eBIG.NINE 400 EQ

Frame Size	S	M	L	XL
Tire Sizes	29"	29"	29"	29"
Frame Size CM	38	43	48	53
ST seat tube [mm]	380	430	480	530
TT top tube [mm]	588	605	625	645
CS chain stay length [mm]	465	465	465	465
HTA head tube angle [°]	67.5	67.5	67.5	67.5
STA seat tube angle [°]	74.5	74.5	74.5	74.5
BD bottom bracked drop [mm]	62.5	62.5	62.5	62.5
HT head tube [mm]	115	120	130	140
FL fork length [mm]	527	527	527	527
R reach [mm]	411	427	445	462
S stack [mm]	636	640	650	659
WB wheel base [mm]	1165	1183	1204	1225
SH stand over height [mm]	719	750	794	835

Download PDF

No.	Item-No.	Name	Info	Pieces	Torque NM
1	2300005272	SCREW		1
2	2311005101	DROPOUT	DH - 057	1
3	2300010950	SCREW		2	4
4	2258001133	CABLE GUIDE		1
5	2298002501	SCREW		1	5
6	2300015751	SCREW		3	12
7	2300015762	SCREW		3	12
8	2136001371	BC - MOUNT		1
9	2298011283	SCREW		6	5
10	2298011164	SCREW		1	5
11	2143003600	PLUG		2
12	2143003923	ON / OFF BUTTON		1
13	2161002229	CABLE GUIDE		1
14	2111001046	CABLE HOLDER		2
15	2161002133	ENERGY GUARD TWIST		1
16	2300011412	SCREW		2	4
17	2143003967	PLUG		1
18	2258004471	CABLE GUIDE		1
19	2258004943	CABLE GUIDE		1
20	2161001671	COVER		1
21	2300011810	SCREW		1	4
22	2029000856	BUMPER	ONLY SIZE S	1
23	2258004062	SMART ENTRY SE5-1-0-0	1 x 5 mm hydraulic cable, aluminum	1
	2258004051	SMART ENTRY SE4-1-0-0	1 x 4 mm mechanical cable, aluminum	1
	2258004028	SMART ENTRY SE-0	Blind plug, aluminum black anodized	1
24	2298010710	SCREW		4	5

CATEGORY HIGHLIGHTS

MORE POWER AND RANGE

Shimano's EP8 motor offers a perfectly balanced power delivery with up to 85 Nm and has further improved on size, weight, noise and motor drag. The new 630 Wh battery is perfectly integrated into the hydroformed down tube and delivers an impressive range for even longer detours home.

WATER CARRIER

Due to the integrated battery, we were able to offer water bottle cage fixing points, allowing bottles or accessories like a lock or pump to the frame to be fitted into the main frame triangle. Great if you want to keep your back free of hydration packs and backpacks.

SPORTY, SPORTY

The geometry of our eBIG.NINE follows one very simple principle: As sporty as possible, as comfortable as necessary. You ride to work in the morning but fancy a little off-road detour on the way home? No problem – that is what these bikes are made for!

WITH K/C/F MOUNT

‘K-mount’ featuring bikes have fixing points on the chain stays to fit a MERIDA kickstand while ‘C-mount’ equipped bikes have the fixing point for the rear rack (carrier) integrated. ‘F-mount’ equipped bikes have the fixing points for the mudguards (fenders) already integrated.

Technologies

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.

CASTING MOTOR BRACKET

Sophisticated shape only possible due to casting technology, creating an integrated appearance as well as an extremely strong connection between the E-bike motor and frame for improved performance and reliability.

ENERGY GUARD TWIST

Twist lock mechanism that is located at the top end of the 'Energy Guard' battery cover, for easy locking and unlocking of the protective internal battery cover.

WATCH VIDEO ON YOUTUBE