eBIG.SEVEN 500

 

eBIG.SEVEN 500
eBIG.SEVEN 500

Color variants

eBIG.SEVEN 500
frame eBIG.SEVEN LITE
frame size XS, S, M
color MATT-GREY/BLACK (BLUE)
  • Air
  • 100mm suspension travel
  • Tapered
brake front Shimano MT-200
brake rear Shimano MT-200
brake lever attached
headset MERIDA 2341 Neck
  • 720mm width
  • 10mm rise
  • 31.8mm diameter
  • 6° stem angle
grip MERIDA Expert EC
derailleur (f) no
derailleur (r) Shimano Deore Shadow+
shifter front no
shifter rear Shimano Deore
  • 30.9mm diameter
  • 15mm setback
seat clamp MERIDA Expert
saddle MERIDA Comp CC
  • VPE-537
chain KMC e10 Sport EPT
chainguard no
  • 11-42 teeth
  • 10 speed
bottom braket included
  • 20mm inner width
  • 110x15mm width front hub
  • 32 spoke holes
  • Centerlock
  • 148x12mm width rear hub
  • 36 spoke holes
  • Centerlock
axle front attached
axle rear MERIDA Boost axle
spokes Black stainless
spokes disc attached
light front CG-119PG-BLACK(1)
light rear CG-404RG-BLK
kickstand CL-KA98
battery lock Abus key
display Shimano SC-E7000

weighed at medium size

Bike Frame Geometry Image
Frame Size XS S M
Tire Sizes 27.5" 27.5" 27.5"
Frame Size CM 33 38 43
ST seat tube [mm] 330 380 430
TT top tube [mm] 570 570 590
CS chain stay length [mm] 455 438 438
HTA head tube angle [°] 68 68 68
STA seat tube angle [°] 73.5 73.5 73.5
BD bottom bracked drop [mm] 27 27 27
HT head tube [mm] 115 125 135
FL fork length [mm] 487 487 487
R reach [mm] 401 399 416
S stack [mm] 569 579 588
WB wheel base [mm] 1120 1104 1125
SH stand over height [mm] 672.5 710 749
Body Height Cm < 163 157 - 173 > 167

Highlights

HFS-hydroforming Prolite 66 triple butted aluminium hardtail frame with a sporty yet comfortable geometry. Size XS, S and M available in 650B, size M, L and XL available in 29er wheel size. ‘Smart Entry’ cable routing for rattle free running. E8000 and E7000 frame version come with casting motor bracket creating an integrated appearance of the motor into the frame as well as provides an extremely strong connection between frame and motor. Comes with integrated fixings for mudguards and side stand.

100 mm up front offers lots of comfort while having plenty of reserves when you choose a more ‘off road’ route home. Ultimately E-MTBs encourage the rider to go ‘off the beaten track’ whenever possible.

The geometry of our eBIG.NINE and eBIG.SEVEN follow one very simple principle: As sporty as possible, as comfortable as necessary. You ride to work in the morning but fancy a little off road detour on the way home? No problem – that is what these bikes are made for!

‘K-mount’ featuring bikes have fixing points on the chain stays to fit a MERIDA kickstand while ‘C-mount’ equipped bikes have the fixing point for the rear rack (carrier) integrated. ‘F-mount’ equipped bikes have the fixing points for the mudguards (fenders) already integrated.

The E8000 battery is perfectly integrated into the hydroformed down tube and delivers an impressive 500 Wh long detours home – the perfect aggregate for the new E7000 motor, which impresses commuters and sporty riders with its perfect balanced power delivery. However, for the more performance orientated rider we also offer a complete E8000 system.

Dependent on frame size we offer 650B or 29er versions on our TFS and SPEED frame level. The requirements of smaller riders (reduced standover height, preferred lower cockpit) are best met by 650B on S and M frame sizes whilst at the other side of the spectrum, L and XL only come with 29er wheels. Size M is available in either 650B or 29er. 

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails and roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

Technologies

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

IMAGE

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

IMAGE

CASTING MOTOR BRACKET

Sophisticated shape only possible due to casting technology, creating an integrated appearance as well as an extremely strong connection between the E-bike motor and frame for improved performance and reliability.