- Air 130mm suspension travel
- 780mm width
- 20mm rise
- 35mm diameter
- 0° stem angle
- 30.9mm diameter
- 0mm setback
- S: 100mm travel seatpost - M/L/XL: 125mm travel seatpost
- 32 teeth
- 11-50 teeth
- 12 speed
- 38mm inner width
- TR EXO 3C
- TR EXO 3C
- 110x15mm width front hub
- 32 spoke holes
- 148x12mm width rear hub
- 32 spoke holes
|Frame Size Cm||39||44||49||54|
|ST seat tube [mm]||390||440||490||540|
|TT top tube [mm]||594||616||639||662|
|CS chain stay length [mm]||427.5||427.5||427.5||427.5|
|HTA head tube angle [°]||67.5||67.5||67.5||67.5|
|STA seat tube angle [°]||73.5||73.5||73.5||73.5|
|BD bottom bracked drop [mm]||60||60||60||60|
|HT head tube [mm]||105||115||125||135|
|FL fork length [mm]||541||541||541||541|
|R reach [mm]||405||425||445||465|
|S stack [mm]||637||647||656||665|
|WB wheel base [mm]||1123||1146||1170||1194|
|SH stand over height [mm]||662||699||732||763|
A triple butted and hydroformed 6066 series aluminium frame built to withstand even the harshest trail abuse. Through our special chainstay yoke we achieve huge tyre clearance whilst allowing space for a variety of chain ring sizes.
A dropper post is allowing the rider to get the saddle out of the way when the gradient gets steeper, giving him/her more space to manoeuver and control over their bike. The fitted dropper posts featuring internal cable routing and remote levers, creating a cleaner look and allowing easier ‘on the go’ saddle height adjustment.
Our BIG.TRAIL is closely related to our full suspension trail bike range sharing the same long, flat, low geometry. An enduro influenced 67.5° head angle and 130 mm fork combined with extra short 427.5 mm chainstays deliver agile handling. All frame sizes have a 35 mm stem complementing the long top tube and 760 mm wide bars.
650B+ wheels featuring 35-40 mm wide inner width rims and 2.8" tyres which are hugely capable when the going gets rough but also offer loads and loads of up-hill traction, cornering grip, puncture resistance and cushioning, without being draggy or sluggish. Most models offer tubeless ready rims and tyre configurations making a conversion to tubeless incredibly straightforward.
Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails and roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.
‘Boost’ standard front & rear. The extra 6 mm rear hub and 10 mm front hub spacing in comparison with conventional hubs brings the width up to 148 mm / 110 mm and allows for a shallower spoke angle for an even stiffer and stronger wheel. On top of that, the chain line moves outwards – an important requirement for short chainstays.