and convincing drivetrain and braking neutrality in every imaginable situation.
Brake or shifting-cables routed internally through the frame’s tubes. Clean and improved outlook, wi
Smoothened welding line by using specific welding technology - improved outlook, without any weakening of the welding structure.
Device to lock the suspension (fork and/or rear-shock) through switching a lever, being located directly at the fork-crown or shock.
MERIDA's Top-Alloy made of 6066 high-strength aluminum, with triple butted walls.
Through an delicate, hydraulic forced forming process 3-dimensional shaped tubes made of Prolite 66
Direct assembling of the disc-caliper at the frame’s rear drop-out – simplified adjustment of the caliper.