eONE-FORTY 8000

 

Climb the toughest trails, send them downhill - then repeat, all thanks to a mix of lightweight carbon front triangle with integrated 630 Wh battery and powerful EP8 motor plus top end kit.
Find Dealer

Our range topping eONE-FORTY 8000 gets a lightweight carbon fibre front triangle with integrated Shimano EP8 drive unit and 630 Wh battery, paired to agile yet confidence-inspiring trail geometry that’s ready for all-day off-road adventures. High-performance Fox suspension means it’s ready to clean any climb you point it at while still delivering complete control on the descents and the tough Shimano LinkGlide drivetrain offers up smooth shifting, time after time. It’s our most balanced trail e-bike yet.

The eONE-FORTY might be the little sibling to our multiple award and test winning eONE-SIXTY, but when it comes to providing agile trail handling with superb flow and fun, it plays second fiddle to no-one. Equipped with Shimano’s powerful yet refined EP8 drive unit and with the 630 Wh or 750 Wh battery (model specific) integrated seamlessly into the frame, it’s the perfect partner for all kinds of adventures. The trail-specific, balanced geometry is paired to a mixed 29er/27.5” wheel size setup that delivers flow and fun for riders of all abilities, while a steeper seat angle boosts climbing capability, something ideal for an all-day e-bike mission. The low bottom bracket and lower standover height mean extra confidence while the 140 mm of front wheel and 133 mm of rear wheel travel offer up control, comfort and real rough terrain capability. The eONE-FORTY’s versatility is boosted even further by the EQ models that come fully equipped with mudguards, rack, lights and kickstand so it can tackle the mean streets as well as muddy trails.

  • Lightweight carbon front/aluminium rear frame
  • Shimano EP8 motor and internally mounted 630 Wh battery
  • Fox Performance level suspension
  • Kitted out with Shimano brakes and LinkGlide drivetrain
  • Mixed wheel size setup with 140/133 mm travel split
  • THERMO GATE and WIRE PORT tech
  • material: carbon
  • 133mm suspension travel
  • 27.5x2.8" max. wheelsize
  • 148x12mm axle standard
  • intube
  • max. 630 Wh
frame size S, M, L, XL, XXL
color DARK STRAWBERRY (FLASH BCP)
  • Air
  • 140mm suspension travel
  • Tapered
  • 51mm fork offset
  • 29x2.5" max wheelsize
headset MERIDA-8152
  • 780mm width
  • 20mm rise
  • material: aluminium
  • 35mm diameter
  • 0° stem angle
  • Supernova mount
  • 50 mm all sizes
grip MERIDA EXPERT EC
derailleur (r) Shimano XT RDM8130 Shadow+ 11
shifters Shimano SL -MT500-IL / Shimano XT M8130 11
  • 30.9mm diameter
  • 0mm setback
  • S 100mm travel seatpost - S/M 125mm travel seatpost - L 150mm travel seatpost - XL/XXL 170mm travel seatpost
seat clamp MERIDA EXPERT clamp
pedal VP VPE-527
chain CNLG500
  • 34 teeth
  • Shimano FCEM600
  • 11-50 teeth
  • 11 speed
bottom braket included
  • 110x15mm width front hub
  • 32 spoke holes
  • Centerlock
  • 148x12mm width rear hub
  • 36 spoke holes
  • Centerlock
  • 29mm inner width
  • material: aluminium
  • Tubeless ready (tubeless tape and valves not included)
  • including removeable lever, 6/4mm allen key
spokes Black stainless
  • 29x2.4 "
  • fold
  • BlackChili
  • ProTection Apex
  • TR
  • 27.5x2.6 "
  • fold
  • BlackChili
  • ProTection Apex
  • TR
light front LEZYNE E-BIKE POWER STVZO E115, reverse MERIDA Custom Mount
light rear USB REAR Light CG-214RG
fender C093-02F + C093-02R
battery Shimano E8036 630Wh / Shimano E8035 504Wh for S only
display Shimano SC-E7000
max. weight 140 kg
Bike Frame Geometry Image
Frame Size S M L XL XXL
Tyre Sizes 29/27.5" 29/27.5" 29/27.5" 29/27.5" 29/27.5"
ST seat tube [mm] 405 420 440 470 500
TT top tube [mm] 561 582 603 626 650
CS chain stay length [mm] 439.5 439.5 439.5 439.5 439.5
HTA head tube angle [°] 66.5 66.5 66.5 66.5 66.5
STA seat tube angle [°] 76.5 76.5 76.5 76.5 76.5
BD bottom bracked drop [mm] 24 24 24 24 24
HT head tube [mm] 110 115 120 135 150
FL fork length [mm] 551 551 551 551 551
R reach [mm] 410 429.5 449.5 469.5 489.5
S stack [mm] 622 626.5 631 644.5 658
WB wheel base [mm] 1160 1182 1204 1230.5 1256.5
SH stand over height [mm] 736 731 727 734 748
No. Item-No. Name Info Pieces Torque NM
1 2294001180 WASHER 2
2 2221002395 BEARING 3802V-2RS 24D*15D*7W 2
3 2300012662 BOLT 1
4 2300012673 SCREW 1 18
5 2300014426 SCREW 1 12
6 2300014103 BOLT 1
7 2035001617 SLINK 1
8 2221002254 BEARING 6800V-2RS 19D*10D*5W 2
9 2300011865 SCREW 2 16
10 2294004633 WASHER 2
11 2221002265 BEARING 6801-2RS 21D*12D*5W 2
12 2300012695 SCREW 1 14
13 2300012684 BOLT 1
14 2294002255 WASHER 2
15 2294004826 WASHER 4
16 2221002328 BEARING 12214V-2RS 21D*12D*4W 8
17 2300012703 BOLT 4
18 2300012714 SCREW 4 14
19 2300005272 SCREW 1 5
20 2311005101 HANGER DH-057 1
21 2300010950 SCREW 2 4
22 2029000856 BUMPER 1
23 2258005535 CABLE GUIDE 1
24 2258005546 CABLE GUIDE 1
25 2029000845 BUMPER ONLY ST 405mm 1
25 20290001181 BUMPER ONLY ST 440mm/470mm/500mm 1
26 2161001314 COVER MOUNT 1
27 2300011412 SCREW 2 4
28 2143003718 PLUG 1
29 2298011283 SCREW 4 5
30 2161001303 CABLE GUIDE 1
31 2161002100 ENERGY GUARD ONLY 504WH 1
31 2161002111 ENERGY GUARD ONLY 630WH 1
32 2300016075 SCREW 1 5
33 2258003801 CABLE GUIDE 2
34 2258004943 CABLE GUIDE 1
35 2300015751 SCREW 3 12
36 2300015762 SCREW 3 12
37 2258001133 CABLE GUIDE 1
38 2298002501 SCREW 1 5
39 2248001919 INTERNAL BLOCK CLAMP 1
40 2258005814 CABLE GUIDE 1
41 2111001046 CABLE HOLDER 2

Technologies

IMAGE

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

X-TAPER HEADTUBE
IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

SMOOTH WELDING
IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

INTERNAL CABLE ROUTING
IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

IMAGE

NANO MATRIX CARBON

To protect the integrity of carbon frames, the fibres are bonded together with an epoxy resin with added nano particles, increasing impact resistance by up to 40%.

IMAGE

AWS

When creating the individual carbon elements, an inflatable bladder is used to ensure there are no wrinkles inside the tube as these can add weight and create weakness. This results in a lighter, stiffer and stronger frame.

IMAGE

RACELITE 61 ALUMINIUM

We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

K-MOUNT
IMAGE

THERMO GATE

Specifically located openings near the head tube which work like a chimney and allow the warm air to dissipate to guarantee the optimum operating temperature of the internal battery. The THERMO GATE enables the battery to perform at its best, in any condition.

THERMO GATE
IMAGE

ENERGY GUARD

A two-component battery cover, which offers perfect protection for the internal battery. The softer (outer) layer reduces noises, seals the downtube perfectly and absorbs hits from trail debris easily, while the harder (inner) layer ensures that the battery does not get damaged and gives it the structural shape. All critical parts like the rubber strap and o-rings for perfect fitting can be replaced. 

IMAGE

INTERNAL BLOCK

First introduced in our 2015 NINETY-SIX, the new version of the 'Internal Block' is incorporated directly in the frame and prevents the fork crown from hitting the frame in case of a crash or an extreme steering angle. As an extra protection, there are additional rubber bumpers on the frame to avoid any frame damage from the fork crown.