REACTO TRACK 500

 

REACTO TRACK 500

Color variants

REACTO TRACK 500
frame REACTO TRACK
frame size XS, S, S/M, M/L, L, XL
color GREEN (BLACK)
fork MERIDA REACTO TRACK CF2
headset MERIDA M2331 Neck
handlebar MERIDA Expert FX
  • 31.8mm diameter
  • -5° stem angle
grip MERIDA Road Expert
shifter front no
shifter rear no
  • Aero shape
  • 15mm setback
  • Carbon
seat clamp MERIDA REACTO
saddle MERIDA Comp SL
chain KMC Z610HX
  • 17mm inner width
  • 35mm height
  • 9x100mm width front hub
  • 24 spoke holes
  • 9x130mm width rear hub
  • 28 spoke holes
axle front Track nut
axle rear Track nut
spokes Double Butted Black stainless

weighed at frame size M/L (w/o pedals)

Bike Frame Geometry Image
Frame Size XS S S/M M/L L XL
Tire Sizes 28" 28" 28" 28" 28" 28"
Frame Size CM 47 50 52 54 56 59
ST seat tube [mm] 470 500 520 540 560 590
TT top tube [mm] 518 530 545 560 575 590
CS chain stay length [mm] 411(46/15T) 411(46/15T) 411(46/15T) 411(46/15T) 411(46/15T) 411(46/15T)
HTA head tube angle [°] 71 72 73 73 73 73
STA seat tube angle [°] 74 74 73.5 73 73 73
BD bottom bracked drop [mm] 55 55 55 55 55 55
HT head tube [mm] 95 105 120 135 150 165
FL fork length [mm] 369 369 369 369 369 369
R reach [mm] 381 389 394 400 411 421
S stack [mm] 479 492 510 524 538 553
WB wheel base [mm] 966 970 971 982 997 1012
SH stand over height [mm] 739 764 783 800 818 843
Body Height Cm < 167 163 - 172 168 - 177 173 - 182 178 - 187 > 183

CATEGORY HIGHLIGHTS

Lightweight 6066 series aluminium, triple butted and hydroformed into an aerodynamic shape. Featuring a tapered head tube and adjustable rear dropouts.

Perfectly designed for an impressive look: It is difficult to spot the tube-to-tube transitions of our ‘One Piece Seat tube’.

All REACTO models feature a full carbon fork with a tapered steerer to give precise, confidence inspiring handling. Aluminium and CF2 carbon models feature a ‘regular’ 1 1/8" to 1 1/2" taper. The high end CF4 frame has a slimmed down front profile and uses a 1 1/8" to 1 1/4" taper.

Speed is everything – that is raison d'être for track bikes. The down tube and seat tube feature the ‘NACA Fastback’ tube profile which, due to its truncated drop shape, enables perfect airflow at the lowest possible weight.

As comfort is not a major priority for a track bike, it’s fitted with fast rolling 23 mm tyres.

The adjustability of the horizontal dropouts on our REACTO TRACK is vast, allowing a broad range of chain ring sizes to be used without the need to adjust the chain.

Not everybody goes this far: Right from the start, the frame of our REACTO TRACK is UCI certified and therefore is ready to be raced – at any level.

Technologies

IMAGE

PROLITE 66 TRIPLE BUTTED ALUMINUM

Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.

IMAGE

X-TAPER HEADTUBE

Our X-Tapered headtube offers the space for a tapered fork to be fitted. Tapered forks offer superb stiffness and precise and deliver confidence-inspiring steering.

IMAGE

SMOOTH WELDING

Sometimes called ‘double pass welding’, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.

IMAGE

NACA FASTBACK PROFILE

The aerodynamics are based around a NACA0028 teardrop profile (National Advisory Committee for Aeronautics) which is truncated. Air moves around the tube as though the missing rear section of the teardrop were still there, saving weight by using less material.

IMAGE

INTERNAL CLAMP

Designing WorldTour bikes is similar to Formula 1: apparently nondescript details can result in saving split seconds. Integrated seat-post clamping minimises turbulence at the top tube.