The new eONE-SIXTY SL 10K is loaded with the best equipment out there and introduces the compact and lightweight light-support Performance Line SX drive unit from Bosch to our new e-enduro platform. Its progressive geometry offers enduro-focused handling with the perfect combination of stability, climbing prowess and manoeuvrability, and adds in the punchy 55 Nm of torque to offer active riders the perfect balance between 'human-powered' handling and eMTB assistance.
The eONE-SIXTY SL represents a new breed of e-mountain bike, combining the poise of an unassisted bike with the power of a Bosch SX drive unit to help you ride further and faster. With a lightweight full carbon frame, 160 mm of well-balanced travel and a build that blends hard-hitting performance with low weight, it blurs the line between conventional and assisted riding. The eONE-SIXTY SL combines ‘human-powered’ bike handling and enduro tough but lightweight equipment with the latest compact Bosch Performance Line SX motor with 55 Nm, and a fully integrated 400 Wh battery plus an optional 250 Wh range extender for an experience that blurs the line between normal and e-bike, plus a colour Kiox 400C display mounted in the top tube. If you are the type of rider who likes to pedal hard and use the assistance for maximum fun on the trail, then the eONE-SIXTY SL should be your next trail and enduro companion.
- Lightweight full carbon fibre CF4 frame with 160 mm rear wheel travel
- SRAM XX Eagle Transmission 12-speed wireless drivetrain, SRAM Maven Ultimate brakes and FSA SC I30 carbon wheelset
- Fox 36 Factory fork with 160 mm travel and Float X Factory rear shock
- Bosch Performance Line SX drive unit, integrated 400 Wh battery, Kiox 400C colour display, optional 250 Wh range extender
- Fast-rolling 29er wheel size as standard, with the option to run a mixed-size setup
- Reach-based AGILOMETER-inspired sizing system with long travel dropper post
Awards & Media
- 1
- 2
- 3
- 4
- 5
- 6
- material: carbon
- 160mm suspension travel
- 29x2,4" max. wheelsize
- 148x12mm axle standard
- fixed battery
- Air, 160mm suspension travel
- Tapered
- 44mm fork offset
- 29x2.6" max wheelsize
- platform
- 4 piston
- 200mm
- 34,9mm diameter
- 0mm setback
- travel seatpost XSHORT: 150mm, SHORT/MID: 180mm, LONG: 210mm, XLONG: 240mm
- V-mount adapter
- incl. MERIDA minitool
- Flattop
- 165 mm for all sizes
- 10-52 teeth
- 12 speed
- 110x15mm width front hub
- 148x12mm width rear hub
- 30mm inner width
- 6-Bolt
- Sram XD
- material: carbon
- Tubeless ready (tubeless tape and valves included)
- 29x2.5 "
- fold
- TR EXO+ 3C MaxxGrip
- 29x2.4 "
- fold
- TR EXO+ 3C MaxxTerra
- including removeable lever, 6/4mm allen key
weighed at frame size M
| Frame Size | XShort | Short | Mid | Long | XLong |
| Tyre Sizes | 29" | 29" | 29" | 29" | 29" |
| ST seat tube [mm] | 400 | 410 | 425 | 445 | 465 |
| TT top tube [mm] | 543 | 567 | 591 | 616 | 640 |
| CS chain stay length [mm] | 450 | 450 | 450 | 450 | 450 |
| HTA head tube angle [°] | 64 | 64 | 64 | 64 | 64 |
| STA seat tube angle [°] | 78.5 | 78.5 | 78.5 | 78.5 | 78.5 |
| BD bottom bracket drop [mm] | 27.5 | 27.5 | 27.5 | 27.5 | 27.5 |
| HT head tube [mm] | 100 | 105 | 110 | 115 | 120 |
| FL fork length [mm] | 571 | 571 | 571 | 571 | 571 |
| R reach [mm] | 420 | 443 | 466 | 489 | 512 |
| S stack [mm] | 611 | 616 | 620 | 625 | 629 |
| WB wheel base [mm] | 1202 | 1228 | 1253 | 1278 | 1303 |
| SH stand over height [mm] | 753 | 757 | 761 | 768 | 774 |
| Str Stack To Reach Ratio Pc | 1.45 | 1.39 | 1.33 | 1.28 | 1.23 |
| No. | Item-No. | Name | Info | Pieces | Torque NM |
| 1 | A2300000729 | BOLT | M6x1 OD15/17mm L69mm | 1 | |
| 2 | A2221000040 | BEARING | 172607V-2RS OD26mm ID17mm W7mm | 1 | |
| 3 | A2294000102 | WASHER | OD21mm ID17.1mm H3mm | 1 | |
| 4 | A2294000016 | WASHER | OD19mm ID15.1mm H3mm | 3 | |
| 5 | A2221000043 | BEARING | 3802V-2RS OD24mm ID15mm W7mm | 3 | |
| 6 | A2300000609 | SCREW | M10x1 L15mm | 1 | 15~17 |
| 7 | A2300000736 | BOLT | M6x1 OD10mm L39mm | 1 | |
| 8 | A2298000113 | SCREW | M6x1 L16mm | 2 | 8~10 |
| 9 | A2294000196 | WASHER | for M6 sunkenhead screw OD16mm | 4 | |
| 10 | A2300000693 | BOLT | M6x1 OD12mm L62mm | 1 | |
| 11 | A2300000737 | SCREW | M8x1 L49mm | 1 | 18~20 |
| 12 | A2294000224 | LOCK RING | for ID21 | 1 | |
| 13 | A2294000223 | WASHER | OD15.5mm ID12.1mm H3mm | 2 | |
| 14 | A2221000035 | BEARING | 6801V-2RS OD21mm ID12mm W5mm | 2 | |
| 15 | A2031000097 | LINK | 1 | ||
| 16 | A2262000059 | WASHER | OD15.5mm ID12.1mm H31mm | 1 | |
| 17 | A2300000743 | SCREW | M15x1 L20.5mm | 2 | 23~25 |
| 18 | A2294000225 | LOCK RING | for ID24 | 2 | |
| 19 | A2302000109 | NUT | M15x1 flipchip | 2 | |
| 20 | A2292000141 | WASHER | OD13mm ID9mm H1mm | 1 |
| No. | Item-No. | Name | Info | Pieces | Torque NM |
| 1 | A2191000232 | HEAD SET | Acros AZA-717 | 1 | |
| 4 | A2298000144 | SCREW | M5x0.8 L10mm | 2 | 3~5 |
| 5 | A9082000114 | BOSCH OEM PART | Bosch PT400 | 1 | |
| 6 | A2258000233 | MOUNT | Cable Rail - Loop | 2 | |
| 7 | A2258000234 | MOUNT | Cable Rail - Base | 1 | |
| 8 | A2300000256 | SCREW | M4x0.7 L10mm | 1 | 3~5 |
| 9 | A2298000154 | SCREW | M5x0.8 L12mm | 6 | 4~6 |
| 10 | A2302000102 | NUT | Bosch Motor Nut | 2 | |
| 11 | A2298000160 | SCREW | M4x0.7 L10mm | 7 | 3~5 |
| 12 | A2158000112 | PROTECTOR | for right chain stay | 1 | |
| 13 | A2263000065 | PROTECTOR | for motor right side | 1 | |
| 14 | A9003000068 | BOSCH OEM PART | Bosch BDU3145 SX | 1 | |
| 15 | A2263000066 | PROTECTOR | for motor left side | 1 | |
| 16 | A2311000149 | RD-HANGER | UDH | 1 | |
| 17 | A2002000135 | THRU AXLE | EXPERT TR; L=178.5mm M12x1 TL=13.5mm | 1 | |
| 18 | A2258000187 | MOUNT | Bosch Mount for speed sensor | 1 | |
| 19 | A9061000102 | BOSCH OEM PART | Bosch speed sensor | 1 | |
| 20 | A2158000113 | PROTECTOR | for left chain stay | 1 | |
| 21 | A2262000057 | BOSCH OEM PART | Bosch motor screw sleeve | 2 | |
| 22 | A2300000672 | SCREW | Bosch motor screw short | 1 | 30 |
| 23 | A2300000671 | SCREW | Bosch motor screw long | 1 | 30 |
| 24 | A2263000062 | MOUNT | for charging port | 1 | |
| 25 | A2298000448 | SCREW | screw for plastic part | 1 | |
| 26 | A2116000284 | FENDER | 1 | ||
| 27 | A2143000123 | BLIND PLUG | for fender holes | 2 | |
| 28 | A2143000160 | CABLE PLUG | for speed sensor/Di2 cable | 2 |
