• material: aluminium
  • 700C wheelsize
  • 135x9mm axle standard
  • BSA bottom bracket standard
frame size XXS, XS, S, M, L
  • Coil
  • 63mm suspension travel
  • Lockout
brake front Shimano MT-200
brake rear Shimano MT-200
brake lever Shimano MT-200
headset MERIDA M2346 Neck
  • material: aluminium
  • 660mm width
  • 25mm rise
  • material: aluminium
  • 31.8mm diameter
  • adjustable
  • 80 mm-XXS/XS/S, 90 mm-M/L, 100 mm-XL
derailleur (f) Shimano M370
derailleur (r) Shimano Alivio
shifter front Shimano Altus
shifter rear Shimano Altus
  • 30.9mm diameter
  • 10mm setback
  • 40mm seatpost suspension travel
seat clamp MERIDA EXPERT
saddle MERIDA Cross Sport
pedal VP VPE-891
chain KMC M99
chainguard attached
  • 48-36-26 teeth
  • 170 mm-XS/S, 175 mm-M/XL
crank size 170 mm-XS/S, 175 mm-M/XL
  • 11-34 teeth
  • 9 speed
bottom braket FSA TH-7420ST Cartridge Bearing
  • 20mm inner width
  • 17mm height
  • material: aluminium
  • 700x40C
  • wire
  • reflective stripe, Silkshild
  • 700x40C
  • wire
  • reflective stripe, Silkshild
  • 100x9mm width front hub
  • 32 spoke holes
  • Centerlock
  • 135x9mm width rear hub
  • 32 spoke holes
  • Centerlock
axle front QR
spokes Black stainless

weighed at frame size S without pedals

Bike Frame Geometry Image
Frame Size XXS XS S M L
Tire Sizes 28" 28" 28" 28" 28"
Frame Size CM 39 43 47 51 55
ST seat tube [mm] 390 430 470 510 550
TT top tube [mm] 560 565 580 590 610
CS chain stay length [mm] 460 460 460 460 460
HTA head tube angle [°] 70.5 70.5 71 71 71.5
STA seat tube angle [°] 74 74 73.5 73.5 73
BD bottom bracked drop [mm] 70 70 70 70 70
HT head tube [mm] 130 130 140 155 175
FL fork length [mm] 460 460 460 460 460
R reach [mm] 385 390 396 402 409
S stack [mm] 611 611 622 637 658
WB wheel base [mm] 1080 1085 1089 1100 1109
SH stand over height [mm] 650 650 650 651 651
Body Height Cm < 149 145 - 160 155 - 170 161 - 180 > 171


Most CROSSWAY models are also available in a low step through frame, providing an opportunity to find the perfect fit without compromising on equipment and functionality.

6061 double butted and technoformed aluminium frame with a concealed cable channel underneath. Tapered head tube for confidence inspiring handling. Graceful lines with smooth welding. Equipped with mounts for rack, mudguards and kickstand.

Our CROSSWAY models are equipped with suspension forks and suspension seat posts, on most models, to iron out any surface bumps. Adjustable ahead stems are also fitted (now including our SPEED models), providing an adjustable riding position for maximum sitting comfort on the bike. The exceptions are the sportier models that feature a regular seat post and stem.

All CROSSWAY 100 up to XT-EDITION models feature tyres with reflective strips on their sidewalls, improving visibility on the road.

Mudguards, racks and kickstands can be added to all CROSSWAY models, making them usable in many circumstances.




Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.



Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.



We use a minimum of 6061 aluminium. The pay back is that it’s possible to make lighter and more advanced frames. We use an additional heat treatment and double-butted wall thicknesses to produce light and stiff frames.



Technoforming is a mechanical forming process, shaping the tubes by using negative moulds, at times combined with an internal metal core. 



‘F-Mount’ equipped bikes have integrated fittings for mud guards (some bikes require model specific mud guards), making fitting fast and simple.



Integrated mount on the chainstay to fit a MERIDA kickstand (or any commercial kickstand).



‘C-Mount’ equipped bikes have the fixing points for a rear rack already integrated (some bikes require model specific rear rack), making fitting fast, simple and reliable.