You shouldn’t have to spend a fortune to get a bike that can take on everything from enduro races to epic, big mountain descents or gnarly bike parks. The ONE-SIXTY 500 gets our radical test and award-winning geometry and suspension design in a tough all-aluminium frame package, paired to components that deliver rock-solid performance and ironclad value. A RockShox Domain fork and Deluxe shock can take the rough with the rougher, while the four-piston Shimano brakes and wide-range drivetrain are tough and consistent.
Evolution or revolution? How about both? The ONE-SIXTY is a radical, award-winning design that pushes our hard-hitting enduro platform to new heights. Just as well, because once it’s there it’s ready to rip the longest, toughest descents too. Our proven suspension system uses a flexstay design with an adjustable rocker, so whether you choose to run it as a full 29er (162 mm travel) or mixed 29/27.5” setup (171 mm travel), the geometry is preserved. There’s a radically steep 79° seat tube angle for goat-like climbing and slack 64° head angle plus 170 mm fork to deal with downhill trail chaos. Our AGILOMETER sizing allows riders to run a longer or shorter reach frame independently of their height, while suspension becomes more progressive as you size up, all with long-travel dropper posts. WIRE PORT cable routing plus reliable threaded bottom bracket round out the package, while carbon frames offer on-board tool storage and FidLock magnetic bottle cages.
- Full aluminium frame with FAST kinematic suspension and radical enduro geometry
- Mixed or full 29er wheels with AGILOMETER sizing
- RockShox Domain and Deluxe suspension, proven Shimano 12-speed drivetrain
- Maxxis Double Down rear and EXO+ front tyres
- Long-travel dropper post
- Powerful 4-piston hydraulic disc brakes
Awards & Media
- 171 mm suspension travel mullet / 162 mm suspension travel 29"
- material: aluminium
- 29x2.5" max. wheelsize
- 148x12 mm axle standard
- BSA bottom bracket standard
- Air
- 170 mm suspension travel
- Tapered
- 44 mm fork offset
- 29.5x2.8" max. wheelsize
- lockout
- 4 piston
- 203 mm
- Upper and lower IPS sealing
- 34.9 mm diameter
- 0 mm setback
- XS/S: 150 mm travel seatpost - M: 170 mm travel seatpost - L/XL: 200 mm travel seatpost
- V-mount
- 32 teeth
- 170 mm for all sizes
- 10-51 teeth
- 12 speed
- 110x15 mm width front hub
- 32 spoke holes
- Centerlock
- 148x12 mm width rear hub
- 32 spoke holes
- Centerlock
- 28 mm inner width
- material: aluminium
- Tubeless ready (tubeless tape and valves not included)
- rear 27.5" up to Size M / L & XL rear 29"
- 29x2.5"
- fold
- TR EXO+ 3C MaxxGrip
- 27.5x2.4" XS/S/M 29x2.4" L/XL
- fold
- TR DD 3C MaxxTerra
- including removeable lever, 6/4 mm allen key
- weighed at frame size M
- Weight may vary depending on bike size, finish or possible specification changes due to supply chain issues.
- Total weight of bike, rider and luggage
Frame Size | XShort | Short | Mid | Long | XLong |
Tyre Sizes | 29/27.5" | 29/27.5" | 29/27.5" | 29" | 29" |
ST seat tube [mm] | 400 | 410 | 425 | 445 | 470 |
TT top tube [mm] | 535 | 562 | 589 | 621 | 653 |
CS chain stay length [mm] | 434 | 434 | 434 | 437.5 | 437.5 |
HTA head tube angle [°] | 64 | 64 | 64 | 64 | 64 |
STA seat tube angle [°] | 79 | 79 | 79 | 79 | 79 |
BD bottom bracket drop [mm] | 7 | 7 | 7 | 27.5 | 27.5 |
HT head tube [mm] | 95 | 95 | 95 | 105 | 120 |
FL fork length [mm] | 581 | 581 | 581 | 581 | 581 |
R reach [mm] | 415 | 442 | 470 | 498 | 525 |
S stack [mm] | 615 | 615 | 615 | 625 | 638 |
WB wheel base [mm] | 1188 | 1215 | 1242 | 1275 | 1308 |
SH stand over height [mm] | 735 | 740 | 743 | 740 | 735 |
No. | Item-No. | Name | Info | Pieces | Torque NM |
1 | A2300000625 | BOLT | M6x1 OD10mm L39mm | 1 | |
2 | A2294000196 | WASHER | for M6 sunkenhead screw OD16mm | 1 | |
3 | A2298000113 | SCREW | M6x1 L16mm | 2 | 8~10 |
4 | A2300000608 | SCREW | M8x1 | 1 | 11~12 |
5 | A2292000102 | WASHER | OD19mm ID15mm H0,3mm | 1 | |
6 | A2036000032 | MOUNT | for shock without bushing | 1 | |
7 | A2294000102 | WASHER | OD21mm ID17.1mm H3mm | 5 | |
8 | A2221000058 | BEARING | 6803V-2RS OD26mm ID17mm W5mm | 4 | |
9 | A2294000182 | LOCK RING | for bearing | 2 | |
10 | A2300000684 | SCREW | M15x1 L16mm | 2 | 23~25 |
11 | A2294000105 | WASHER | OD17mm ID12.1mm H2mm | 1 | |
12 | A2294000205 | WASHER | OD15.5mm ID10.1mm H2mm | 1 | |
13 | A2221000035 | BEARING | 6801V-2RS OD21mm ID12mm W5mm | 1 | |
14 | A2221000034 | BEARING | 6800V-2RS OD19mm ID10mm W5mm | 1 | |
15 | A2294000197 | WASHER | for M6 sunkenhead screw OD18.5mm | 1 | |
16 | A2300000475 | BOLT | M6x1 OD10/12mm L55mm | 1 | 8~10 |
17 | A2300000683 | SCREW | M15x1 L18.5mm | 2 | 23~25 |
18 | A2302000082 | NUT | M15x1 flipchip | 2 | |
19 | A2031000093 | LINK | 1 | ||
20 | A2258000239 | CABLE GUIDE | 1 | ||
21 | A2300000151 | SCREW | M4x0.7 L12mm | 1 | 3~5 |
22 | A2294000016 | WASHER | OD19mm ID15.1mm H3mm | 1 | |
23 | A2300000598 | BOLT | M6x1 OD15/17mm L55mm | 1 | 8~10 |
24 | A2221000040 | BEARING | 172607V-2RS OD26mm ID17mm W7mm | 1 | |
25 | A2221000043 | BEARING | 3802V-2RS OD24mm ID15mm W7mm | 1 | |
26 | A2300000609 | SCREW | M10x1 L15mm | 1 | 15~17 |
27 | A2311000102 | RD-HANGER | UDH | 1 | |
1 | A21610000211 | CABLE GUIDE | for headtube | 1 | |
2 | A2161000227 | MOUNT | for tube/accesoires | 1 | |
3 | A2298000004 | SCREW | M5x0.8 L15mm | 4 | 8~10 |
4 | A2161000079 | COVER | for service opening | 1 | |
5 | A2300000231 | SCREW | M3x0.5 L8mm | 1 | |
6 | A2164000062 | MOUNT | ISCG-05 | 1 | |
7 | A2298000107 | SCREW | M6x1 L12mm | 1 | 6~8 |
8 | A2292000008 | WASHER | OD10mm ID6.2mm H3mm | 2 | |
9 | A2232000042 | MOUNT | Mount for chain guide | 1 | |
10 | A2232000028 | CHAIN GUIDE | for 28T-36T | 1 | |
11 | A2300000484 | SCREW | M4x0.7 L10mm | 1 | 1,5~2 |
12 | A2292000106 | WASHER | OD10mm ID6.2mm H0.5mm | 2 | |
13 | A2298000224 | SCREW | M6x1 L16mm | 2 | 6~8 |
14 | A2116000239 | PROTECTOR | 1 | ||
15 | A2300000318 | SCREW | M4x0.7 L12mm | 3 | 3~5 |
16 | A2136000076 | MOUNT | PM200 | 1 | |
17 | A2298000409 | SCREW | M6x1 L12mm | 3 | 11~12 |
18 | A2158000078 | PROTECTOR | for chain stay | 1 | |
19 | A2258000117 | CABLE PLUG | for brake | 1 | |
20 | A2191000231 | HEAD SET | Acros AIX-586 | 1 | |
21 | A2358000131 | PROTECTOR | for down tube | 1 | |
22 | A2358000132 | PROTECTOR | for down tube | 1 | |
23 | A2362000121 | PROTECTOR | for seat stay | 1 | |
24 | A2002000135 | THRU AXLE | EXPERT TR; L=178.5mm M12x1 TL=13.5mm | 1 | |
25 | A2029000034 | TUBE | foam; ID5mm L600mm | 2 | |
26 | A2029000042 | TUBE | foam; ID6mm L600mm | 1 | |
27 | A2311000102 | RD-HANGER | UDH | 1 |