eSPRESSO TK 600 EQ

 

  • material: aluminium
  • 700C wheelsize
  • 135x9mm axle standard
  • external
  • max. 504 Wh
frame size S, M, L
color MATT BLACK/GLOSSY ANTHRACITE
  • Coil
  • 80mm suspension travel
headset MERIDA 2346 Neck
  • material: aluminium
  • 640mm width
  • 35mm rise
  • material: aluminium
  • 31.8mm diameter
  • adjustable
  • 90 mm-S/M, 110 mm-L
grip MERIDA EXPERT TK
derailleur (r) Shimano Deore Shadow+
shifter rear Shimano Deore
  • 30.9mm diameter
  • 15mm setback
  • 40mm seatpost suspension travel
seat clamp MERIDA EXPERT
  • VPE-891
chain KMC e10S
chainguard Sunnywheel SW-CG-173A
  • 170 mm-S/M, 175 mm-L
  • 11-42 teeth
  • 10 speed
bottom braket included
  • 20mm inner width
  • material: aluminium
  • 27.5x2.2"
  • wire
  • reflecting line
  • 27.5x2.2"
  • wire
  • reflecting line
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 135x9mm width rear hub
  • 36 spoke holes
  • Centerlock
spokes Black stainless
light front Herrmans H-BLACK MR4 E
light rear Herrmans H-Trace
carrier RACKTIME RT MERIDA TK / CC
fender Sunnywheel SW-FA-311-65A(MSB)
kickstand CL-KA100
frame lock Abus 5650 LH-3 lock
battery lock Abus key
display Shimano SC-E6100

weighed at frame size M without pedals

Bike Frame Geometry Image
Frame Size S M L
Frame Size CM 43 48 53
ST seat tube [mm] 430 480 530
TT top tube [mm] 588 605 623
CS chain stay length [mm] 445 445 445
HTA head tube angle [°] 68.5 68.5 68.5
STA seat tube angle [°] 73 73 73
BD bottom bracked drop [mm] 50 50 50
HT head tube [mm] 170 190 210
FL fork length [mm] 484 484 484
R reach [mm] 391.5 403 415
S stack [mm] 641.5 661 679.5
WB wheel base [mm] 1114.5 1133 1152.5

CATEGORY HIGHLIGHTS

Based on the central position of the battery in front of the seat tube and the low position of the Shimano motor, we were able to achieve an optimum centre of gravity. The low and well-positioned centre of gravity provides the bike with outstanding riding characteristics which are extremely important in particular in wave low step-through frames which have the tendency to chatter and jitter when power is applied.

HFS-hydroforming Prolite 66 triple butted aluminium frame based around fast rolling yet durable 650B wheels and with commuting and leisure riding in mind. A higher front end and a compact geometry make for a more upright and extremely comfortable riding position. Battery positioned extra low for improved handling. Comes equipped with mudguards, rear rack, side stand, lock and lights.

The eSPRESSO TK & CC come fully equipped with fenders, kickstand, carrier and lights. Ready for any outing you can think of. 

The decision to use 650B wheels with 2.2" city tread pattern tyres for the TK models and 2.25" off-road tread pattern for the CC models is not just a design feature but has more practical reasons. To add big volume tyres on an e-bike provides increased comfort but also extra traction and therefore more safety reserves. Small and even bigger bumps can easily be rolled over, and a big volume tyre provides more puncture protection compared to a narrow one. 

Cables are routed through the frame to keep the look of the bike neat and uncluttered, whilst the cables are out of the airflow and protected from moisture and dirt.

The outstanding frame stiffness has a strong influence on the riding characteristics of wave low step through frames. The tapered head tube, the large tube diameters, the forged motor bracket as well as the 142x12 mm through rear axle all contribute to achieve a safe and precise riding experience. 

The Shimano mid-mounted motor in combination with the forged motor bracket provides the eSPRESSO CITY with one of the lowest step through heights in the market.

Technologies

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

IMAGE

HFS - HYDRO FORMING SYSTEM

Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

INTERNAL CABLE ROUTING

Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.

IMAGE

DI2 READY

Bikes/frames with the symbol ‘Di2 Ready’ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.

IMAGE

F-MOUNT

‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.

IMAGE

K-MOUNT

Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).

IMAGE

C-MOUNT

‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.