eBIG.NINE 775 EQ

eBIG.NINE 775 EQ

 

Find Dealer
  • material: aluminium
  • 29x2.35" without fender max./ 29"x2.25" with fender max. wheelsize
  • 148x12mm axle standard
  • intube
frame size S, M, L, XL
color GREY/BLACK
  • Air
  • 100mm suspension travel
  • Tapered
  • 51mm fork offset
  • 29x2.4" max wheelsize
headset MERIDA-8155 (for the steerer 1-1/8"~1.5")
  • material: aluminium
  • 720mm width
  • 10mm rise
  • material: aluminium
  • 31.8mm diameter
  • adjustable
  • 90 mm all sizes
grip MERIDA EXPERT TK
derailleur (r) Shimano XT RDM8100 Shadow+ 12
shifters Shimano DEORE M6100 12
  • material: aluminium
  • 34.9mm diameter
  • 0mm setback
seat clamp MERIDA EXPERT
pedal VP VPE-527
chain CN-M6100
  • 36 teeth
  • Shimano FCEM600
  • 10-51 teeth
  • 12 speed
bottom braket included
  • 110x15mm width front hub
  • 32 spoke holes
  • Centerlock
  • 148x12mm width rear hub
  • 36 spoke holes
  • Centerlock
  • 20mm inner width
  • material: aluminium
  • including removeable lever, 6/4mm allen key
spokes Black stainless
light front LEZYNE E-BIKE POWER STVZO E115, X-Lock stem mount
light rear Spanninga Commuter GLOW XE
carrier MERIDA MA008-1 w/spring clamp + Spanninga GLOW XE
fender Sunnywheel SW-FA311-65A/ SW-FA311-65E1
kickstand CL-KA98, 29"
frame lock Abus 5650 LH-3 lock
battery lock Abus key
display Shimano SC-E6100
Bike Frame Geometry Image
Frame Size S M L XL
Tyre Sizes 29" 29" 29" 29"
ST seat tube [mm] 380 430 480 530
TT top tube [mm] 588 605 625 645
CS chain stay length [mm] 465 465 465 465
HTA head tube angle [°] 67.5 67.5 67.5 67.5
STA seat tube angle [°] 74.5 74.5 74.5 74.5
BD bottom bracked drop [mm] 62.5 62.5 62.5 62.5
HT head tube [mm] 115 120 130 140
FL fork length [mm] 527 527 527 527
R reach [mm] 411 427 445 462
S stack [mm] 636 640 650 659
WB wheel base [mm] 1165 1183 1204 1225
SH stand over height [mm] 719 750 794 835
No. Item-No. Name Info Pieces Torque NM
1 A2300000048 SCREW M4x0.7 L8mm 1 3~5
2 A2311000067 RD-HANGER DH-057 1
3 A2300000185 SCREW M3x0.5 L20.5mm 2 2~4
4 A2258000012 CABLE GUIDE for M5 fixation 1
5 A2298000004 SCREW M5x0.8 L15mm with washer 1 3~5
6 A2300000468 SCREW M8x1.25 L18.5mm 3 11~12
7 A2300000469 SCREW M8x1.25 L23mm 3 11~12
8 A2136000017 MOUNT for bottle cage 1
9 A2298000154 SCREW M5x0.8 L12mm 8 3~5
10 A2298000145 SCREW M5x0.8 L20mm 1 3~5
11 A2143000097 BLIND PLUG for SIMPLO batteries 2
12 A2143000125 BUTTON ON-OFF; for SHIMANO batteries 1
13 A2161000127 CABLE GUIDE 1
14 A2111000008 CABLE GUIDE 2
15 A2161000118 COVER for battery 1
16 A2300000213 SCREW M3x0.5 L13.5mm 2 2~4
17 A2143000129 BLIND PLUG for key opening 1
18 A2258000079 CABLE PLUG for RD 1
19 A2258000099 CABLE PLUG for rear brake and speed sensor 1
20 A2161000079 COVER for top tube opening 1
21 A2300000231 SCREW M3x0.5 L8 1 2~4
22 A2029000024 BUMPER for INTERNAL BLOCK 1
23 CABLE GUIDE SMART ENTRY 1
25 A2002000136 THRU AXLE EXPERT TR; L=178mm M12x1.5 TL=14mm w. NUT 1
26 A2248000039 CLAMP for INTERNAL BLOCK 1
27 A2191000150 HEAD SET MERIDA/VP-8155 (MH-P16/MH-P16) 1
28 A2191000152 HEAD SET MERIDA/VP-8157 (MH-P16/MH-P16) 1

To reduce production and delivery times, we are sometimes forced to make last-minute specification changes. Please be aware that those changes might not be reflected on these product pages and images.

HIGHLIGHTS

Shimano's EP8 motor offers a perfectly balanced power delivery with up to 85 Nm and has further improved on size, weight, noise and motor drag. The new 630 Wh battery is perfectly integrated into the hydroformed down tube and delivers an impressive range for even longer detours home.

Due to the integrated battery, we were able to offer water bottle cage fixing points, allowing bottles or accessories like a lock or pump to the frame to be fitted into the main frame triangle. Great if you want to keep your back free of hydration packs and backpacks.

The geometry of our eBIG.NINE follows one very simple principle: As sporty as possible, as comfortable as necessary. You ride to work in the morning but fancy a little off-road detour on the way home? No problem – that is what these bikes are made for!

‘K-mount’ featuring bikes have fixing points on the chain stays to fit a MERIDA kickstand while ‘C-mount’ equipped bikes have the fixing point for the rear rack (carrier) integrated. ‘F-mount’ equipped bikes have the fixing points for the mudguards (fenders) already integrated.

Technologies

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

IMAGE

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

X-TAPER HEADTUBE
IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

SMOOTH WELDING
IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

INTERNAL CABLE ROUTING
IMAGE

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

SMART ENTRY
IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

K-MOUNT
IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable. 

IMAGE

CASTING MOTOR BRACKET

Sophisticated shape only possible due to casting technology, creating an integrated appearance as well as an extremely strong connection between the E-bike motor and frame for improved performance and reliability.

IMAGE

ENERGY GUARD TWIST

Twist lock mechanism that is located at the top end of the 'Energy Guard' battery cover, for easy locking and unlocking of the protective internal battery cover.