• material: aluminium
  • 700C wheelsize
  • 142x12mm axle standard
  • external
  • max. 504 Wh
frame size XS, S, M, L, XL
color MATT BLACK/GLOSSY SAND-GOLD
  • Air
  • 63mm suspension travel
  • Tapered
  • remote lockout
headset FSA NO.55E neck
  • material: aluminium
  • 640mm width
  • 35mm rise
  • material: aluminium
  • 31.8mm diameter
  • adjustable
  • 90 mm-XS/S/M, 110 mm-L/XL
grip MERIDA EXPERT TK
derailleur (r) Shimano XT M8000 Shadow+
shifters Shimano XT
  • 30.9mm diameter
  • 0mm setback
  • XS/S 100mm travel seatpost - M/L/XL 120mm travel seatpost
  • XS/S 40mm seatpost suspension travel - M/L/XL 50mm seatpost suspension travel
seat clamp MERIDA EXPERT
  • V-mount
  • incl. MERIDA minitool
  • VPE-891
chain KMC e11S
chainguard Sunnywheel SW-CG-173A
  • 38 teeth
  • Shimano FC-E8000
  • 11-42 teeth
  • 11 speed
bottom braket included
  • 100x15mm width front hub
  • 32 spoke holes
  • Centerlock
  • 142x12mm width rear hub
  • 36 spoke holes
  • Centerlock
  • 20mm inner width
  • material: aluminium
  • including removeable lever, 6/4mm allen key
spokes Black stainless
  • 622-47
  • wire
  • reflecting line
light front Herrmans H-BLACK MR8 E
light rear Herrmans H-Cargo integrated in MERIDA MIK carrier
carrier MERIDA MIK Carrier with Spring clip & H-Cargo Light
fender Sunnywheel SW-FA311-60E1 (MSB)
kickstand CL-KA98
frame lock Abus 5650 LH-3 lock
battery lock Abus key
display Shimano SC-E6100

weighed at frame size S without pedals

Bike Frame Geometry Image
Frame Size XS S M L XL
Tire Sizes 28" 28" 28" 28" 28"
Frame Size CM 42 45 49 53 57
ST seat tube [mm] 415 450 490 530 570
TT top tube [mm] 575 590 605 620 635
CS chain stay length [mm] 490 490 490 490 490
HTA head tube angle [°] 69.5 70 70 70.5 70.5
STA seat tube angle [°] 74 73.5 73 73 72.5
BD bottom bracked drop [mm] 70 70 70 70 70
HT head tube [mm] 160 170 185 200 215
FL fork length [mm] 477 477 477 477 477
R reach [mm] 389 394 398 408 412
S stack [mm] 651 662 676 693 707
WB wheel base [mm] 1140 1143 1153 1163 1171
SH stand over height [mm] 378 379 379 380 380
No. Item-No. Name Info Pieces Torque NM
1 2161000692 Battery Cover 1
2 2161000700 Battery Cover 1
3 2300013426 Screw 2 5
4 2143003280 Plug 1
5 2300012101 Screw 3 12
6 2300012112 Screw 3 12
7 2258004943 Cable guide 1
8 2300009458 Screw 2 4
9 2300005272 Screw 1 5
10 2311005101 Dropout DH-057 1
14 2143003213 BLIND PLUG if no carrier is mounted 2
15 2298011131 Screw if no carrier is mounted 2 8
16 SMART ENTRY

CATEGORY HIGHLIGHTS

A centrally positioned low centre of gravity, which has been achieved through the positioning of the battery in the lower position of the downtube as well as the location of the Shimano motors, enables to deliver fantastic riding characteristics in any situation which are extremely important in particular in wave low step through frames which have the tendency to chatter and jitter when power is applied.

In the city/trekking sector, hub gear drivetrains have become more or less the standard. For the model year 2020, we have updated the hub gear frames with slider dropouts for smooth and easy chain tensioning. Furthermore, the dropouts on both frames, hub gear and derailleur drivetrain now have, besides the Racktime interface, standard carrier mounts.

HFS-hydroforming Prolite 66 triple butted aluminium frame based around fast rolling 700c wheels and with commuting and leisure riding in mind. A higher front end and a compact geometry make for a more upright and extremely comfortable riding position. Battery positioned extra low for improved handling. Comes equipped with mudguards, rear rack, side stand, lock and lights.

We feature internal cable routing on all our eSPRESSO models. Cables are routed through the frame, entering and exiting through smooth sockets. Only a clever system for our internal guiding and fixing guarantees reliable and rattle free routing and gives the bike a cleaner look.

The outstanding frame stiffness has a strong influence on the riding characteristics of wave low step through frames. The tapered head tube, the large tube diameters, the forged motor bracket as well as the 142x12 mm through rear axle all contribute to achieve a safe and precise riding experience. 

The Shimano mid-mounted motor, in combination with the forged motor bracket provides one of the lowest step-through heights in the market.

The whole range rides on fast rolling 700c wheels, ideal for rides on roads, lanes and smooth tracks. We fit tyres with reflective sidewalls and puncture protection that will get you to your destination quickly and safely.

Technologies

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

IMAGE

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

SMART ENTRY

Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.

IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.