JULIET 7. 600
|Fork||Manitou Markhor Comp, Air, 100mm suspension travel, Remote lockout|
|Derailleur Rear||Sram NX Eagle|
|Shifters||no / Sram NX Eagle|
|Brake Lever||Shimano MT-200|
|Chainwheel||Sram NX Eagle, 32 teeth|
|Chain||Sram NX Eagle|
|Hubs||Shimano MT400-B, 110x15mm width, 32 spoke holes, Centerlock / Shimano M4050, 135x9mm width, 32 spoke holes, Centerlock|
|Rim||MERIDA Comp CC, 20mm inner width|
|Freewheel||Sram NX 1230 Eagle, 11-50 teeth, 12 speed|
|Tires||Maxxis Ikon, 27.5x2.2", fold|
|Handlebar Stem||MERIDA Comp CC, 31.8mm diameter, 17° stem angle|
|Handlebar||MERIDA Comp CC, 640mm width, 25mm rise|
|Headset||MERIDA M44PSE neck, 2191026757|
|Seat Post||MERIDA Comp CC, 27.2mm diameter, 12mm setback|
|Saddle||MERIDA Juliet Sport V|
|Top Tube (TT)||550||560||575||585|
|Seat Tube (ST)||343||381||432||470|
|Chain Stays (CS)||430||430||430||430|
|Head Tube Angle (HTA)||69.5||69.5||70||70|
|Seat Tube Angle (STA)||74.5||74.5||74.5||74.5|
|Bottom Bracket Drop (BD)||63||63||63||63|
|Head Tube (HT)||95||100||105||115|
|Fork Length (FO)||493||493||493||493|
|Wheel Base (WB)||1051||1062||1072||1083|
|Stand Over Height (SH)||603||635||686||715|
We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.
Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core.
Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.
Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.
Ensures that internally routed cables and wires can move freely without causing any trouble whilst remaining easily accessible for servicing.
Post mount disc brake calipers fit directly onto the seat stay for a strong and light connection whilst a chainstay post mount positions the caliper on the chainstay within the rear triangle for extra protection and better distribution of braking forces. Another benefit is that internal cable routing is also easier and neater via the chainstay.
‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.
Integrated mount on the chainstay to fit a MERIDA kick stand.
‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.
The suspension fork and/or rear shock can be locked, either directly or via a ‘remote control’ lever on the handlebar.