- 140mm suspension travel
- material: aluminium
- 27.5 wheelsize
- 148x12mm axle standard
- BB92 bottom bracket standard
- Air
- 150mm suspension travel
- Tapered
- 37mm fork offset
- lockout
- 4 piston
- 180 mm
- 30.9mm diameter
- 0mm setback
- S: 125mm travel seatpost - M 150mm travel seatpost - L/XL 170mm travel seatpost
- 32 teeth
- 170 mm-S, 175 mm-M up
- 10-51 teeth
- 12 speed
- 110x15mm width front hub
- 148x12mm width rear hub
- 30mm inner width
- Centerlock
- Shimano 12 Speed
- material: aluminium
- Tubeless ready (tubeless tape and valves included)
- 27.5x2.6"
- fold
- TR EXO 3C
- 27.5x2.6"
- fold
- TR EXO Dual
- including removeable lever, 6/4mm allen key
weighed at frame size M and 27.5" wheels without pedals
Frame Size | S | M | L | XL |
Tyre Sizes | 27.5" | 27.5" | 27.5" | 27.5" |
ST seat tube [mm] | 410 | 435 | 475 | 515 |
TT top tube [mm] | 572 | 596 | 619.7 | 643.4 |
CS chain stay length [mm] | 435 | 435 | 435 | 435 |
HTA head tube angle [°] | 66.3 | 66.3 | 66.3 | 66.3 |
STA seat tube angle [°] | 75 | 75 | 75 | 75 |
BD bottom bracket drop [mm] | 21 | 21 | 21 | 21 |
HT head tube [mm] | 95 | 110 | 125 | 140 |
FL fork length [mm] | 542 | 542 | 542 | 542 |
R reach [mm] | 415 | 435 | 455 | 475 |
S stack [mm] | 587 | 601.1 | 614.9 | 628.6 |
WB wheel base [mm] | 1144 | 1170 | 1194 | 1222 |
SH stand over height [mm] | 708 | 723 | 750 | 778 |
No. | Item-No. | Name | Info | Pieces | Torque NM |
1 | 2294004440 | WASHER | 2 | ||
2 | 2221002254 | BEARING | 6800V2RS 19D*10D*5W | 6 | |
3 | 2300011274 | SCREW | 2 | 14 | |
4 | 2300012480 | SCREW | 1 | 10 | |
5 | 2300012491 | BOLT | 1 | ||
6 | 2221002265 | BEARING | 6801V-2RS 21D*12D*5W | 2 | |
7 | 2300011285 | SCREW | 1 | 14 | |
8 | 2300011296 | BOLT | 1 | ||
9 | 2294004439 | WASHER | 2 | ||
10 | 2294004451 | WASHER | 8 | ||
11 | 2300011252 | SCREW | 4 | 11 | |
12 | 2300011263 | BOLT | 4 | ||
13 | 2294001180 | WASHER | 2 | ||
14 | 2221002395 | BEARING | 3802V-2RD 24D*15D*7W | 2 | |
15 | 2300011304 | SCREW | 1 | 12 | |
16 | 2300011315 | BOLT | 1 | ||
17 | 2311004928 | DROPOUT | DH-053 | 1 | |
18 | 2300010950 | SCREW | 2 | 4 | |
19 | 2300005272 | SCREW | 1 | 5 | |
20 | 2258003812 | CABLE GUIDE | 1 | ||
21 | SMART ENTRY |
HIGHLIGHTS
Lightweight 6016 series triple butted hydroformed aluminium tubes with smooth welding. Tapered head tube and Boost standard bolt through axles for precise handling. 'Smart Entry' cable routing for rattle free running.
The lower shock mount moves with the system to deliver plushness and pedalling efficiency. Our engineers can precisely influence the transmission ratio and progression, which means that a ‘Float Link’ system is very sensitive, delivering great support in mid-travel and the appearance of more travel that the model name suggests. The rear end creates the feeling of almost bottomless travel whilst remaining perfectly controlled when climbing.
The geometry of the ONE-FORTY is influenced heavily by its bigger brother, the ONE-SIXTY, by mimicking the short chainstays (435 mm) for increased agility and playfulness on the trail. A well-balanced reach and low centre of gravity combined with a short stem and wide handlebar deliver fun packed yet confidence inspiring handling.
A trunnion mount shock gives our frame designers more flexibility by using a shorter shock with increased stroke. Combined with the ball bearing bushing of the upper mount, shock sensitivity is increased, and the suspension performance can be perfectly tuned.
Modern trail bikes are all about simplicity, durability and efficiency and modern 1x drivetrains offer a huge gear range whilst remaining lightweight. Building our frame around a 1x specific setup allows us to keep chainstays short, adding to the agility and playfulness of the bike. Perfect for today’s demanding trails.
The ONE-FORTY has clearance for up to 2.6" wide 650B tyres, allowing plenty of extra room to fit the right tyre for the track. Extra wide tyres deliver increased levels of grip and comfort when the track gets rougher and more demanding, significantly improving the overall handling and riding experience.
Cables, housings and brake hoses are clamped under tension to prevent rattling when the trail gets rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.