eSPRESSO CC 400 SE EQ

 

  • material: aluminium
  • 27,5x2,25 max. wheelsize
  • 135x9mm axle standard
  • external
  • max. 504 Wh
frame size S, M, L
color SILK STEEL BLUE (BLACK/DARK SILVER)
  • Coil
  • 80mm suspension travel
  • 27,5x2,4" max wheelsize
headset MERIDA 2346 Neck
  • material: aluminium
  • 660mm width
  • 15mm rise
  • material: aluminium
  • 31.8mm diameter
  • adjustable
  • 90 mm-XS/S/M, 110 mm-L/XL
grip MERIDA EXPERT TK
shifters Shimano Alivio M3100
  • 30.9mm diameter
  • 15mm setback
  • 40mm seatpost suspension travel
seat clamp MERIDA EXPERT
pedal VP VPE-891
chain KMC e9S
chainguard Sunnywheel SW-CG-173A
  • 38 teeth
  • Shimano FC-E6100
  • 11-36 teeth
  • 9 speed
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 135x9mm width rear hub
  • 36 spoke holes
  • Centerlock
  • 20mm inner width
  • material: aluminium
spokes Black stainless
  • 27.5x2.25"
  • wire
  • reflecting line
light front Herrmans H-Black MR4 E
light rear Spanninga Commuter Glow XE integrated in MERIDA MIK HD carrier
carrier MERIDA MIK HD Carrier with Spring clip & Spanninga rear light
fender Sunnywheel SW-FA-311-65A(MSB)
kickstand Massload CL-KA100K-Mount
frame lock Abus 5650 LH-3 lock
battery lock Abus Key
display Shimano SC-E5000

weighed with 27.5" wheels and at frame size S, without pedals

Permitted max. weight 150 kg
Bike Frame Geometry Image
Frame Size S M L
Tyre Sizes 27.5" 27.5" 27.5"
Frame Size CM 43 48 53
ST seat tube [mm] 430 480 530
TT top tube [mm] 588 605 623
CS chain stay length [mm] 445 445 445
HTA head tube angle [°] 68.5 68.5 68.5
STA seat tube angle [°] 73 73 73
BD bottom bracked drop [mm] 50 50 50
HT head tube [mm] 170 190 210
FL fork length [mm] 484 484 484
R reach [mm] 392 403 415
S stack [mm] 642 661 680
WB wheel base [mm] 1114 1133 1152
SH stand over height [mm] 472 465 461
No. Item-No. Name Info Pieces Torque NM
1 2300011768 SCREW 2
2 2258004222 CABLE GUIDE 1
3 2258004211 CABLE GUIDE 1
4 2258004943 CABLE GUIDE 1
5 2311005167 DROPOUT DH-013F 1
6 2300000772 SCREW 2 4
7 2300013403 SCREW 3 16
8 2300013414 SCREW 3 16
9 2300011199 NUT 1 8
10 2300013027 SCREW 1

HIGHLIGHTS

The eSPRESSO CC is available with the new 'Energy Cradle' frame, where the 745 or 630 Wh battery (depending on model) is housed on top of the downtube, and can be accessed via a removable aluminium battery cover, or as a semi-integrated frame, where the 504 Wh battery is integrated into the lower part of the downtube.

The eSPRESSO CC come fully equipped with fenders, kickstand, carrier and lights. Ready for any outing you can think of.

The decision to use 650B wheels with 2.25" off-road tread pattern for our CC models is not just a design feature but has more practical reasons. To add big volume tyres to an e-bike provides increased comfort but also extra traction and therefore more safety reserves. Small and even bigger bumps can easily be rolled over, and a big volume tyre provides more puncture protection compared to a narrow one.

We feature internal cable routing on all models. Cables are routed through the frame, entering and exiting through smooth sockets. Only a clever system for our internal guiding and fixing guarantees reliable and rattle free routing, whilst the cables are protected from moisture and dirt and gives the bike a cleaner look.

The Shimano mid-mounted motor, in combination with the forged motor bracket provides one of the lowest step-through heights in the market.

Technologies

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

IMAGE

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.